UNITED STATES SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark one)

þ		ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 FOR THE YEAR ENDED DECEMBER 31, 2006

o		TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

NATIONAL OILWELL VARCO, INC.

Delaware		76-0475815
(State or other jurisdiction		(IRS Employer
of incorporation or organization)		Identification No.)

10000 Richmond Avenue
Houston, Texas
77042-4200

(713) 346-7500

Securities registered pursuant to Section 12(b) of the Act:

Common Stock, par value $.01		New York Stock Exchange
(Title of Class)		(Exchange on which registered)

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.

Yes þ No o

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15 (d) of the Act.

Yes o No þ

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.

Yes þ No o

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. o

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, or a non-accelerated filer. See definition “accelerated filer and large accelerated filer” in Rule 12b-2 of the Exchange Act. (Check one):

Large Accelerated Filer þ      Accelerated Filer o      Non-Accelerated Filer o

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes o No þ

The aggregate market value of voting and non-voting common stock held by non-affiliates of the registrant as of June 30, 2006 was $11.09 billion. As of February 16, 2007, there were 175,803,638 shares of the Company’s common stock ($0.01 par value) outstanding.

Documents Incorporated by Reference

Portions of the Proxy Statement in connection with the 2007 Annual Meeting of Stockholders are incorporated in Part III of this report.

 

 

ITEM 1. BUSINESS

General

National Oilwell Varco, Inc. (“NOV” or the “Company”), a Delaware corporation incorporated in 1995, is a leading worldwide provider of equipment and components used in oil and gas drilling and production operations, oilfield services, and supply chain integration services to the upstream oil and gas industry. The Company conducts operations in over 600 locations across six continents.

On March 11, 2005, we acquired all of the outstanding shares of Varco International, Inc. (“Varco”) with the issuance of 0.8363 shares of National-Oilwell, Inc. common stock for each Varco common share (the “Merger”). The Company then changed its name from National-Oilwell, Inc. to National Oilwell Varco, Inc. We have included the financial results of Varco in our consolidated financial statements beginning March 11, 2005, the date Varco common shares were exchanged for NOV common shares. We believe that the Merger has better positioned us to compete more effectively in the global marketplace and provide greater scale to increase service to our customers, increase our investment in research and development to accelerate innovation, and increase shareholder value. The fiscal year ending December 31, 2006 represents the first full year of operations of the combined entities.

The Company’s principal executive offices are located at 10000 Richmond Avenue, Houston, Texas 77042, its telephone number is (713) 346-7500, and its Internet web site address is http://www.nov.com. The Company’s annual reports on Form 10-K, quarterly reports on Form 10-Q and current reports on Form 8-K, and all amendments thereto, are available free of charge on its Internet website. These reports are posted on its website as soon as reasonably practicable after such reports are electronically filed with the Securities and Exchange Commission (“SEC”). The Company’s Code of Ethics is also posted on our website.

The Company has a long tradition of pioneering innovations which improve the cost-effectiveness, efficiency, safety and environmental impact of oil and gas operations. The Company’s common stock is traded on the New York Stock Exchange under the symbol “NOV.” The Company operates through three business segments: Rig Technology, Petroleum Services & Supplies, and Distribution Services.

Rig Technology

Our Rig Technology segment designs, manufactures, sells and services complete systems for the drilling, completion, and servicing of oil and gas wells. The segment offers a comprehensive line of highly-engineered equipment that automates complex well construction and management operations, such as offshore and onshore drilling rigs; derricks; pipe lifting, racking, rotating and assembly systems; coiled tubing equipment and pressure pumping units; well workover rigs; wireline winches; and cranes. Demand for Rig Technology products is primarily dependent on capital spending plans by drilling contractors, oilfield service companies, and oil and gas companies, and secondarily on the overall level of oilfield drilling activity, which drives demand for spare parts for the segment’s large installed base of equipment. We have made strategic acquisitions and other investments during the past several years in an effort to expand our product offering and our global manufacturing capabilities, including new operations in Canada, Norway, the United Kingdom, China, and Belarus.

Petroleum Services & Supplies

Our Petroleum Services & Supplies segment provides a variety of consumable goods and services used to drill, complete, remediate and workover oil and gas wells and service pipelines, flowlines and other oilfield tubular goods. The segment manufactures, rents and sells a variety of products and equipment used to perform drilling operations, including transfer pumps, solids control systems, drilling motors and other downhole tools, rig instrumentation systems, and mud pump consumables. Demand for these services and supplies is determined principally by the level of oilfield drilling and workover activity by drilling contractors, major and independent oil and gas companies, and national oil companies. Oilfield tubular services include the provision of inspection and internal coating services and equipment for drillpipe, linepipe, tubing, casing and pipelines; and the design, manufacture and sale of coiled tubing pipe and advanced composite pipe for application in highly corrosive environments. The segment sells its tubular goods and services to oil and gas companies; drilling contractors; pipe distributors, processors and manufacturers; and pipeline operators. This segment has benefited from several strategic acquisitions and other investments completed during the past few years, including operations in Canada, the United Kingdom, China, Kazakhstan, and Mexico.

Distribution Services

Our Distribution Services segment provides maintenance, repair and operating supplies and spare parts to drill site and production locations worldwide. In addition to its comprehensive network of field locations supporting land drilling operations throughout North America, the segment supports major offshore drilling contractors through locations in Mexico, the Middle East, Europe, Southeast Asia and South America. Distribution Services employs advanced information technologies to provide complete procurement, inventory management and logistics services to its customers around the globe. Demand for the segment’s services are determined primarily by the level of drilling and servicing activity, and oil and gas production activities.

The following table sets forth the contribution to the Company’s total revenues of its three operating segments for December 31, 2006, 2005, and 2004 (in millions):

		Years ended December 31,
		2006				2005				2004
Revenue:
Rig Technology		$	3,584.9			$	2,216.8			$	1,085.5
Petroleum Services & Supplies			2,425.0				1,645.8				505.5
Distribution Services			1,369.6				1,074.5				905.1
Eliminations			(353.7	)			(292.6	)			(178.0	)
Total Revenue		$	7,025.8			$	4,644.5			$	2,318.1

See Note 15 to our Consolidated Financial Statements included in this Annual Report on Form-10-K for financial information by segment and a geographical breakout of revenues and long-lived assets.

The Company has included a glossary of technical terms at the end of Item 1 of this Annual Report.

Influence of Oil and Gas Activity Levels on the Company’s Business

The oil and gas industry in which the Company participates has historically experienced significant volatility. Demand for the Company’s services and products depends primarily upon the general level of activity in the oil and gas industry worldwide, including the number of drilling rigs in operation, the number of oil and gas wells being drilled, the depth and drilling conditions of these wells, the volume of production, the number of well completions and the level of well remediation activity. Oil and gas activity is in turn heavily influenced by, among other factors, oil and gas prices worldwide. High levels of drilling and well-remediation activity generally spur demand for the Company’s products and services used to drill and remediate oil and gas wells. Additionally, high levels of oil and gas activity increase cash flows available for drilling contractors, oilfield service companies, and manufacturers of oil country tubular goods to invest in capital equipment which the Company sells.

On a worldwide basis, drilling activity was generally high in 2001, but began to decline toward the end of the year due to lower oil and gas prices. This situation persisted throughout 2002. However, beginning in late 2002, higher gas prices in the U.S. led to rising gas drilling activity in Canada and most U.S. onshore areas. Higher oil prices also led to higher drilling activity levels in 2003 in several international markets, including the Middle East, the Far East and several key Latin American markets. However, other historically important markets for the Company remained slow in 2003, including the Gulf of Mexico, the North Sea, and Venezuela. At the same time, due to the fact that the demand for capital equipment tends to lag drilling activity, the demand for the Company’s capital equipment generally weakened in 2003. This resulted in declining backlogs through the year.

Beginning in early 2004, increasing oil and gas prices led to steadily rising levels of drilling activity throughout the world. Concerns about the long-term availability of oil and gas supply also began to build. Consequently, the worldwide rig count increased 10% in 2004, 15% in 2005 and 11% in 2006. As a result of higher cash flows realized by many drilling contractors and other oilfield service companies, as well as the long-term concerns about supply-demand imbalance and the need to replace aging equipment, market conditions for capital equipment purchases have improved significantly since 2004 and 2005, resulting in higher backlogs for the Company at the end of 2006 compared to the end of 2004 and 2005. Backlog for the Company was at approximately $6.0 billion at December 31, 2006 compared to approximately $2.3 billion and $0.6 billion for December 31, 2005 and 2004, respectively.

In 2006, most of the Company’s Rig Technology revenue resulted from major capital expenditures of drilling contractors, well servicing companies, and oil companies on rig construction and refurbishment, and well servicing equipment. These capital expenditures are influenced by the amount of cash flow that contractors and service companies generate from drilling, completion, and remediation activity; as well as by the availability of financing, the outlook for future drilling and well servicing activity, and other factors. Generally the Company believes the demand for capital equipment lags increases in the level of drilling activity. The remainder of the Rig Technology segment’s revenue in 2006 was related to the sale of spare parts and consumables, the provision of equipment-repair services, and the rental of equipment, which the Company believes are generally determined directly by the level of drilling and well servicing activity.

The majority of the Company’s Petroleum Services & Supplies revenue is closely tied to drilling activity, although a portion is related to the sale of capital equipment to drilling contractors, which may somewhat lag the level of drilling activity. Portions of the segment’s revenue that are not tied to drilling activity include (i) the sale of progressive cavity pumps and solids control equipment for use in industrial applications; (ii) the performance of in-service pipeline inspections; (iii) the sale of fiberglass and composite tubing to industrial customers, which is generally unrelated to drilling or well remediation activity but may be tied somewhat to oil and gas prices; and (iv) the sale of pipe inspection equipment to the manufacturers of oil country tubular goods, which is indirectly related to drilling activity.

The Company’s revenue from Distribution Services is almost entirely driven by drilling activity and oil and gas production activities.

Drilling and well servicing activity can fluctuate significantly in a short period of time. The willingness of oil and gas operators to make capital investments to explore for and produce oil and natural gas will continue to be influenced by numerous factors over which the Company has no control, including: the ability of the members of the Organization of Petroleum Exporting Countries (“OPEC”) to maintain oil price stability through voluntary production limits of oil; the level of oil production by non-OPEC countries; supply and demand for oil and natural gas; general economic and political conditions; costs of exploration and production; the availability of new leases and concessions; and governmental regulations regarding, among other things, environmental protection, taxation, price controls and product allocations. The willingness of drilling contractors and well servicing companies to make capital expenditures for the type of specialized equipment the Company provides is also influenced by numerous factors over which the Company has no control, including: the general level of oil and gas well drilling and

servicing; rig dayrates; access to external financing; outlook for future increases in well drilling and well remediation activity; steel prices and fabrication costs; and government regulations regarding, among other things, environmental protection, taxation, and price controls.

Overview of Oil and Gas Well Drilling and Servicing Processes

Oil and gas wells are usually drilled by drilling contractors using a drilling rig. A bit is attached to the end of a drill stem, which is assembled by the drilling rig and its crew from 30-foot joints of drillpipe and specialized drilling components known as downhole tools. Using the conventional rotary drilling method, the drill stem is turned from the rotary table of the drilling rig by torque applied to the kelly, which is screwed into the top of the drill stem. Increasingly, drilling is performed using a drilling motor, which is attached to the bottom of the drill stem and provides rotational force directly to the bit, rather than such force being supplied by the rotary table. The use of a drilling motor permits the drilling contractor to drill directionally, including horizontally. The Company sells and rents drilling motors and downhole tools through its Petroleum Services & Supplies segment.

During drilling, heavy drilling fluids or “drilling muds” are pumped down the drill stem and forced out through jets in the bit. The drilling mud returns to the surface through the space between the borehole wall and the drill stem, carrying with it the drill cuttings drilled out by the bit. The drill cuttings are removed from the mud by a solids control system (which can include shakers, centrifuges and other specialized equipment) and disposed of in an environmentally sound manner. The solids control system permits the mud, which is often comprised of expensive chemicals, to be continuously reused and recirculated back into the hole.

Through its Rig Technology segment, the Company sells the large “mud pumps” that are used to pump drilling mud through the drill stem. Through its Petroleum Services & Supplies business, the Company sells transfer pumps and mud pump consumables; sells and rents solids control equipment; and provides solids control and waste management services. Many operators internally coat the drill stem to improve its hydraulic efficiency and protect it from corrosive fluids sometimes encountered during drilling, and inspect and assess the integrity of the drill pipe from time to time. The Company provides drillpipe inspection and coating services, and applies “hardbanding” material to drillpipe to improve its wear characteristics. These services are provided through the Company’s Petroleum Services & Supplies segment.

As the hole depth increases, the kelly must be removed frequently so that additional 30-foot joints of drill pipe can be added to the drill stem. When the bit becomes dull or the equipment at the bottom of the drill stem – including the drilling motors – otherwise requires servicing, the entire drill stem is pulled out of the hole and disassembled by disconnecting the joints of drillpipe. These are set aside or “racked,” the old bit is replaced or service is performed, and the drill stem is reassembled and lowered back into the hole (a process called “tripping”). During drilling and tripping operations, joints of drill pipe must be screwed together and tightened (“made up”), and loosened and unscrewed (“spun out”). The Company’s Rig Technology business provides drilling equipment to manipulate and maneuver the drill pipe in this manner. When the hole has reached certain depths, all of the drill pipe is pulled out of the hole and larger diameter pipe known as casing is lowered into the hole and permanently cemented in place in order to protect against collapse and contamination of the hole. The casing is typically inspected before it is lowered into the hole, a service the Company’s Petroleum Services & Supplies business provides. The Company’s Rig Technology segment manufactures pressure pumping equipment that is used to cement the casing in place.

The raising and lowering of the drill stem while drilling or tripping, and the lowering of casing into the wellbore, are accomplished with the rig’s hoisting system. A conventional hoisting system is a block and tackle mechanism that works within

the drilling rig’s derrick. The lifting of this mechanism is performed via a series of pulleys that are attached to the drawworks at the base of the derrick. The Company’s Rig Technology segment sells and installs drawworks and pipe hoisting systems.

During the course of normal drilling operations, the drill stem passes through different geological formations, which exhibit varying pressure characteristics. If this pressure is not contained, oil, gas and/or water would flow out of these formations to the surface. The two means of containing these pressures are (i) primarily the circulation of drilling muds while drilling and (ii) secondarily the use of blowout preventers should the mud prove inadequate and in an emergency situation. The Company’s Rig Technology group sells and services blowout preventers.

Drilling muds are carefully designed to exhibit certain qualities that optimize the drilling process. In addition to containing formation pressure, they must (i) provide power to the drilling motor, (ii) carry drilled solids to the surface, (iii) protect the drilled formations from being damaged, and (iv) cool the drill bit. Achieving these objectives often requires a formulation specific to a given well and can involve the use of expensive chemicals as well as natural materials such as certain types of clay. The fluid itself is often oil or more-expensive synthetic mud. Given this expense, it is highly desirable to reuse as much of the drilling mud as possible. Solids control equipment such as shale shakers, centrifuges, cuttings dryers, and mud cleaners help accomplish this objective. The Company’s Petroleum Services & Supplies group rents, sells, operates and services this equipment. Drilling muds are formulated based on expected drilling conditions. However, as the hole is drilled, the drill stem may encounter a high pressure zone where the mud density is inadequate to maintain sufficient pressure. Should efforts to “weight up” the mud in order to contain such a pressure kick fail, a blowout could result, whereby reservoir fluids would flow uncontrolled into the well. To prevent blowouts to the surface of the well, a series of high-pressure valves known as blowout preventers (“BOPs”) are positioned at the top of the well and, when activated, form tight seals that prevent the escape of fluids. When closed, conventional BOPs prevent normal rig operations. Therefore, the BOPs are activated only if drilling mud and normal well control procedures cannot safely contain the pressure. BOPs have been designed to contain pressures of up to 20,000 psi.

The operations of the rig and the condition of the drilling mud are closely monitored by various sensors, which measure operating parameters such as the weight on the rig’s hook, the incidence of pressure kicks, the operation of the drilling mud pumps, etc. Through its Petroleum Services & Supplies business, the Company sells and rents drilling rig instrumentation packages that perform these monitoring functions.

During the drilling and completion of a well, there exists an ongoing need for various consumables and spare parts. While most of these items are small, in the aggregate they represent an important element of the process. Since it is impractical for each drilling location to have a full supply of these items, drilling contractors and well service companies tend to rely on third parties to stock and deliver these items. The Company provides this capability through its Distribution Services segment, which stocks and sells spares and consumables made by third parties, as well as spares and consumables by the company.

After the well has reached its total depth and the final section of casing has been set, the drilling rig is moved off of the well and the well is prepared to begin producing oil or gas in a process known as “well completion.” Well completion usually involves installing production tubing concentrically in the casing. Due to the corrosive nature of many produced fluids, production tubing is often inspected and coated, services offered by the Company’s Petroleum Services & Supplies business. Sometimes operators choose to use corrosion resistant composite materials (which the Company offers through its Petroleum Services & Supplies business), or corrosion-resistant alloys, or operators sometimes pump fluids into wells to inhibit corrosion.

From time to time, a producing well may undergo workover procedures to extend its life and increase its production rate. Workover rigs are used to disassemble the wellhead, tubing and other completion components of an existing well in order to stimulate or remediate the well. Workover rigs are similar to drilling rigs in their capabilities to handle tubing, but are usually smaller and somewhat less sophisticated. The Company offers a comprehensive range of workover rigs through its Rig Technology segment. Tubing and sucker rods removed from a well during a well remediation operation are often inspected to determine their suitability to be reused in the well, which is a service the Company’s Petroleum Services & Supplies business provides.

Frequently coiled tubing units or wireline units are used to accomplish certain well remediation operations or well completions. Coiled tubing is a recent advancement in petroleum technology consisting of a continuous length of reeled steel tubing which can be injected concentrically into the production tubing all the way to the bottom of most wells. It permits many operations to be performed without disassembling the production tubing, and without curtailing the production of the well. Wireline winch units are devices that utilize single-strand or multistrand wires to perform well-remediation operations, such as lowering tools and transmitting data to the surface. Through the Rig Technology group, the Company sells and rents various types of coiled tubing equipment, and wireline equipment and tools. The Company also manufactures and sells coiled tubing pipe through its Petroleum Services & Supplies segment.

Rig Technology

The Company has a long tradition of pioneering innovations in drilling and well servicing equipment which improve the efficiency, safety, and cost of drilling and well servicing operations. The Rig Technology group designs, manufactures and sells a wide variety of top drives, automated pipe handling systems, motion compensation systems, rig controls, BOPs, handling tools, drawworks, risers, rotary tables, mud pumps, cranes, drilling motors and other drilling equipment for both the onshore and offshore markets. The Rig Technology group also manufactures entire rig packages, both drilling and workover, as well as well servicing equipment such as coiled tubing units, pressure pumping equipment, and wireline winches.

The Rig Technology group sells directly to drilling contractors, shipyards and other rig fabricators, well servicing companies, national oil companies, major and independent oil and gas companies, supply stores, and pipe-running service providers. Demand for its products, several of which are described below, is strongly dependent upon capital spending plans by oil and gas companies and drilling contractors, and the level of oil and gas well drilling activity.

Land Rig Packages. NOV designs, manufactures, assembles, upgrades, and supplies equipment sets to a variety of land drilling rigs, including those specifically designed to operate in harsh environments such as the Arctic Circle and the desert. Our key land rig product names include the Ideal Rig and Rapid Rig. NOV’s recent rig packages are designed to be fast moving, to utilize AC technology, and to reduce manpower required to operate a rig.

Top Drives. The Top Drive Drilling System (“TDS”), originally introduced by NOV in 1982, significantly alters the traditional drilling process. The TDS rotates the drill stem from its top, rather than by the rotary table, with a large electric motor affixed to rails installed in the derrick that traverses the length of the derrick to the rig floor. Therefore, the TDS eliminates the use of the conventional rotary table for drilling. Components of the TDS also are used to connect additional joints of drill pipe to the drill stem during drilling operations, enabling drilling with three joints of drill pipe compared to traditionally drilling with one joint of drill pipe. Additionally, the TDS facilitates horizontal and extended reach drilling.

Drilling Motors. NOV has helped lead the application of AC motor technology in the oilfield industry. We are now transitioning from buying motors from third parties to building them in our own facilities and further developing motor technology, including the introduction of permanent magnet motor technology to the industry. These permanent magnet motors are being used in top drives, cranes, mud pumps, winches, and drawworks.

Rotary Equipment. The alternative to using a TDS to rotate the drill stem is to use a rotary table, which rotates the pipe at the floor of the rig. The Rig Technology group produces rotary tables as well as kelly bushings and master bushings for most sizes of kellys and makes of rotary tables. In 1998, NOV introduced the Rotary Support Table for use on rigs with a TDS. The Rotary Support Table is used in concert with the TDS to completely eliminate the need for the larger conventional rotary table.

Pipe Handling Systems. Pipe racking systems are used to handle drill pipe, casing and tubing on a drilling rig. Vertical pipe racking systems move drill pipe and casing between the well and a storage (“racking”) area on the rig floor. Horizontal racking systems are used to handle tubulars while stored horizontally (for example, on the pipe deck of an offshore rig) and transport tubulars up to the rig floor and into a vertical position for use in the drilling process.

Vertical pipe racking systems are used predominantly on offshore rigs and are found on almost all floating rigs. Mechanical vertical pipe racking systems greatly reduce the manual effort involved in pipe handling. Pipe racking systems, introduced by NOV in 1985, provide a fully automated mechanism for handling and racking drill pipe during drilling and tripping operations, spinning and torquing drill pipe, and automatic hoisting and racking of disconnected joints of drill pipe. These functions can be integrated via computer controlled sequencing, and operated by a driller in an environmentally secure cabin. An important element of this system is the Iron Roughneck, which was originally introduced by NOV in 1976 and is an automated device that makes pipe connections on the rig floor and requires less direct involvement of rig floor personnel in potentially dangerous operations. The Automated Roughneck is an automated microprocessor-controlled version of the Iron Roughneck.

Horizontal pipe transfer systems were introduced by NOV in 1993. They include the Pipe Deck Machine (“PDM”), which is used to manipulate and move tubulars while stored in a horizontal position; the Pipe Transfer Conveyor (“PTC”), which transports sections of pipe to the rig floor; and a Pickup Laydown System (“PLS”), which raises the pipe to a vertical position for transfer to a vertical racking system. These components may be employed separately, or incorporated together to form a complete horizontal racking system, known as the Pipe Transfer System (“PTS”).

Pipe Handling Tools. The Company’s pipe handling tools are designed to enhance the safety, efficiency and reliability of pipe handling operations. Many of these tools have provided innovative methods of performing the designated task through mechanization of functions previously performed manually. The Rig Technology group manufactures various tools used to grip,

hold, raise, and lower pipe, and in the making up and breaking out of drill pipe, workstrings, casing and production tubulars including spinning wrenches, manual tongs, torque wrenches and kelly spinners.

Mud Pumps. Mud pumps are high pressure pumps located on the rig that force drilling mud down the drill pipe, through the drill bit, and up the space between the drill pipe and the drilled formation (the annulus) back to the surface. These pumps, which generate pressures of up to 7500 psi, must therefore be capable of displacing drilling fluids several thousand feet down and back up the well bore. The conventional mud pump design, known as the triplex pump, uses three reciprocating pistons oriented horizontally. Recently, NOV has introduced the HEX Pump, which uses six pumping cylinders, versus the three used in the triplex pump. Along with other design features, the greater number of cylinders reduces pulsations (or surges) and increases the output available from a given footprint. Reduced pulsation is desirable where downhole measurement equipment is being used during the drilling process, as is often the case in directional drilling.

Hoisting Systems. Hoisting systems are used to raise or lower the drill stem while drilling or tripping, and to lower casing into the wellbore. The drawworks is the heart of the hoisting system. It is a large winch that spools off or takes in the drilling line, which is in turn connected to the drill stem at the top of the derrick. The drawworks also plays an important role in keeping the weight on the drill bit at a desired level. This task is particularly challenging on offshore drilling rigs, which are subject to wave motion. To address this, NOV has introduced the Active Heave Drilling (“AHD”) Drawworks. The AHD Drawworks uses computer-controlled motors to compensate for the motion experienced in offshore drilling operations.

Cranes. NOV provides a comprehensive range of crane solutions, with purpose-built products for all segments of the oil and gas industry as well as many other markets. The Company encompasses a broad collection of brand names with international recognition, and includes a large staff of engineers specializing in the design of cranes and related equipment. The product range extends from small cargo-handling cranes to the world’s largest marine cranes. In all, the Company provides over twenty crane product lines that include standard model configurations as well as custom-engineered and specialty cranes.

Motion Compensation Systems. Traditionally, motion compensation equipment is located on top of the drilling rig and serves to stabilize the bit on the bottom of the hole, increasing drilling effectiveness of floating offshore rigs by compensating for wave and wind action. The AHD Drawworks, discussed above, was introduced to eliminate weight and improve safety, removing the compensator from the top of the rig and integrating it into the drawworks system. In addition to the AHD Drawworks, NOV has introduced an Active Heave Compensation (“AHC”) System that goes beyond the capabilities of the AHD Drawworks to handle the most severe weather. Additionally, NOV tensioning systems provide continuous axial tension to the marine riser pipe (larger diameter pipe which connects floating drilling rigs to the well on the ocean floor) and guide lines on floating drilling rigs, tension leg platforms and jack-up drilling rigs.

Blow-out Preventers. BOPs are devices used to seal the space (“annulus”) between the drill pipe and the borehole to prevent blow-outs (uncontrolled flows of formation fluids and gases to the surface). The Rig Technology group manufactures a wide array of BOPs used in various situations. Ram and annular BOPs are back-up devices that are activated only if other techniques for controlling pressure in the wellbore are inadequate. When closed, these devices prevent normal rig operations. Ram BOPs seal the wellbore by hydraulically closing rams (thick heavy blocks of steel) against each other across the wellbore. Specially designed packers seal around specific sizes of pipe in the wellbore, shear pipe in the wellbore or close off an open hole. Annular BOPs seal the wellbore by hydraulically closing a rubber packing unit around the drill pipe or kelly or by sealing against itself if nothing is in the hole. NOV’s Pressure Control While Drilling (“PCWD”) BOP, introduced in 1995, allows operators to drill at pressures up to 2,000 psi without interrupting normal operations, and can act as a normal spherical BOP at pressures up to 5,000 psi.

In 1998, NOV introduced the NXT^® ram type BOP which eliminates door bolts, providing significant weight, rig-time, and space savings. Its unique features make subsea operation more efficient through faster ram configuration changes without tripping the BOP stack. In 2004, NOV introduced the LXT, which features many of the design elements of the NXT, but is targeted at the land market. In 2005, the Company began commercializing technology related to a continuous circulation device. This device enables drilling contractors to make and break drill pipe connections without stopping the circulation of drilling fluids, which helps increase drilling efficiency.

Derricks and substructures. Drilling activities are carried out from a drilling rig. A drilling rig consists of one or two derricks; the substructure that supports the derrick(s); and the rig package, which consists of the various pieces of equipment discussed above. The Rig Technology segment designs, fabricates and services derricks used in both onshore and offshore applications, and substructures used in onshore applications. The Rig Technology group also works with shipyards in the fabrication of substructures for offshore drilling rigs.

Coiled Tubing Equipment. Coiled tubing consists of flexible steel tubing manufactured in a continuous string and spooled on a reel. It can extend several thousand feet in length and is run in and out of the wellbore at a high rate of speed by a hydraulically operated coiled tubing unit. A coiled tubing unit is typically mounted on a truck or skid (steel frames on which portable

equipment is mounted to facilitate handling with cranes or flatbed trucks) and consists of a hydraulically operated tubing reel or drum, an injector head which pushes or pulls the tubing in or out of the wellbore, and various power and control systems. Coiled tubing is typically used with sophisticated pressure control equipment which permits the operator to continue to safely produce the well. The Rig Technology group manufactures and sells both coiled tubing units and the ancillary pressure control equipment used in these operations. Through its acquisition of Rolligon in late 2006, the Company enhanced its portfolio by adding additional pressure pumping and coiled tubing equipment products.

Currently, most coiled tubing units are used in well remediation and completion applications. The Company believes that advances in the manufacturing process of coiled tubing, tubing fatigue protection and the capability to manufacture larger diameter and increased wall thickness coiled tubing strings have resulted in increased uses and applications for coiled tubing products. For example, some well operators are now using coiled tubing in drilling applications such as slim hole reentries of existing wells. NOV engineered and manufactured the first coiled tubing units built specifically for coiled tubing drilling in 1996.

Generally, The Rig Technology group supplies customers with the equipment and components necessary to use coiled tubing, which the customers typically purchase separately. The group’s coiled tubing product line consists of coiled tubing units, coiled tubing pressure control equipment, pressure pumping equipment, snubbing units (which are units that force tubulars into a well when pressure is contained within the wellbore), nitrogen pumping equipment and cementing, stimulation, fracturing and blending equipment.

Wireline Equipment. NOV’s wireline products include wireline drum units, which consist of a spool or drum of wireline cable, mounted in a mobile vehicle or skid, which works in conjunction with a source of power (an engine mounted in the vehicle or within a separate “power pack” skid). The wireline drum unit is used to spool wireline cable into or out of a well, in order to perform surveys inside the well, sample fluids from the bottom of the well, retrieve or replace components from inside the well, or to perform other well remediation or survey operations. The wireline used may be “slickline,” which is conventional steel cable used to convey tools in or out of the well, or “electric line,” which contains an imbedded single-conductor or multi-conductor electrical line which permits communication between the surface and electronic instruments attached to the end of the wireline at the bottom of the well.

Wireline units are usually used in conjunction with a variety of other pressure control equipment which permit safe access into wells while they are flowing and under pressure at the surface. The company engineers and manufactures a broad range of pressure control equipment for wireline operations, including wireline blowout preventers, strippers, packers, lubricators and grease injection units. Additionally, the Company makes wireline rigging equipment such as mast trucks.

Facilities. The Company conducts Rig Technology manufacturing operations at major facilities in Houston, Galena Park, Sugar Land, Conroe, Anderson, Fort Worth and Pampa, Texas; Tulsa and Duncan, Oklahoma; Orange, California; Calgary, Nisku and Edmonton, Canada; Mexicali, Mexico; Kristiansand and Stavanger, Norway; Etten-Leur, the Netherlands; Carquefou, France; Lanzhou and Shanghai, China; and Jebal Ali, UAE. The Rig Technology group maintains sales and service offices in most major oilfield markets, either directly or through agents.

Customers and Competition. The Rig Technology segment sells directly to drilling contractors, other rig fabricators, well servicing companies, pressure pumping companies, national oil companies, major and independent oil and gas companies, supply stores, and pipe-running service providers. Demand for its products is strongly dependent upon capital spending plans by oil and gas companies and drilling contractors, and the level of oil and gas well drilling activity.

The products of the Rig Technology group are sold in highly competitive markets and its sales and earnings can be affected by competitive actions such as price changes, new product development, or improved availability and delivery. The group’s primary competitors are Access Oil Tools; Aker Kvaerner AS; American Block; Bomco; Canrig (a division of Nabors Industries); Cavins Oil Tools; Cameron; DenCon Oil Tools; Hydril Company; Hong Hua; IDM; LEWCO (a division of Rowan Companies); M&I Electric; Tesco Corporation; Wirth M&B GmbH; Stewart & Stevenson, Inc.; ASEP; Crown Energy Technologies; Huntings, Ltd.; Vanoil; Parveen Industries; and Weatherford International, Inc. Management believes that the principal competitive factors affecting its Drilling Equipment business are performance, quality, reputation, customer service, availability of products, spare parts, and consumables, and breadth of product line and price.

Petroleum Services & Supplies

The Company provides a broad range of support equipment, spare parts, consumables and services through the Petroleum Services & Supplies segment. The Petroleum Services & Supplies group sells directly to drilling contractors; well servicing companies; oil and gas producers; national oil companies; tubular processors, manufacturers and distributors; oilfield distributors; and pipeline operators.

The Petroleum Services & Supplies group provides a variety of tubular services, composite tubing, and coiled tubing to oil and gas producers, national oil companies, drilling contractors, well servicing companies, pipeline operators, and tubular processors, manufacturers and distributors. These include inspection and reclamation services for drill pipe, casing, production tubing, sucker rods and line pipe at drilling and workover rig locations, at yards owned by its customers, at steel mills and processing facilities that manufacture tubular goods, and at facilities which it owns. The group also provides internal coating of tubular goods at several coating plants worldwide and through licensees in certain locations. Additionally, the Company designs, manufactures and sells high pressure fiberglass and composite tubulars for use in corrosive applications and coiled tubing for use in well servicing applications; and provides in-service inspection of oil, gas and product transmission pipelines through its application of instrumented survey tools (“smart pigs”) which it engineers, manufactures and operates.

The Company’s customers rely on tubular inspection services to avoid failure of tubing, casing, flowlines, pipelines and drill pipe. Such tubular failures are expensive and in some cases catastrophic. The Company’s customers rely on internal coatings of tubular goods to prolong the useful lives of tubulars and to increase the volumetric throughput of in-service tubular goods. The Company’s customers sometimes use fiberglass or composite tubulars in lieu of conventional steel tubulars, due to the corrosion-resistant properties of fiberglass and other composite materials. Tubular inspection and coating services are used most frequently in operations in high-temperature, deep, corrosive oil and gas environments. In selecting a provider of tubular inspection and tubular coating services, oil and gas operators consider such factors as reputation, experience, technology of products offered, reliability and price.

The Company’s Petroleum Services & Supplies group also provides products and services that are used in the course of drilling oil and gas wells. The Downhole Tools business sells and rents drilling motors and specialized downhole tools that are incorporated into the drill stem during drilling operations (“Downhole Tools”), and are also used during fishing, well intervention, re-entry, and well completion operations. The Solids Control business is engaged in the provision of highly-engineered equipment, products and services which separate and manage drill cuttings produced by the drilling process (“Solids Control”). Drill cuttings are usually contaminated with petroleum or drilling fluids, and must be disposed of in an environmentally sound manner. Additionally, efficient separation of drill cuttings enables the re-use of often costly drilling fluids. The Instrumentation business rents and sells proprietary drilling rig instrumentation packages and control systems which monitor various processes throughout the drilling operation, under the name MD/Totco (“Instrumentation”). The Pumps & Expendables business provides centrifugal, reciprocating, and progressing cavity pumps and pump expendables (“Pumps & Expendables”) into the global oil and gas and industrial markets.

Tubular Coating. The Company develops, manufactures and applies its proprietary tubular coatings, known as Tube-Kote^® coatings, to new and used tubulars. Tubular coatings help prevent corrosion of tubulars by providing a tough plastic shield to isolate steel from corrosive oilfield fluids such as CO₂, H₂S and brine. Delaying or preventing corrosion extends the life of existing tubulars, reduces the frequency of well remediation and reduces expensive interruptions in production. In addition, coatings are designed to increase the fluid flow rate through tubulars by decreasing or eliminating paraffin and scale build-up, which can reduce or block oil flow in producing wells. The smooth inner surfaces of coated tubulars often increase the fluid through-put on certain high-rate oil and gas wells by reducing friction and turbulence. The Company’s reputation for supplying quality internal coatings is an important factor in its business, since the failure of coatings can lead to expensive production delays and premature tubular failure. In 2005, NOV created a 60%-owned joint venture in China with the Huabei Petroleum Administration Bureau, which coats Chinese produced drill pipe using NOV’s proprietary coatings.

Tubular Inspection. Newly manufactured pipe sometimes contains serious defects that are not detected at the mill. In addition, pipe can be damaged in transit and during handling prior to use at the well site. As a result, exploration and production companies often have new tubulars inspected before they are placed in service to reduce the risk of tubular failures during drilling, completion, or production of oil and gas wells. Used tubulars are inspected by the Company to detect service-induced flaws after the tubulars are removed from operation. Used drill pipe and used tubing inspection programs allow operators to replace defective lengths, thereby prolonging the life of the remaining pipe and saving the customer the cost of unnecessary tubular replacements and expenses related to tubular failures.

Tubular inspection services employ all major non-destructive inspection techniques, including electromagnetic, ultrasonic, magnetic flux leakage and gamma ray. These inspection services are provided both by mobile units which work at the wellhead as used tubing is removed from a well, and at fixed site tubular inspection locations. The group provides an ultrasonic inspection service for detecting potential fatigue cracks in the end area of used drill pipe, the portion of the pipe that traditionally has been the most difficult to inspect. Tubular inspection facilities also offer a wide range of related services, such as API thread inspection, ring and plug gauging, and a complete line of reclamation services necessary to return tubulars to useful service, including tubular cleaning and straightening, hydrostatic testing and re-threading.

In addition, the Company applies hardbanding material to drillpipe, to enhance its wear characteristics and reduce downhole casing wear as a result of the drilling process. In 2002, the Company introduced its proprietary line of hardbanding material, TCS — 8000ä. The group also cleans, straightens, inspects and coats sucker rods at 11 facilities throughout the Western Hemisphere. Additionally, new sucker rods are inspected before they are placed into service, to avoid premature failure, which can cause the oil well operator to have to pull and replace the sucker rod.

Mill Systems and Sales. The Company engineers and fabricates inspection equipment for steel mills, which it sells and rents. The equipment is used for quality control purposes to detect defects in the pipe during the high-speed manufacturing process. Each piece of mill inspection equipment is designed to customer specifications and is installed and serviced by the Company.

Fiberglass & Composite Tubulars. When compared to conventional carbon steel and even corrosion-resistant alloys, resin-impregnated fiberglass and other modern plastic composites often exhibit superior resistance to corrosion. Some producers manage the corrosive fluids sometimes found in oil and gas fields by utilizing composite or fiberglass tubing, casing and line pipe in the operations of their fields. In 1997, the Company acquired Fiber Glass Systems, a leading provider of high pressure fiberglass tubulars used in oilfield applications, to further serve the tubular corrosion prevention needs of its customers. Fiber Glass Systems has manufactured fiberglass pipe since 1968 under the name “Star^®,” and was the first manufacturer of high-pressure fiberglass pipe to be licensed by the API in 1992. Through acquisitions and investments in technologies, the Company has extended its fiberglass and composite tubing offering into industrial and marine applications, in addition to its oilfield market.

Coiled Tubing. Coiled tubing provides a number of significant functional advantages over the principal alternatives of conventional drill pipe and workover pipe. Coiled tubing allows faster “tripping,” since the coiled tubing can be reeled quickly on and off a drum and in and out of a wellbore. In addition, the small size of the coiled tubing unit compared to an average workover rig or drilling rig reduces preparation time at the well site. Coiled tubing permits a variety of workover and other operations to be performed without having to pull the existing production tubing from the well and allows ease of operation in horizontal or highly deviated wells. Thus, operations using coiled tubing can be performed much more quickly and, in many instances, at a significantly lower cost. Finally, use of coiled tubing generally allows continuous production of the well, eliminating the need to temporarily stop the flow of hydrocarbons. As a result, the economics of a workover are improved because the well can continue to produce hydrocarbons and thus produce revenues while the well treatments are occurring. Continuous production also reduces the risk of formation damage which can occur when the flow of fluids is stopped or isolated. Under normal operating conditions, the Coiled Tubing string must be replaced every three to four months. NOV designs, manufactures, and sells coiled tubing under the Quality Tubing brand name at its mill in Houston, Texas.

Pipeline Inspection. In-service inspection services for oil and gas pipelines identify anomalies in pipelines without removing or dismantling the pipelines or stopping the product flow, giving customers a convenient and cost-effective method of identifying potential defects. The Petroleum Services & Supplies group inspects pipelines by launching a sophisticated survey instrument into the pipeline. Propelled by the product flow, the instrument uses electromagnetics, ultrasonics, and mechanical measurements received on digital and analog media to monitor the severity and location of internal and external pitting-type corrosion as well as other mechanical anomalies in the pipeline, providing a basis for evaluation and repair by the customer. Once the test is complete, the survey instrument is returned to the Company, refurbished and used for future pipeline inspections.

Downhole Tools. NOV designs, manufacturers and services a wide array of downhole motors used in straight hole, directional, slim hole, and coiled tubing drilling applications. These motors are sold or leased under the brand names Trudrill^TM and Vector^TM. This business also maintains a wide variety of motor power sections, which it incorporates into its own motors and also sells to third parties. Downhole drilling motors utilize hydraulic horsepower from the drilling fluid pumped down the drill stem to develop torque at the bit. Motors are capable of achieving higher rotary velocities than can generally be achieved using conventional surface rotary equipment. Motors are often used in conjunction with high speed PDC bits to improve rates of penetration.

The Downhole Tools group also manufactures and sells drilling jars and fishing tools, which are marketed under the Griffith^TM and Bowen^TM brand names. Drilling jars are placed in the drill string, where they can be used to generate a sudden, jarring motion to free the drill string should it become stuck in the wellbore during the drilling process. This jarring motion is generated using hydraulic and/or mechanical force provided at the surface. In the event that a portion of the drill string becomes stuck and cannot be jarred loose, fishing tools are run into the wellbore on the end of the drill string to retrieve the portion that is stuck.

Recently, the Downhole Tools business introduced an electronic jar placement program that determines the optimum jar placement in the drill string as well as the effects of hole angle, hole curvature, and frictional drag on the activation of the drilling jar. This program has proven suitable for straight, directional, and horizontal wellbore analysis, and improves the overall efficiency of the drilling process.

NOV acquired NQL Energy Services, Inc. (“NQL”) in late 2006 for approximately $300 million in cash. NQL manufactures, leases, sells and services downhole tools — including drilling motors, jars, shock tools, reamers, and EM-MWD systems — in 23 locations across seven countries. This transaction will help expand NOV’s downhole tools portfolio and increase exposure to directional drilling services.

Solids Control. The Solids Control product line uses a variety of technologies to separate drill cuttings from drilling fluids, and to transport, dry and refine drill cuttings for safe disposal under the Brandt NOV brand name. The Company believes the regulatory and industry trends toward minimizing the environmental impact of drilling operations in a number of environmentally sensitive oil and gas producing regions will lead to greater demand for solids control products and waste management services. Waste management services cover many areas associated with the drilling of a well included solids removal, solids transport, solids treatment and solids disposal. The Company further believes the trend towards more technically complex drilling, including highly deviated directional wells and slim-hole completions, will favorably impact the demand for solid controls technology because of its ability to reduce costly downhole problems. As environmental constraints are increased and as awareness of environmental protection grows, the Company believes that its drill cuttings separation, cuttings transport and treating processes will experience increased demand.

The Company has a history of introducing new solids control products and services obtained both through its internal development and through acquiring or licensing technologies from others. Current product offerings are circular, elliptical and linear motion shale shakers and shale shaker screens that comply with the November 2004 API Recommended Practice 13C, degassers, desanders, desilters, high speed/high capacity centrifuges and conventional centrifuges, thermal desorption units, cuttings conveyance systems and closed loop drilling fluids systems at its facilities in Conroe, Texas; Houston, Texas; Aberdeen, Scotland; Leduc, Alberta; and Trinidad.

Through development of new product offerings and strategic acquisitions the Company has become a leading provider of thermal desorption cuttings processing services to the drilling industry. Similar efforts have been successful in developing a broad range of services, including centrifugal dryers, and the Brandt NOV FreeFlow system.

Instrumentation. The Company’s Instrumentation business provides drilling rig operators real time measurement and monitoring of critical parameters required to improve rig safety and efficiency. In 1999, the Company introduced its RigSense^™ product, which combines leading hardware and software technologies into an integrated drilling rig package. This product permits access of drilling data from offsite locations, enabling company personnel to monitor drilling operations from an office environment, through a secure link. Systems are both sold and rented, and are typically comprised of several sensors placed throughout the rig to measure critical drilling parameters such as weight on bit, hookload, standpipe pressure, mud pump strokes, drilling mud levels, torque, and others, all networked back to a central command station for review, recording and interpretation. The rig instrumentation packages typically provide multiple screens and hazardous area touch-screen displays around the rig for various rig personnel to perform individual jobs more effectively, and cameras for certain areas to promote safety and permit remote monitoring. The Company has evolved from data collection to a leading drilling information provider by using state-of-the-art satellite communications to reduce the gap from rigs to corporate office. The reports on drilling activities and process are now provided from the rig site information as a part of the business solution, DrillSuite^™, to assist the contractor in managing their business of drilling. DrillSuite^™ allows contractors to streamline administration by eliminating manual entry of data, promotes accurate payroll processing and invoicing, and includes asset tracking and maintenance programs. The real time information provided also allows the Company to advance the drilling process using advanced drilling algorithms and applying electronic controls such as to our Wildcat Auto Drilling System for better well planning, enhanced rates of penetration, reduced program costs, and improved wellbore quality.

Pumps & Expendables. The Company’s Pumps & Expendables business designs, manufactures, and sells pumps that are used in oil and gas drilling operations and production applications. These pumps include reciprocating, centrifugal, and progressive cavity pumps. (High pressure mud pumps are sold within the Rig Technology segment.) These pumps are sold as individual units and unitized packages with drivers, controls and piping. This group also manufactures fluid end expendables (liners, valves, pistons, and plungers) fluid end modules, and a complete line of dies and inserts for pipe handling. The group offers popular industry brand names like Wheatley, Gaso, and Omega reciprocating pumps, acquired in September of 2000; Halco Centrifugal Pumps, acquired in January of 2002; Petroleum Expendable Products (PEP), acquired in May of 1997; and Phoenix Energy Products, acquired in 1998.

The group, through its Mono/Monoflo business, is also a worldwide leader in the design and manufacture of a wide range of progressive cavity pumps, grinders and screens used in various industrial applications. Mono/Monoflo also manufactures a broad range of oilfield products which include fluid transfer, artificial lift and power sections.

The group manufactures its pump products in Houston, Odessa and Marble Falls, Texas; Tulsa and McAlester, Oklahoma; Scott, Louisiana; Manchester, England; and Melbourne, Australia.

Customers and Competition. Customers for the Petroleum Services & Supplies’ tubular services include major and independent oil and gas companies, national oil companies, drilling and workover contractors, oilfield equipment and product distributors and manufacturers, oilfield service companies, pipeline operators, steel mills, and other industrial companies. The Company’s competitors include, among others, Ameron International Corp, EDO Corporation, Pipeline Integrity International Ltd. (a division of General Electric), ShawCor Ltd., Smith International, Inc., Frank’s International, Inc., H. Rosen Engineering, GmbH; T.D. Williamson, Inc.; Baker Hughes Incorporated; Diascan; Magpie; Weatherford International Ltd.; Patterson Tubular Services; and Precision Tube (a division of Maverick Tube). In addition, the group competes with a number of smaller regional competitors in tubular inspection. Certain foreign jurisdictions and government-owned petroleum companies located in some of the countries in which this group operates have adopted policies or regulations which may give local nationals in these countries certain competitive advantages. Within the Company’s corrosion control products, certain substitutes such as non-metallic tubulars, inhibitors, corrosion resistant alloys, cathodic protection systems, and non-metallic liner systems also compete with the Company’s products. Management believes that the principal competitive factors affecting this business are performance, quality, reputation, customer service, availability of products, spare parts, and consumables, and breadth of product line and price.

The primary customers for drilling services offered by the Petroleum Services & Supplies group include drilling contractors, well servicing companies, major and independent oil and gas companies, and national oil companies. Competitors in drilling services include Smith International (“SWACO”); Derrick Manufacturing Corp.; Fluid Systems; Oil Tools Pte. Ltd; Peak Energy Services, Ltd.; Petron Industries, Inc.; Epoch (a division of Nabors Industries); Pason Systems, Inc.; Robbins & Myers; Kem-tron, Inc.; Double Life Corporation, Inc.; Oteco, Inc.; Southwest Oilfield Products; Forum Oilfield Technologies; P-Quip Oilfield Products; and a number of regional competitors. The Petroleum Services & Supplies group sells drilling services into highly competitive markets. Management believes that on-site service is becoming an increasingly important competitive element in this market, and that the principal competitive factors affecting the business are performance, quality, reputation, customer service, product availability and technology, breadth of product line and price.

Distribution Services

Through its network of over 180 locations worldwide, the Distribution Services group provides supply chain management services to drilling contractors and operators around the world. This group stocks and sells consumables maintenance, repair and operating supply (“MRO”) and spare parts that are needed throughout the drilling, completion and production process. The supplies and equipment stocked by our distribution service centers vary by location. Each distribution point generally offers a large line of oilfield products including valves, fittings, flanges, spare parts for oilfield equipment and miscellaneous expendable items.

NOV’s e-Distribution solutions leverage the flexible infrastructure of SAP™ to extend the customer’s investment in systems and address the total cost of ownership by streamlining the acquisition process from procurement to payment, by digitally managing approval routing and workflow, and by providing robust reporting functionality.

Approximately 84% of the Distribution Services group’s sales in 2006 were in the United States and Canada. The remainder comes from key international markets in Mexico, the North Sea, Middle East, South America and the Far East.

Strategically the group continued to expand its alliances with oil and gas companies and certain drilling contractors to increase its revenues in 2006. Additionally the group seeks to leverage its extensive purchasing power to reduce the costs of the goods it purchases. In 2006, the group built on the new vendor relationships it established with Chinese suppliers in 2005.

Customers and Competition. The primary customers for Distribution Services include drilling contractors, well servicing companies, major and independent oil and gas companies, and national oil companies. Competitors in Distribution Services include Wilson Supply (a division of Smith International), CE Franklin, Redman Pipe and Supply, and a number of regional competitors.

2006 Acquisitions and Other Investments

In 2006, the Company made the following acquisitions and outside investments:

				Operating		Date of
Acquisition		Form		Segment		Transactions
Retsco Oilfield Field Equipment, Ltd.		Asset		Petroleum Services & Supply		February 2006
Soil Recovery A/S		Stock		Petroleum Services & Supply		March 2006
D.M.I. est SARL		Asset		Petroleum Services & Supply		April 2006
Core Motion, Inc.		License		Rig Technology		August 2006
In-Situ Oilfield Services Limited		Asset		Petroleum Services & Supply		September 2006
Longhorn Machine, L.P.		Asset		Rig Technology		September 2006
Rolligon, Ltd.		Asset		Rig Technology		November 2006
FITIRI, Inc.		Asset		Petroleum Services & Supply		November 2006
Toolbox Drilling Solutions Limited		Stock		Petroleum Services & Supply		December 2006
NQL Energy Services Inc.		Stock		Petroleum Services & Supply		December 2006

The Company paid an aggregate purchase price of $339.5 million ($329.7 million in net cash and $9.8 million of notes payable) for acquisitions and outside investments in 2006.

Seasonal Nature of the Company’s Business

Historically, the level of some of the Company’s businesses has followed seasonal trends to some degree. In general the Rig Technology group has not experienced significant seasonal fluctuation although orders for new equipment may be modestly affected by holiday schedules. There can be no guarantee that seasonal effects will not influence future sales in this segment.

In Canada, the Petroleum Services & Supplies segment has typically realized high first quarter activity levels, as operators take advantage of the winter freeze to gain access to remote drilling and production areas. In past years, certain Canadian businesses within Petroleum Services & Supplies and Distribution Services have declined during the second quarter due to warming weather conditions which resulted in thawing, softer ground, difficulty accessing drill sites, and road bans that curtailed drilling activity (“Canadian Breakup”). However, these businesses have typically rebounded in the third and fourth quarter. Petroleum Services & Supplies activity in both the U.S. and Canada sometimes increases during the third quarter and then peaks in the fourth quarter as operators spend the remaining drilling and/or production capital budgets for that year. Petroleum Services & Supplies revenues in the Rocky Mountain region sometimes decline in the late fourth quarter or early first quarter due to harsh winter weather.

Within Petroleum Services & Supplies, the Pipeline Inspection business has typically experienced reduced activity during the first quarter of the calendar year. The high winter demand for gas and petroleum products in the northern hemisphere and the consequent curtailment of pipeline maintenance and inspection programs often results in less opportunity to perform pipeline inspection during this time. The segment’s fiberglass and composite tubulars business in China has typically declined in the first quarter due to the impact of weather on manufacturing and installation operations, and due to business slow downs associated with the Chinese New Year.

The Company anticipates that the seasonal trends described above will continue. However, there can be no guarantee that spending by the Company’s customers will continue to follow patterns seen in the past or that spending by other customers will remain the same as in prior years.

Marketing & Distribution Network

Substantially all of our Rig Technology capital equipment and spare parts sales, and a large portion of our smaller pumps and parts sales, are made through our direct sales force and distribution service centers. Sales to foreign state-owned oil companies are typically made in conjunction with agent or representative arrangements. Products within our Petroleum Service & Supplies segment are rented and sold worldwide through our own sales force and through commissioned representatives. Distribution Services sales are made through our network of distribution service centers. Customers for our products and services include drilling and other service contractors, exploration and production companies, supply companies and nationally owned or controlled drilling and production companies.

The Rig Technology segment’s customers include drilling contractors, shipyards and other rig fabricators, well servicing companies, pressure pumpers, national oil companies, major and independent oil and gas companies, supply stores, and pipe-running service providers. Demand for its products is strongly dependent upon capital spending plans by oil and gas companies and drilling contractors, and the level of oil and gas well drilling activity. Rig Technology purchases can represent significant capital expenditures, and are often sold as part of a rig fabrication or major rig refurbishment package. Sometimes these packages cover multiple rigs, and often the Company bids jointly with other related product and services providers, such as rig fabrication yards and rig design firms.

The Petroleum Services & Supplies group’s customers for tubular services include major and independent oil and gas companies, national oil companies, oilfield equipment and product distributors and manufacturers, drilling and workover contractors, oilfield service companies, pressure pumpers, pipeline operators, pipe mills, manufactures and processors, and other industrial companies. Certain tubular inspection and tubular coating products and services often are incorporated as a part of a tubular package sold by tubular supply stores to end users. The Company primarily has direct operations in the international marketplace, but operates through agents in certain markets.

The Petroleum Services & Supplies group’s customers for drilling services are predominantly major and independent oil and gas companies, national oil companies, drilling contractors, well servicing companies, providers of drilling fluids, and other oilfield service companies. This group operates sales and distribution facilities at strategic locations worldwide to service areas with high drilling activity. Strategically located service and engineering facilities provide specialty repair and maintenance services to customers. Sales of capital equipment are sometimes made through rig fabricators, and often are bid as part of a rig fabrication package or rig refurbishment package. Sometimes these packages cover multiple rigs, and often the Company bids jointly with other related service providers.

Distribution Services sales are made through our network of distribution service centers. Customers for our products and services include drilling and other service contractors, exploration and production companies, supply companies and nationally owned or controlled drilling and production companies.

The Company’s foreign operations, which include significant operations in Canada, Europe, the Far East, the Middle East, Africa and Latin America, are subject to the risks normally associated with conducting business in foreign countries, including foreign currency exchange risks and uncertain political and economic environments, which may limit or disrupt markets, restrict the movement of funds or result in the deprivation of contract rights or the taking of property without fair compensation. Government-owned petroleum companies located in some of the countries in which the Company operates have adopted policies (or are subject to governmental policies) giving preference to the purchase of goods and services from companies that are majority-owned by local nationals. As a result of such policies, the Company relies on joint ventures, license arrangements and other business combinations with local nationals in these countries. In addition, political considerations may disrupt the commercial relationship between the Company and such government-owned petroleum companies. Although the Company has not experienced any significant problems in foreign countries arising from nationalistic policies, political instability, economic instability or currency restrictions, there can be no assurance that such a problem will not arise in the future. See Note 15 of the Notes to the Consolidated Financial Statements for information regarding geographic revenue information.

Research and New Product Development and Intellectual Property

The Company believes that it has been a leader in the development of new technology and equipment to enhance the safety and productivity of drilling and well servicing processes and that its sales and earnings have been dependent, in part, upon the successful introduction of new or improved products. Through its internal development programs and certain acquisitions, the Company has assembled an extensive array of technologies protected by a substantial number of trade and service marks, patents, trade secrets, and other proprietary rights.

As of December 31, 2006, the Company held a substantial number of United States patents and had several patent applications pending. Expiration dates of such patents range from 2007 to 2026. As of this date, the Company also had foreign patents and patent applications pending relating to inventions covered by the United States patents. Additionally, the Company maintains a substantial number of trade and service marks and maintains a number of trade secrets.

Although the Company believes that this intellectual property has value, competitive products with different designs have been successfully developed and marketed by others. The Company considers the quality and timely delivery of its products, the service it provides to its customers and the technical knowledge and skills of its personnel to be more important than its intellectual property in its ability to compete. While the Company stresses the importance of its research and development programs, the technical challenges and market uncertainties associated with the development and successful introduction of new products are such that there can be no assurance that the Company will realize future revenues from new products.

Engineering and Manufacturing

The manufacturing processes for the Company’s products generally consist of machining, welding and fabrication, heat treating, assembly of manufactured and purchased components and testing. Most equipment is manufactured primarily from alloy steel, and the availability and price of alloy steel castings, forgings, purchased components and bar stock is critical to the production and timing of shipments. Primary manufacturing facilities for the Rig Technology segment are located in Houston, Galena Park, Sugar Land, Conroe, Anderson, Fort Worth and Pampa, Texas; Duncan and Tulsa, Oklahoma; Orange, California; Calgary, Nisku and Edmonton, Canada; Mexicali, Mexico; Aberdeen, Scotland; Kristiansand, and Stavanger, Norway; Etten-Leur, the Netherlands; Carquefou, France; Singapore; Perth, Australia; Lanzhou and Shanghai, China; and Jebal Ali, UAE.

The Company’s Petroleum Services & Supplies segment manufactures or assembles the equipment and products which it rents and sells to customers, and which it uses in providing services. Downhole tools are manufactured at facilities in Houston, Texas; Nisku and Edmonton, Alberta. Solids control equipment and screens are manufactured at facilities in Houston and Conroe, Texas; New Iberia, Louisiana; Aberdeen, Scotland; Nisku and Alberta, Canada; Trinidad; and Macae, Brazil. Instrumentation equipment is manufactured at Cedar Park and Houston, Texas facilities. Pumps are manufactured at facilities in Houston, Odessa and Marble Falls, Texas; McAlester and Tulsa, Oklahoma; Manchester, England; and Melbourne, Australia.

The group manufactures tubular inspection equipment and instrumented pipeline inspection tools at its Houston, Texas facility for resale, and renovates and repairs equipment at its manufacturing facilities in Houston, Texas; Celle, Germany; Nisku and Alberta, Canada; and Aberdeen, Scotland. Fiberglass and composite tubulars and fittings are manufactured at facilities in San Antonio and Big Spring, Texas; Little Rock, Arkansas; Tulsa, Oklahoma; Wichita, Kansas; and Harbin and Suzhou, China facilities, while tubular coatings are manufactured in its Houston, Texas facility, or through restricted sale agreements with third party manufacturers.

Certain of the Company’s manufacturing facilities and certain of the Company’s products have various certifications, including, ISO 9001, API and ASME.

Raw Materials

The Company believes that materials and components used in its servicing and manufacturing operations and purchased for sales are generally available from multiple sources. The prices paid by the Company for its raw materials may be affected by, among other things, energy, steel and other commodity prices; tariffs and duties on imported materials; and foreign currency exchange rates. The Company experienced higher steel prices and greater difficulty securing necessary steel supplies in 2004 and 2005 than it experienced during the preceding several years. In 2006, the price for mild steel and standard grades stabilized while specialty alloy prices continued to rise driven primarily by escalation in the price of the alloying agents. The Company has generally been successful in its effort to mitigate the financial impact of higher raw materials costs on its operations by applying surcharges to and adjusting prices on the products it sells. Furthermore, NOV continued to expand its supply base in 2006 throughout the world to address our customers’ needs. However, higher prices and lower availability of steel and other raw material the Company uses in its business may adversely impact future periods.

Backlog

The Company monitors its backlog of orders within its Rig Technology group to guide its planning. Backlog includes orders greater than $250 thousand for most items and orders for wireline units in excess of $75 thousand, and which require more than three months to manufacture and deliver.

Backlog measurements are made on the basis of written orders which are firm, but may be cancelable by the customer. Most require reimbursement to the Company for costs incurred in such an event. There can be no assurance that the backlog amounts will ultimately be realized as revenue, or that the Company will earn a profit on backlog work. Our backlog for equipment at recent year-ends has been:

December 31, 2006		$6.0 billion
December 31, 2005		2.3 billion
December 31, 2004		0.6 billion *

Employees

At December 31, 2006, the Company had a total of 26,861 employees, of which 3,885 were temporary employees. Approximately 117 employees in the Company’s fiberglass tubulars plant in Little Rock, Arkansas, and 100 employees of the

Company’s downhole tools product line, are subject to collective bargaining agreements. Additionally, certain of the Company’s employees in certain foreign locations are subject to collective bargaining agreements.

ITEM 1A. RISK FACTORS

You should carefully consider the risks described below, in addition to other information contained or incorporated by reference herein. Realization of any of the following risks could have a material adverse effect on our business, financial condition, cash flows and results of operations.

We are dependent upon the level of activity in the oil and gas industry, which is volatile.

The oil and gas industry historically has experienced significant volatility. Demand for our services and products depends primarily upon the number of oil rigs in operation, the number of oil and gas wells being drilled, the depth and drilling conditions of these wells, the volume of production, the number of well completions, capital expenditures of other oilfield service companies and the level of workover activity. Drilling and workover activity can fluctuate significantly in a short period of time, particularly in the United States and Canada. The willingness of oil and gas operators to make capital expenditures to explore for and produce oil and natural gas and the willingness of oilfield service companies to invest in capital equipment will continue to be influenced by numerous factors over which we have no control, including:

	•		the ability of the members of the Organization of Petroleum Exporting Countries, or OPEC, to maintain price stability through voluntary production limits, the level of production by non-OPEC countries and worldwide demand for oil and gas;
	•		level of production from known reserves;
	•		cost of exploring for and producing oil and gas;
	•		level of drilling activity and drilling rig dayrates;
	•		worldwide economic activity;
	•		national government political requirements;
	•		development of alternate energy sources; and
	•		environmental regulations.

If there is a significant reduction in demand for drilling services, in cash flows of drilling contractors, well servicing companies, or production companies or in drilling or well servicing rig utilization rates, then demand for the products and services of the Company will decline.

Volatile oil and gas prices affect demand for our products.

Oil and gas prices have been volatile since 1990. In general, oil prices approximated $18-22 per barrel from 1991 through 1997, experienced a decline into the low teens in 1998 and 1999, and have generally ranged between $25-75 per barrel since 2000. Spot gas prices generally ranged between $1.80-2.60 per mmbtu of gas from 1991 through 1999, then experienced severe spikes into the $10 range in 2001 and 2003. Absent occasional spikes and dips due to imbalances in supply and demand, prices have generally ranged between $5.00-10.00 per mmbtu during the last two years.

Expectations for future oil and gas prices cause many shifts in the strategies and expenditure levels of oil and gas companies and drilling contractors, particularly with respect to decisions to purchase major capital equipment of the type we manufacture. Oil and gas prices, which are determined by the marketplace, may fall below a range that is acceptable to our customers, which could reduce demand for our products.

Competition in our industry could ultimately lead to lower revenues and earnings.

The oilfield products and services industry is highly competitive. We compete with national, regional and foreign competitors in each of our current major product lines. These competitors may have greater financial, technical, manufacturing and marketing resources than us, and may be in a better competitive position. The following competitive actions can each affect our revenues and earnings:

	•		price changes;
	•		new product and technology introductions; and
	•		improvements in availability and delivery.

In addition, certain foreign jurisdictions and government-owned petroleum companies located in some of the countries in which we operate have adopted policies or regulations which may give local nationals in these countries competitive advantages. Competition in our industry could lead to lower revenues and earnings.

We have aggressively expanded our businesses and intend to maintain an aggressive growth strategy.

We have aggressively expanded and grown our businesses during the past several years, through acquisitions and investment in internal growth. We anticipate that we will continue to pursue an aggressive growth strategy but we cannot assure you that attractive acquisitions will be available to us at reasonable prices or at all. In addition, we cannot assure you that we will successfully integrate the operations and assets of any acquired business with our own or that our management will be able to manage effectively the increased size of the Company or operate any new lines of business. Any inability on the part of management to integrate and manage acquired businesses and their assumed liabilities could adversely affect our business and financial performance. In addition, we may need to incur substantial indebtedness to finance future acquisitions. We cannot assure you that we will be able to obtain this financing on terms acceptable to us or at all. Future acquisitions may result in increased depreciation and amortization expense, increased interest expense, increased financial leverage or decreased operating income for the Company, any of which could cause our business to suffer.

Our operating results have fluctuated during recent years and these fluctuations may continue.

We have experienced fluctuations in quarterly operating results in the past. We cannot assure you that we will realize expected earnings growth or that earnings in any particular quarter will not fall short of either a prior fiscal quarter or investors’ expectations. The following factors, in addition to others not listed, may affect our quarterly operating results in the future:

	•		fluctuations in the oil and gas industry;
	•		competition;
	•		the ability to service the debt obligations of the Company;
	•		the ability to identify strategic acquisitions at reasonable prices;
	•		the ability to manage and control operating costs of the Company;
	•		fluctuations in political and economic conditions in the United States and abroad; and
	•		the ability to protect our intellectual property rights.

There are risks associated with our presence in international markets, including political or economic instability and currency restrictions.

Approximately 55% of our revenues in 2006 were derived from operations outside the United States (based on revenue destination). Our foreign operations include significant operations in Canada, Europe, the Middle East, Africa, Southeast Asia, South America and other international markets. Our revenues and operations are subject to the risks normally associated with conducting business in foreign countries, including uncertain political and economic environments, which may limit or disrupt markets, restrict the movement of funds or result in the deprivation of contract rights or the taking of property without fair compensation. Government-owned petroleum companies located in some of the countries in which we operate have adopted policies, or are subject to governmental policies, giving preference to the purchase of goods and services from companies that are majority-owned by local nationals. As a result of these policies, we may rely on joint ventures, license arrangements and other business combinations with local nationals in these countries. In addition, political considerations may disrupt the commercial relationships between us and government-owned petroleum companies.

Under broad powers granted to the President of Venezuela by the National Assembly on January 31, 2007, the Venezuelan government began asserting closer government control over its oil and gas reserves. The Company generated revenue of $57.9 million from its Venezuelan operations in 2006, and as of December 31, 2006 had a net equity investment in Venezuela of $45.3 million. These political events could adversely affect our operations in Venezuela (where we have operated for nearly 40 years) and financial results in the future.

The results of our operations are subject to market risk from changes in foreign currency exchange rates.

We earn revenues, pay expenses and incur liabilities in countries using currencies other that the U.S. dollar, including the Canadian dollar, the Euro, the British Pound and the Norwegian Kroner. Approximately 55% of our 2006 revenue was derived from sales outside the United States. Because our consolidated financial statements are presented in U.S. dollars, we must translate revenues, income and expenses into U.S. dollars at exchange rates in effect during or at the end of each reporting period. Thus, increases or decreases in the value of the U.S. dollar against other currencies in which our operations are conducted will affect our revenues and operating income. Because of the geographic diversity of our operations, weaknesses in some currencies might be offset by strengths in others over time. We also use derivative financial instruments to further reduce our net exposure

to currency exchange fluctuations. We had forward contracts with a notional amount of $1,477.2 million (with a fair value of $26.3 million) as of December 31, 2006 to reduce the impact of foreign currency exchange rate movements. We are also subject to risks that the counterparties to these contracts fail to meet the terms of our foreign currency contracts. We cannot assure you that fluctuations in foreign currency exchange rates would not affect our financial results.

An impairment of goodwill could reduce our earnings.

We recorded approximately $2.2 billion of goodwill on the consolidated balance sheet as of December 31, 2006. Goodwill is recorded when the purchase price of a business exceeds the fair market value of the tangible and separately measurable intangible net assets. Generally accepted accounting principles requires us to test goodwill for impairment on an annual basis or when events or circumstances occur indicating that goodwill might be impaired. If we were to determine that any of our remaining balance of goodwill was impaired, we would record an immediate charge to earnings with a corresponding reduction in stockholders’ equity and increase in balance sheet leverage as measured by debt to total capitalization.

We could be adversely affected if we fail to comply with any of the numerous federal, state and local laws, regulations and policies that govern environmental protection, zoning and other matters applicable to our businesses.

Our businesses are subject to numerous federal, state and local laws, regulations and policies governing environmental protection, zoning and other matters. These laws and regulations have changed frequently in the past and it is reasonable to expect additional changes in the future. If existing regulatory requirements change, we may be required to make significant unanticipated capital and operating expenditures. We cannot assure you that our operations will continue to comply with future laws and regulations. Governmental authorities may seek to impose fines and penalties on us or to revoke or deny the issuance or renewal of operating permits for failure to comply with applicable laws and regulations. Under these circumstances, we might be required to reduce or cease operations or conduct site remediation or other corrective action which could adversely impact our operations and financial condition.

Our businesses expose us to potential environmental liability.

Our businesses expose us to the risk that harmful substances may escape into the environment, which could result in:

	•		personal injury or loss of life;
	•		severe damage to or destruction of property; or
	•		environmental damage and suspension of operations.

Our current and past activities, as well as the activities of our former divisions and subsidiaries, could result in our facing substantial environmental, regulatory and other liabilities. These could include the costs of cleanup of contaminated sites and site closure obligations. These liabilities could also be imposed on the basis of one or more of the following theories:

	•		negligence;
	•		strict liability;
	•		breach of contract with customers; or
	•		as a result of our contractual agreement to indemnify our customers in the normal course of business, which is normally the case.

We may not have adequate insurance for potential environmental liabilities.

While we maintain liability insurance, this insurance is subject to coverage limits. In addition, certain policies do not provide coverage for damages resulting from environmental contamination. We face the following risks with respect to our insurance coverage:

	•		we may not be able to continue to obtain insurance on commercially reasonable terms;
	•		we may be faced with types of liabilities that will not be covered by our insurance;
	•		our insurance carriers may not be able to meet their obligations under the policies; or
	•		the dollar amount of any liabilities may exceed our policy limits.

Even a partially uninsured claim, if successful and of significant size, could have a material adverse effect on our consolidated financial statements.

There are risks associated with certain contracts for our drilling equipment.

As of December 31, 2006, we had a backlog of approximately $6 billion of drilling equipment to be manufactured, assembled, tested and delivered by our Rig Technology Group. The following factors, in addition to others not listed, could reduce our margins on these contracts, adversely affect our position in the market and subject us to contractual penalties:

	•		our failure to adequately estimate costs for making this drilling equipment;
	•		our inability to deliver equipment that meets contracted technical requirements;
	•		our inability to maintain our quality standards during the design and manufacturing process;
	•		our inability to secure parts made by third party vendors at reasonable costs and within required timeframes;
	•		unexpected increases in the costs of raw materials; and
	•		our inability to manage unexpected delays due to weather, shipyard access, labor shortages or other factors beyond our control.

Such developments could have a material adverse effect on our consolidated financial statements.

GLOSSARY OF OILFIELD TERMS

		(Sources: Company management; “A Dictionary for the Petroleum Industry,” The University of Texas at Austin, 2001.)
API		Abbr: American Petroleum Institute
Annular Blowout Preventer		A large valve, usually installed above the ram blowout preventers, that forms a seal in the annular space between the pipe and the wellbore or, if no pipe is present, in the wellbore itself.
Annulus   Automatic Pipe Handling Systems (Automatic Pipe Racker)		The open space around pipe in a wellbore through which fluids may pass. A device used on a drilling rig to automatically remove and insert drill stem components from and into the hole. It replaces the need for a person to be in the derrick or mast when tripping pipe into or out of the hole.
Automatic Roughneck		A large, self-contained pipe-handling machine used by drilling crew members to make up and break out tubulars. The device combines a spinning wrench, torque wrench, and backup wrenches.
Beam pump		Surface pump that raises and lowers sucker rods continually, so as to operate a downhole pump.
Bit		The cutting or boring element used in drilling oil and gas wells. The bit consists of a cutting element and a circulating element. The cutting element is steel teeth, tungsten carbide buttons, industrial diamonds, or polycrystalline diamonds (PDCs). These teeth, buttons, or diamonds penetrate and gouge or scrape the formation to remove it. The circulating element permits the passage of drilling fluid and utilizes the hydraulic force of the fluid stream to improve drilling rates. In rotary drilling, several drill collars are joined to the bottom end of the drill pipe column, and the bit is attached to the end of the drill collars. Drill collars provide weight on the bit to keep it in firm contact with the bottom of the hole. Most bits used in rotary drilling are roller cone bits, but diamond bits are also used extensively.
Blowout		An uncontrolled flow of gas, oil or other well fluids into the atmosphere. A blowout, or gusher, occurs when formation pressure exceeds the pressure applied to it by the column of drilling fluid. A kick warns of an impending blowout.
Blowout Preventer (BOP)		Series of valves installed at the wellhead while drilling to prevent the escape of pressurized fluids.
Blowout Preventer (BOP) Stack		The assembly of well-control equipment including preventers, spools, valves, and nipples connected to the top of the wellhead.
Closed Loop Drilling Systems		A solids control system in which the drilling mud is reconditioned and recycled through the drilling process on the rig itself.
Coiled Tubing		A continuous string of flexible steel tubing, often hundreds or thousands of feet long, that is wound onto a real, often dozens of feet in diameter. The reel is an integral part of the coiled tubing unit, which consists of several devices that ensure the tubing can be safely and efficiently inserted into the well from the surface. Because tubing can be lowered into a well without having to make up joints of tubing, running coiled tubing into the well is faster and less expensive than running conventional tubing. Rapid advances in the use of coiled tubing make it a popular way in which to run tubing into and out of a well. Also called reeled tubing.
Cuttings		Fragments of rock dislodged by the bit and brought to the surface in the drilling mud. Washed and dried cutting samples are analyzed by geologist to obtain information about the formations drilled.

Directional Well		Well drilled in an orientation other than vertical in order to access broader portions of the formation.
Drawworks		The hoisting mechanism on a drilling rig. It is essentially a large winch that spools off or takes in the drilling line and thus raises or lowers the drill stem and bit.
Drill Pipe Elevator (Elevator)		On conventional rotary rigs and top-drive rigs, hinged steel devices with manual operating handles that crew members latch onto a tool joint (or a sub). Since the elevators are directly connected to the traveling block, or to the integrated traveling block in the top drive, when the driller raises or lowers the block or the top-drive unit, the drill pipe is also raised or lowered.
Drilling jars		A percussion tool operated manually or hydraulically to deliver a heavy downward blow to free a stuck drill stem.
Drilling mud		A specially compounded liquid circulated through the wellbore during rotary drilling operations.
Drilling riser		A conduit used in offshore drilling through which the drill bit and other tools are passed from the rig on the water’s surface to the sea floor.
Drill stem		All members in the assembly used for rotary drilling from the swivel to the bit, including the Kelly, the drill pipe and tool joints, the drill collars, the stabilizers, and various specialty items.
Formation		A bed or deposit composed throughout of substantially the same kind of rock; often a lithologic unit. Each formation is given a name, frequently as a result of the study of the formation outcrop at the surface and sometimes based on fossils found in the formation.
Hardbanding		A special wear-resistant material often applied to tool joints to prevent abrasive wear to the area when the pipe is being rotated downhole.
Iron roughneck		A floor-mounted combination of a spinning wrench and a torque wrench. The Iron Roughneck moves into position hydraulically and eliminates the manual handling involved with suspended individual tools.
Jack-up rig		A mobile bottom-supported offshore drilling structure with columnar or open-truss legs that support the deck and hull. When positioned over the drilling site, the bottoms of the legs penetrate the seafloor.
Jar		A mechanical device placed near the top of the drill stem which allows the driller to strike a very heavy blow upward or downward on stuck pipe.
Joint		1) In drilling, a single length (from 16 feet to 45 feet, or 5 meters to 14.5 meters, depending on its range length) of drill pipe, drill collar, casing or tubing that has threaded connections at both ends. Several joints screwed together constitute a stand of pipe. 2) In pipelining, a single length (usually 40 feet-12 meters) of pipe. 3) In sucker rod pumping, a single length of sucker rod that has threaded connections at both ends.
Kelly		The heavy steel tubular device, four- or six-sided, suspended from the swivel through the rotary table and connected to the top joint of drill pipe to turn the drill stem as the rotary table returns. It has a bored passageway that permits fluid to be circulated into the drill stem and up the annulus, or vice versa. Kellys manufactured to API specifications are available only in four- or six-sided versions, are either 40 or 54 feet (12 to 16 meters) long, and have diameters as small as 2 1/2 inches (6 centimeters) and as large as 6 inches (15 centimeters).
Kelly bushing		A special device placed around the kelly that mates with the kelly flats and fits into the master bushing of the rotary table. The kelly bushing is designed so that the kelly is free to move up or down through it. The bottom of the bushing may be shaped to fit the opening in

		the master bushing or it may have pins that fit into the master bushing. In either case, when the kelly bushing is inserted into the master bushing and the master bushing is turned, the kelly bushing also turns. Since the kelly bushing fits onto the kelly, the kelly turns, and since the kelly is made up to the drill stem, the drill stem turns. Also called the drive bushing.
Kelly spinner		A pneumatically operated device mounted on top of the kelly that, when actuated, causes the kelly to turn or spin. It is useful when the kelly or a joint of pipe attached to it must be spun up, that is, rotated rapidly for being made up.
Kick		An entry of water, gas, oil, or other formation fluid into the wellbore during drilling. It occurs because the pressure exerted by the column of drilling fluid is not great enough to overcome the pressure exerted by the fluids in the formation drilled. If prompt action is not taken to control the kick, or kill the well, a blowout may occur.
Making-up		1. To assemble and join parts to form a complete unit (e.g., to make up a string of drill pipe). 2. To screw together two threaded pieces. Compare break out. 3. To mix or prepare (e.g., to make up a tank of mud). 4. To compensate for (e.g., to make up for lost time).
Manual tongs (Tongs)		The large wrenches used for turning when making up or breaking out drill pipe, casing, tubing, or other pipe; variously called casing tongs, pipe tongs, and so forth, according to the specific use. Power tongs or power wrenches are pneumatically or hydraulically operated tools that serve to spin the pipe up tight and, in some instances to apply the final makeup torque.
Master bushing		A device that fits into the rotary table to accommodate the slips and drive the kelly bushing so that the rotating motion of the rotary table can be transmitted to the kelly. Also called rotary bushing.
Motion compensation equipment		Any device (such as a bumper sub or heave compensator) that serves to maintain constant weight on the bit in spite of vertical motion of a floating offshore drilling rig.
Mud pump		A large, high-pressure reciprocating pump used to circulate the mud on a drilling rig.
Plug gauging		The mechanical process of ensuring that the inside threads on a piece of drill pipe comply with API standards.
Pressure control equipment		1. The act of preventing the entry of formation fluids into a wellbore. 2. The act of controlling high pressures encountered in a well.
Pressure pumping		Pumping fluids into a well by applying pressure at the surface.
Ram blowout preventer		A blowout preventer that uses rams to seal off pressure on a hole that is with or without pipe. Also called a ram preventer.
Ring gauging		The mechanical process of ensuring that the outside threads on a piece of drill pipe comply with API standards.
Riser		A pipe through which liquids travel upward.
Riser pipe		The pipe and special fitting used on floating offshore drilling rigs to established a seal between the top of the wellbore, which is on the ocean floor, and the drilling equipment located above the surface of the water. A riser pipe serves as a guide for the drill stem from the drilling vessel to the wellhead and as a conductor or drilling fluid from the well to the vessel. The riser consists of several sections of pipe and includes special devices to compensate for any movement of the drilling rig caused by waves. Also called marine riser pipe, riser joint.

Rotary table		The principal piece of equipment in the rotary table assembly; a turning device used to impart rotational power to the drill stem while permitting vertical movement of the pipe for rotary drilling. The master bushing fits inside the opening of the rotary table; it turns the kelly bushing, which permits vertical movement of the kelly while the stem is turning.
Rotating blowout preventer (Rotating Head)		A sealing device used to close off the annular space around the kelly in drilling with pressure at the surface, usually installed above the main blowout preventers. A rotating head makes it possible to drill ahead even when there is pressure in the annulus that the weight of the drilling fluid is not overcoming; the head prevents the well from blowing out. It is used mainly in the drilling of formations that have low permeability. The rate of penetration through such formations is usually rapid.
Safety clamps		A clamp placed very tightly around a drill collar that is suspended in the rotary table by drill collar slips. Should the slips fail, the clamp is too large to go through the opening in the rotary table and therefore prevents the drill collar string from falling into the hole. Also called drill collar clamp.
Shaker		See “Shale Shaker”
Shale shaker		A piece of drilling rig equipment that uses a vibrating screen to remove cuttings from the circulating fluid in rotary drilling operations. The size of the openings in the screen should be selected carefully to be the smallest size possible to allow 100 per cent flow of the fluid. Also called a shaker.
Slim-hole completions (Slim-hole Drilling)		Drilling in which the size of the hole is smaller than the conventional hole diameter for a given depth. This decrease in hole size enables the operator to run smaller casing, thereby lessening the cost of completion.
Slips		Wedge-shaped pieces of metal with serrated inserts (dies) or other gripping elements, such as serrated buttons, that suspend the drill pipe or drill collars in the master bushing of the rotary table when it is necessary to disconnect the drill stem from the kelly or from the top-drive unit’s drive shaft. Rotary slips fit around the drill pipe and wedge against the master bushing to support the pipe. Drill collar slips fit around a drill collar and wedge against the master bushing to support the drill collar. Power slips are pneumatically or hydraulically actuated devices that allow the crew to dispense with the manual handling of slips when making a connection.
Solids		See “Cuttings”
Spinning wrench		Air-powered or hydraulically powered wrench used to spin drill pipe in making or breaking connections.
Spinning-in		The rapid turning of the drill stem when one length of pipe is being joined to another. “Spinning-out” refers to separating the pipe.
Stand		The connected joints of pipe racked in the derrick or mast when making a trip. On a rig, the usual stand is about 90 feet (about 27 meters) long (three lengths of drill pipe screwed together), or a treble.
String Sucker rod Tensioner		The entire length of casing, tubing, sucker rods, or drill pipe run into a hole. A special steel pumping rod. Several rods screwed together make up the link between the pumping unit on the surface and the pump at the bottom of the well.    A system of devices installed on a floating offshore drilling rig to maintain a constant tension on the riser pipe, despite any vertical motion made by the rig. The guidelines must also be tensioned, so a separate tensioner system is provided for them.
Thermal desorption		The process of removing drilling mud from cuttings by applying heat directly to drill cuttings.

Top drive		A device similar to a power swivel that is used in place of the rotary table to turn the drill stem. It also includes power tongs. Modern top drives combine the elevator, the tongs, the swivel, and the hook. Even though the rotary table assembly is not used to rotate the drill stem and bit, the top-drive system retains it to provide a place to set the slips to suspend the drill stem when drilling stops.
Torque wrench		Spinning wrench with a gauge for measuring the amount of torque being applied to the connection.
Trouble cost		Costs incurred as a result or unanticipated complications while drilling a well. These cost are often referred to as contingency costs during the planning phase of a well.
Well completion		1. The activities and methods of preparing a well for the production of oil and gas or for other purposes, such as injection; the method by which one or more flow paths for hydrocarbons are established between the reservoir and the surface. 2. The system of tubulars, packers, and other tools installed beneath the wellhead in the production casing; that is, the tool assembly that provides the hydrocarbon flow path or paths.
Well stimulation		Any of several operations used to increase the production of a well, such as acidizing or fracturing.
Well workover		The performance of one or more of a variety of remedial operations on a producing oilwell to try to increase production oilwell to try to increase production. Examples of workover jobs are deepening, plugging back, pulling and resetting liners, and squeeze cementing.
Wellbore		A borehole; the hole drilled by the bit. A wellbore may have casing in it or it may be open (uncased); or part of it may be cased, and part of it may be open. Also called a borehole or hole.
Wireline		A slender, rodlike or threadlike piece of metal usually small in diameter, that is used for lowering special tools (such as logging sondes, perforating guns, and so forth) into the well. Also called slick line.

ITEM 1B. UNRESOLVED STAFF COMMENTS

None.

ITEM 2. PROPERTIES

The Company owned or leased approximately 638 facilities worldwide as of December 31, 2006, including the following principal manufacturing, service, distribution and administrative facilities:

				Building		Property					Lease
				Size (Square		Size		Owned/			Termination
Location		Description		Feet)		(Acres)		Leased			Date
Rig Technology:
Lanzhou, China		Mfg. Plant (Drilling Equipment) &		1,370,957		38		Building			10/20/20
		Administrative Offices						Owned	*
Houston, Texas		West Little York Manufacturing		619,000		34		Owned
		Facility, Repair, Service,
		Administrative & Sales Offices
Pampa, Texas		Mfg. Plant		548,000		400		Owned
Houston, Texas		Mfg. Plant (Drilling Machinery and Equip)		417,000				Leased			Various
Carquefou, France		Mfg. Plant (Offshore Equipment)		213,000				Owned
Houston, Texas		Mfg. Plant (Braking Systems)		200,000		24		Owned
Houston, Texas		Mfg. Plant (Electrical Power Systems)		184,000		11		Owned
Houston, Texas		Mfg. Plant (Drilling Rigs and Components)		178,000				Owned
Fort Worth, Texas		Coiled Tubing Manufacturing Facility,		167,999		31		Leased			01/31/14
		Warehouse, Administrative & Sales
		Offices
Kristiansand, Norway		Mfg. (Drilling and Offshore Equipment)		157,000				Owned
Orange, California		Manufacturing & Office Facility - 759		126,000		9		Building			04/30/12
		N. Eckhoff						Owned	*
Aberdeen, Scotland		Pressure Control Manufacturing,		107,974		8		Leased			08/31/19
		Administrative & Sales
Anderson, Texas		Rolligon Mfg. Facility,		105,000		35		Leased			11/06/11
		Administrative & Sales Offices
Conroe, Texas		Mfg., Administration & Sales		86,000				Leased			12/31/21
Molde, Norway		Mfg. (Marine Handling Equipment)		78,000				Owned
Mexicali, Mexico		Mfg. Plant		76,402				Leased			04/01/14
Calgary, Alberta, Canada		Mfg. (Coiled Tubing and Wireline Units)		76,000				Owned
Etten-Leur, Netherlands		Mfg. Plant/Sales (Drilling Equipment)		75,000		6		Owned
Duncan, Oklahoma		Nitrogen Units Manufacturing		67,600		13		Owned
		Facility, Warehouse & Offices
Houston, Texas		Brittmore Shaffer Repair & Service		66,500		6		Leased			11/01/11
		Facility
Aberdeen, Scotland		Systems & Shaffer Sales, Service &		63,000		6		Owned
		Distribution Facility
Edmonton, Alberta, Canada		Mfg. (Drilling Machinery and Equip.)		61,000				Owned
Nisku, Alberta, Canada		Mfg. (Drilling Machinery and Equip.)		60,000				Owned
Calgary, Alberta,		Coiled Tubing Manufacturing Facility,
Canada		Administrative & Sales Offices		48,040		3		Owned
Stavanger, Norway		Drilling Equipment Work Shop,		41,333		1		Leased			06/01/09
		Warehouse & Customer Service Center
Tulsa, Oklahoma		Pumping Manufacturing Facility,		40,700		4		Leased			12/31/07
		Warehouse & Offices
Tuas, Singapore		Coiled Tubing & Wireline Products		35,300		2		Building			04/15/14
		Manufacturing & Administrative Facility						Owned	*

				Building		Property				Lease
				Size (Square		Size		Owned/		Termination
Location		Description		Feet)		(Acres)		Leased		Date
Singapore		Systems Offices, Service & Distribution Facility		35,079		1		Building		07/01/40
								Owned*
Orange, California		Administrative Offices—743 N. Eckhoff		35,000		2		Leased		04/30/12
Great Yarmouth, England		Coiled Tubing & Nitrogen Units Manufacturing, Administrative & Sales Offices		29,000		2		Leased		08/22/11
Petroleum Services & Supplies:
Al Khobar, Saudi		Reclamation, Inspection Facility &
Arabia		Offices		340,203		8		Leased		11/30/10
Houston, Texas		Sheldon Road: Inspection Facility		335,993		192		Owned
Houston, Texas		Holmes Road Complex: Manufacturing,		300,000		50		Owned
		Warehouse, Corporate Offices, Coating
		Manufacturing Plant & Pipeline
		Services
Little Rock, Arkansas		Fiberglass Tubular Manufacturing Plant, R&D Lab, Administrative Offices		262,784		44		Leased		01/01/07
Cedar Park, Texas		Instrumentation Manufacturing		260,000		40		Owned
		Facility, Administrative & Sales
		Offices
Manchester, England		Mfg. (Pumps and expendable parts)		244,000				Owned
Yopal, Colombia		Inspection and Solids Control Warehouse &		215,280		5		Owned
		Storage
Sand Springs, Oklahoma		Fiberglass Tubular Manufacturing Plant		189,173		7		Owned
Amelia, Louisiana		Coating Plant & Inspection Facility		179,574		84		Leased		12/31/16
Houston, Texas		QT Coiled Tubing Manufacturing		172,472		27		Owned
		Facility, Warehouse and Offices
Houston, Texas		Coating Plant & Inspection Facility		168,683		49		Owned
Tulsa, Oklahoma		Mfg. (Pumps and expendable parts)		165,000				Owned
Edmonton, Alberta, Canada		Mfg. (Downhole Tools)		162,000				Owned
Conroe, Texas		Solids Control & Pressure Control		160,000		30		Owned
		Manufacturing Facility, Warehouse,
		Administrative & Sales Offices &
		Engineering Labs
Wichita, Kansas		Fiberglass Tubular Manufacturing Plant		129,746		15		Owned
Nisku, Alberta,		Trucking, Rod Plant, Inspection & Storage		121,545		155		Owned
Canada		Facility
McAlester, Oklahoma		Mfg. (Pumps)		120,000				Owned
Nisku, Alberta,		Coating Plant, Inspection & Drill Pipe		114,000		47		Owned
Canada		Facility
Nisku, Alberta, Canada		Mfg. Downhole Tools		105,000				Owned
Amelia, Louisiana		Coating Plant, Inspection & Storage		102,000		90		Building		05/31/11
		Facilities						Owned*
Casper, Wyoming		Inspection Facility		91,720		29		Owned
Midland, Texas		Coating Plant		87,000		25		Owned
Houston, Texas		Mfg. (Downhole Tools)		86,175				Leased		12/31/18
Houston, Texas		Highway 90: Coating Plant		83,000		43		Leased		07/31/11
San Antonio, Texas		Fiberglass Tubular Manufacturing Plant,		82,700		20		Owned
		R & D Lab, Administrative Offices
Big Spring, Texas		Fiberglass Tubular Manufacturing		78,600		12		Owned
		Plant & Administrative Offices
Aberdeen, Scotland		Solids Control Manufacturing Facility		77,400		6		Owned
		Assembly, Administrative & Sales
Houston, Texas		Engineering/Technical Research Center		76,000		6		Owned
Bogota, Colombia		Solids Control & Inspection Yard & Warehouse		69,966				Leased		08/01/07

				Building		Property				Lease
				Size (Square		Size		Owned/		Termination
Location		Description		Feet)		(Acres)		Leased		Date
Navasota, Texas		Coating Plant, Inspection Pipe Storage		65,000				Building		06/30/13
								Owned*
Marble Falls, Texas		Mfg. (Expendable parts)		65,000				Owned
Stafford, Texas		Mfg. and Service of Downhole tools		65,000				Owned
Leduc, Alberta, Canada		MDT, Shaffer, Chimo, Alberta Instruments, Varco Services & Warehouse Facility		64,056		5		Owned
Su Zhou, People’s Republic of China		Fiberglass Tubular Manufacturing Plant		60,000		4		Owned
Lone Star, Texas		Inspection Facility		56,700		80		Owned
Neiva, Columbia		Inspection Yard & Warehouse		54,898		1		Leased		02/01/08
Aberdeen, Scotland		Inspection Facility, Coating Plant,		53,425		10		Owned
		Manufacturing, Administrative & Sales
Coevorden, Netherlands		Inspection Reclamation & Repair Facility		53,361		2		Leased		12/04/09
Harvey, Louisiana		Coating Plant & Inspection Facility		53,000		7		Owned &		09/30/07
								Leased
Houston, Texas		Mfg. (Pumps and expendable parts)		51,000				Leased		12/31/10
Tuas, Singapore		Coating Plant & Inspection Facility		50,644		8		Building		06/09/09
								Owned*
Houston, Texas		Warehouse, Distribution and Administration		48,000				Leased		02/01/11
Odessa, Texas		Coating Plant & Inspection Facility		45,332		10		Owned
Little Rock, Arkansas		Fiberglass Tubular Manufacturing Plant		45,000				Leased		10/01/09
Berlaimont, France		Coating Plant		44,000		16		Owned
Celle, Germany		Inspection Facility, Administrative &		43,560		12		Building		2049
		Engineering Offices						Owned*
Casper, Wyoming		Inspection Facility		41,030		40		Owned
Edmond, Oklahoma		Coating Plant		40,000		19		Owned
Farmington, New Mexico		Inspection Storage Facilities		37,725		50		Leased		03/31/14
Odessa, Texas		Inspection Facility		33,910		50		Owned
Edmonton, Alberta,		Sucker Rod Inspection & Oilwell Engine Reclamation		32,550		10		Leased		04/30/13
Canada
Distribution:
Houston, Texas		Distribution and Warehouse		124,000				Owned/ Leased		12/31/21
Corporate:
Houston, Texas		Administration Offices		196,000		Office Building		Leased		12/01/17
Houston, Texas		Corporate Administrative Office		115,000		Office Building		Leased		10/31/15
Houston, Texas		Administrative Offices		48,000		Office Building		Leased		10/31/15

We own or lease 305 repair and manufacturing facilities that refurbish and manufacture new equipment and parts, and approximately 182 distribution service centers, and 150 service centers that provide inspection and equipment rental worldwide.

We own undeveloped acreage next to several of our facilities, including over 100 acres of undeveloped property located in Houston, Texas. Machinery, equipment, buildings, and other facilities owned and leased are considered by management to be adequately maintained and adequate for our operations.

ITEM 3. LEGAL PROCEEDINGS

We have various claims, lawsuits and administrative proceedings that are pending or threatened, all arising in the ordinary course of business, with respect to commercial, product liability and employee matters. Although no assurance can be given with respect to the outcome of these or any other pending legal and administrative proceedings and the effect such outcomes may have, we believe any ultimate liability resulting from the outcome of such claims, lawsuits or administrative proceedings will not have a material adverse effect on our consolidated financial statements.

ITEM 4. SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS

No matters were submitted to a vote of security holders during the quarter ended December 31, 2006.

PART II

ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Market Information

Our common stock is traded on the New York Stock Exchange (NYSE) under the symbol “NOV”. The following table sets forth, for the calendar periods indicated, the range of high and low closing prices for the common stock, as reported by the NYSE:

		2006								2005
		High				Low				High				Low
1st Quarter			76.54				57.00				50.21				33.23
2nd Quarter			71.85				56.50				48.52				39.74
3rd Quarter			68.08				56.33				67.45				46.70
4th Quarter			68.12				52.08				66.52				55.18

As of February 9, 2007, there were 1,399 holders of record (excluding individual participants in securities positions listing) of our common stock. Many stockholders choose to own shares through brokerage accounts and other intermediaries rather than as holders of record so the actual number of stockholders is unknown but significantly higher. We have never paid cash dividends, and none are anticipated during 2007.

The information relating to our equity compensation plans required by Item 5 is incorporated by reference to such information as set forth in Item 12. “Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters” contained herein.

PERFORMANCE GRAPH

The graph below compares the cumulative total shareholder return on our common stock to the S&P 500 Index and the S&P Oil & Gas Equipment & Services Index. The total shareholder return assumes $100 invested on December 31, 2001 in National Oilwell Varco, the S&P 500 Index and the S&P Oil & Gas Equipment & Services Index. It also assumes reinvestment of all dividends. The peer group is weighted based on the market capitalization of each company. The results shown in the graph below are not necessarily indicative of future performance.

			Cumulative Total Return
				12/01					12/02					12/03					12/04					12/05					12/06
	National Oilwell Varco				100.00					105.97					108.49					171.23					304.22					296.85
	S&P 500				100.00					77.90					100.24					111.15					116.61					135.03
	S&P Oil & Gas Equipment & Services				100.00					88.51					110.41					145.60					216.30					249.92

This information shall not be deemed to be “soliciting material” or to be “filed” with the Commission or subject to Regulation 14A (17 CFR 240.14a-1 – 240.14a-104), other than as provided in Item 201(e) of Regulation S-K, or to the liabilities of section 18 of the Exchange Act (15 U.S.C. 78r).

ITEM 6. SELECTED FINANCIAL DATA

		Year Ended December 31,
		2006				2005 (1)				2004				2003				2002 (2)
						(dollars in millions, except per share data)
Operating Data:
Revenue		$	7,025.8			$	4,644.5			$	2,318.1			$	2,004.9			$	1,521.9
Operating profit			1,111.1				476.8				176.0				164.1				127.7
Income before taxes			1,049.2				430.0				138.9				121.8				106.7
Net income		$	684.0			$	286.9			$	115.2			$	79.7			$	67.1
Net income per share
Basic		$	3.90			$	1.83			$	1.34			$	0.94			$	0.83
Diluted		$	3.87			$	1.81			$	1.33			$	0.94			$	0.82
Other Data:
Depreciation and amortization		$	160.6			$	114.6			$	44.0			$	39.2			$	25.0
Capital expenditures		$	200.4			$	105.0			$	39.0			$	32.4			$	24.8
Balance Sheet Data:
Working capital		$	2,300.4			$	1,811.0			$	711.0			$	763.0			$	734.8
Total assets			9,019.3				6,678.5				2,576.5				2,213.1				1,942.5
Long-term debt, less current maturities			834.7				835.6				350.0				594.0				594.6
Stockholders’ equity			5,023.5				4,194.2				1,270.2				1,059.2				899.3

ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

General Overview

The Company is a leading worldwide provider of highly engineered drilling and well-servicing equipment, products and services to the exploration and production segments of the oil and gas industry. With operations in over 600 locations across six continents, we design, manufacture and service a comprehensive line of drilling and well servicing equipment; sell and rent drilling motors, specialized downhole tools, and rig instrumentation; perform inspection and internal coating of oilfield tubular products; provide drill cuttings separation, management and disposal systems and services; provide expendables and spare parts used in conjunction with our large installed base of equipment; and provide supply chain management services through our distribution network. We also manufacture coiled tubing, provide in-service pipeline inspections, manufacture high pressure fiberglass and composite tubing, and sell and rent advanced in-line inspection equipment to makers of oil country tubular goods. We have a long tradition of pioneering innovations which improve the cost-effectiveness, efficiency, safety, and environmental impact of oil and gas operations.

Our revenues and operating results are directly related to the level of worldwide oil and gas drilling and production activities and the profitability and cash flow of oil and gas companies and drilling contractors, which in turn are affected by current and anticipated prices of oil and gas. Oil and gas prices have been and are likely to continue to be volatile. See “Risk Factors”. We conduct our operations through three business segments: Rig Technology, Petroleum Services & Supplies and Distribution Services. See Item 1. Business for a discussion of each of these business segments.

Operating Environment Overview

Our results are dependent on, among other things, the level of worldwide oil and gas drilling, well remediation activity, the price of crude oil and natural gas, capital spending by other oilfield service companies and drilling contractors, pipeline maintenance activity, and the worldwide oil and gas inventory levels. Key industry indicators for the past three years include the following:

														%				%
														2006 vs.				2006 vs.
		2006*				2005*				2004*				2005				2004
Active Drilling Rigs:
U.S.			1,648				1,381				1,190				19.3	%			38.5	%
Canada			470				458				369				2.6	%			27.4	%
International			925				908				836				1.9	%			10.6	%
Worldwide			3,043				2,747				2,395				10.8	%			27.1	%
Active Workover Rigs:
U.S.			1,572				1,354				1,236				16.1	%			27.2	%
Canada			626				654				615				(4.3	%)			1.8	%
North America			2,198				2,008				1,851				9.5	%			18.7	%
West Texas Intermediate Crude Prices (per barrel)		$	66.00			$	56.65			$	41.44				16.5	%			59.3	%
Natural Gas Prices ($/mmbtu)		$	6.74			$	8.83			$	5.88				(23.7	%)			14.6	%

The following table details the U.S., Canadian, and international rig activity and West Texas Intermediate Oil prices for the three years ended December 31, 2006 on a quarterly basis:

Source: Rig count: Baker Hughes, Inc. (www.bakerhughes.com); West Texas Intermediate Crude Price: Department of Energy, Energy Information Administration (www.eia.doe.gov).

Natural gas prices weakened in 2006 in comparison to 2005, while oil prices rose during the first three quarters and softened in the fourth quarter of 2006. The average price per barrel of West Texas Intermediate Crude reached historic heights in 2006, peaking at just over $77 in August. The 2006 average price for the year was the highest ever-annual average oil price at $66.00 per barrel, an increase of 16.5% over the average for 2005. Natural gas prices were $6.74 per mmbtu, a decrease of 23.7% compared to the 2005 average. Higher oil prices led to stronger rig activity worldwide, increasing 10.8% for the full year in 2006 compared to 2005.

At February 9, 2007, there were 1,731 rigs actively drilling in the U.S., compared to 1,710 rigs at December 29, 2006. The company believes that most current industry projections are forecasting commodity prices to remain strong, and, as a result, U.S., Canada, and international drilling rig activity is expected to continue at a high level. However, numerous events could significantly alter these projections including political tensions in the Middle East, the acceleration or deceleration of the recovery of the U.S. and world economies, a build up in the world inventory levels, or numerous other events or circumstances.

Executive Summary

For the full year 2006, the Company generated earnings of $684.0 million, or $3.87 per fully diluted share, on revenues of $7,025.8 million. Earnings (EPS) increased 114% and revenues increased 51% from 2005 reported results.

The Company underwent a major transformation on March 11, 2005, when National Oilwell and Varco merged. As a result, the reported financial results for 2005 do not include the 70 days of Varco operations prior to the merger. The Company has presented supplemental adjusted results in its 2005 Form 10-K/A filing to give effect to the merger as of January 1, 2005, to better identify trends in our businesses and provide more meaningful comparison. Some of the historical periods referenced in the discussion and analysis below pertain to the results on this adjusted combined basis, which the Company tends to look at internally to evaluate results. Additionally, the Company’s disclosures since the merger through the first quarter of 2006 have identified transaction, integration and stock-based compensation charges, including items such as severance, restructuring, equipment and inventory rationalization, amortization of options issued to replace Varco options, and write-offs of discontinued product lines related to the merger. The results of the historical periods discussed below may exclude these items, as noted, in order to better identify trends in our business and provide more meaningful comparison as well. The Company also

tends to look at these internally to evaluate results. Compared to combined revenues for both National Oilwell and Varco for the full year 2005 of $4,952.4 million, revenues increased 42% in 2006.

Oil & Gas Equipment and Services Market

Activity levels and demand for our products and services improved in most of our markets during 2006 as compared to 2005. Recovering economies of developed nations, and the desire for improved standards of living among many in developing nations, have increased demand for oil and gas. As a result, oil and gas prices have increased significantly compared to price levels only a few years ago, which has led to rising levels of exploration and development drilling in many oil and gas basins around the globe.

The world-wide count of rigs actively drilling during 2006 as measured by Baker Hughes increased 10.8% from 2005. The rig count is a good measure of the level of oilfield activity and spending. The worldwide active rig count decreased 1.3% from the third quarter of 2006 to the fourth quarter of 2006, due primarily to a 10.9% sequential decline in Canada. Gas prices in North America declined 7.2% in the third quarter, which led to lower levels of drilling in Canada in the fourth quarter. Despite fourth quarter improvements in gas prices, seasonally-adjusted levels of drilling in Canada remain lower than in recent years, and the Company’s outlook for Canadian activity remains guarded. The rig count in non-North American markets, which tend to be driven more by oil prices, continued to increase in the fourth quarter, and the current conditions favor continued growth in international markets in 2007. The U.S. rig count was essentially flat from the third quarter of 2006 to the fourth quarter of 2006 (up 0.1%), with increased land drilling offsetting reduced offshore drilling. The Company expects the U.S. market to show modest growth in 2007, but continued gas price weakness could lead to a reduction in activity in the U.S.

The mix of reported 2006 segment revenue of goods and services destined for U.S. markets was 37% for Rig Technology, 49% for Petroleum Services & Supplies and 60% for Distribution Services. Canadian destinations represented 4% of Rig Technology revenue, 11% of Petroleum Services & Supplies revenue and 23% of Distribution Services revenue in 2006. Non-North American destinations were 59% of Rig Technology revenue, 40% of Petroleum Services & Supplies revenue and 17% of Distribution Services revenue in 2006.

Oil and gas companies have increased their levels of investment in new oil and gas wells over the past few years, to reverse the trend of declining reserves and to grow production to satisfy the rising energy needs of the world. This has led to a level of drilling activity not seen since the early 1980’s, which has, in turn, resulted in steadily rising demand for oilfield services over the last several quarters in most markets. Much of the new incremental drilling activity is occurring in harsh environments, and employs increasingly sophisticated technology to find and produce reserves.

The rise in demand for drilling rigs has driven rig dayrates sharply higher over the past few years, which has increased cash flows and available financing to drilling contractors. Rising dayrates have caused many older rigs to be placed back into service, and we believe virtually every drilling rig that can be economically refurbished is now working. The Company has played an important role in providing the equipment, consumables and services needed to reactivate many of these older rigs.

Higher utilization of drilling rigs has tested the capability of the world’s fleet of rigs, much of which is old and of limited capability. Technology has advanced significantly since most of the existing rig fleet was built. The industry invested little during the late 1980’s and 1990’s on new drilling equipment, but drilling technology progressed steadily nonetheless, as the Company and its competitors continued to invest in new and better ways of drilling. As a consequence, the safety, reliability, and efficiency of new, modern rigs surpass the performance of most of the older rigs at work today. Oil and gas producers demand top performance from drilling rigs, particularly at the premium dayrates that are being paid today. As a result of this trend, the Company has benefited from incremental demand for new products (such as our small iron roughnecks for land rigs, our LXT BOPs, our Safe-T-Lite pump liner systems, among others) to upgrade certain rig functions to make them safer and more efficient.

Drilling rigs are now being pushed to drill deeper wells, more complex wells, highly deviated wells and horizontal wells, tasks which require larger rigs with more capabilities. Higher dayrates magnify the opportunity cost of rig downtime, and rigs are being pushed to maximize revenue days for their drilling contractor owners. The drilling process effectively consumes the mechanical components of a rig, which wear out and need periodic repair or replacement. This process has been accelerated by the high levels of rig utilization seen over the past few years. In preceding years contractors could cannibalize mechanical components from their idle rigs, rather than purchase new components. As the fleet of idle rigs has dwindled, the availability of used components has dwindled as well, which has spurred incremental demand for rig components from the Company.

Changing methods of drilling have further benefited the Company’s business. Increasingly, hydraulic power – in addition to conventional mechanical rotary power – is being used to apply torque to the drill bit. This is done using downhole drilling motors powered by drilling fluids. The Company is a major provider of downhole drilling motors, and has seen demand for this application of its drilling motors increase over the last few years. This trend has also increased demand for the Company’s high pressure mud pumps, which create the hydraulic power in the drilling fluid which drive the drilling motors.

While the increasingly efficient equipment provided by the Company has mitigated the effect, high activity levels have increased demand for personnel in the oilfield. Consequently, the Company, its customers and its suppliers have experienced wage inflation in certain markets. Hiring experienced drilling crews has been challenging for the drilling industry; however, the Company believes crews generally prefer working on newer, more modern rigs. The Company’s products which save labor and

increase efficiency (such as its automatic slips and pipe handling equipment) also make the rig crew’s jobs easier, and make the rig a more desirable place to work.

Finally, the increase in drilling rig dayrates has made the economics of building new rigs compelling in many markets. For the first time in many years, the world is actively building land rigs and offshore rigs. Approximately 73 new jackup rigs and 46 new floating rigs have been commenced since early 2005. The world’s rig fleet is aging. The average floating rig is 22 years old, the average jackup rig is 24 years old, and the average land rig is estimated to be between 25 and 30 years old. We believe that new rigs we supply are replacing older models that are too antiquated to attract experienced drilling crews or compete effectively. In spite of the many new jackup rigs scheduled for delivery over the next three years, could possibly take the industry more than 20 years to fully replace the fleet of jackup rigs at the rate that new jackup rigs are presently being built, and the average age of the fleet will to continue to increase. The growth in our backlog of capital equipment since early 2005 illustrates the pressing needs of the drilling industry, which invested very little capital in new drilling equipment for more than 20 years.

Segment Performance

Revenues for the Rig Technology group in 2006 were $3,584.9 million, up 53% from combined National Oilwell and Varco revenues of $2,335.7 million in 2005. Operating profit was $621.4 million or 17.3% of sales in 2006, compared to $264.1 million or 11.3% of sales in 2005 for National Oilwell and Varco combined, excluding transaction and integration charges from both periods. Operating profit flow-through or leverage (the period-to-period increase in operating profit divided by the increase in revenue) was 29% from 2005 to 2006, on the same adjusted basis. The 2006 results benefited from higher volumes, improving pricing, and merger-related cost savings partly offset by higher employee benefit costs and higher costs associated with purchased components.

The Company’s Rig Technology group reported a backlog of capital equipment orders totaling $6,005.7 million at December 31, 2006, up 161% from December 31, 2005. The group was awarded $6,021.6 million in new capital equipment orders in 2006, more than double its 2005 order level. The group was awarded $1,263.7 million in new capital equipment orders in the fourth quarter, down from record order levels in the third quarter, and added $132.1 million in orders to its backlog from its fourth quarter acquisition of Rolligon. The Company has the capability to supply up to approximately $48 million of equipment for a typical jackup rig, more than $230 million of equipment for a new floating rig, and effectively all of a new land rig (which can range in price from less than $1 million for a well service rig to over $50 million for a large harsh environment rig).

Our strategy targets the premium end of the market, emphasizing technology, quality and reliability. Most of the incremental growth in the backlog has been for offshore drilling packages, but demand for land equipment rose significantly during the year as well. Backlog for drilling equipment at December 31, 2006 was approximately 70% offshore and land rig equipment was 30%. The delivery of this equipment is typically tied to the construction schedule of the rig, which can take as long as four years to complete. As a result much of our backlog delivery extends well beyond 2007, and the Company has commissioning and installation work out as far as 2010. The Company expects to generate revenue out of backlog of approximately $3.2 billion in 2007, $1.8 billion in 2008, and $1.0 billion in 2009 and beyond. Currently approximately 75% of the drilling equipment in backlog is destined for international markets.

The increase in our backlog has made our execution commitments more challenging, and our quoted delivery dates have extended significantly as a result. Many of the components the Company sells now have deliveries out to 12 months or more. The Company’s manufacturing base relies on a combination of internal and external capabilities. We intend to continue to quote realistic delivery dates in view of these challenges, and have significantly increased the output of our manufacturing plants in response to the high demand. This has been accomplished by rearranging the manufacturing footprint of Varco and National Oilwell to enhance efficiency through the first 12 months following the merger, which resulted in significant year-over-year margin improvements in our Rig Technology segment. We have also rolled out Quick Response Manufacturing (QRM) and lean manufacturing techniques across a number of facilities, and have initiated conversions of several more. Additionally, we are spending more capital, to fuel further production increases. The Company is also providing its vendors with longer range forecasts to assist their planning, and placing longer term orders to match our backlog. We are also qualifying new vendors around the world, developing new supply relationships with machine shops, foundries and assembly operations throughout North America, Europe and Asia.

High oil and gas activity levels also increased demand for the Company’s Petroleum Services & Supplies group in 2006. The group posted very good results, generating $2,425.0 million in revenue, an increase of 32% from 2005 combined National Oilwell and Varco revenues of $1,838.7 million. The group’s operating profit for the year was $556.4 million or 22.9% of sales, an increase from combined National Oilwell and Varco 2005 operating profit of $328.6 million or 17.9% of sales, excluding transaction and integration charges from both years. The group generated 39% operating profit flow-through from 2005 to 2006, on the same adjusted basis, despite generally rising personnel and materials costs.

Margins for the Petroleum Services & Supplies group improved in 2006 as a result of the higher volumes and better pricing. The strong results were broad-based, with all major product and service lines up year-over-year, at higher margins. Domestic and international revenues continued to grow throughout the year; however, results in Canada through the second half of 2006 began to soften (seasonally adjusted) as many of our customers in Canada are adopting a cautious outlook and reducing activity in response to recent weakness in gas prices. This effect was partially offset by the acquisition of a controlling stake in NQL in Canada in December 2006. The remaining shares of NQL were acquired in January 2007, and the Company is presently integrating the operations into its downhole tools product line to capture an estimated $8.0 million in annual cost savings. NQL brings the group new square motor technology for performance drilling applications, a mud-lubricated bearing assembly for high temperature deep drilling, and new MWD technology. During 2006 the group benefited from high demand for new drillpipe coating services, large shipments of pipe inspection equipment into international pipe mills, and higher sales of drilling motors, fishing tools, coiled tubing, rig instrumentation packages, and solids control equipment sales and rentals. Additionally, higher oilfield activity led to high demand for drilling expendables and multiplex pumps, and large shipments of fiberglass pipe into major development projects in Kazakhstan, Chad, and elsewhere around the world.

The group has consistently posted revenue gains exceeding the growth in the rig count for the past several quarters, which illustrates the value of the technologies it brings to drilling and production operations. Its new technologies continue to gain acceptance with new customers. For example, the group is a major source of coiled tubing, which is used in hydraulic fracturing stimulation, and coal bed methane well dewatering. The group is a leading provider of fiberglass pipe, used in corrosive oilfield environments, and a leading provider of thermal desorption technologies used to clean drill cutting waste and recycle oil-based drilling fluids. The group is the leading independent provider of drilling motors for horizontal, directional, and performance drilling applications, and it provides satellite communication systems, including email accounts for drillers and tool pushers, and autodrillers to improve drilling penetration rates, to several hundred rigs around the globe. The group’s Mission product line manufactures sophisticated power sections for drilling motors, and supplies high quality liners, pistons and rods for mud pumps. The group is a leading provider of inspection and internal coating services for oilfield tubulars and drillpipe. In each of these products and services the group’s strategy is to become the preeminent leader, dedicated to providing the best service, the best products, and the best technologies to keep our customer’s operations running smoothly.

The Company’s Distribution Services segment also benefited from higher demand for maintenance, repair and operating supplies in 2006, due to increasing levels of oilfield activity. Revenues for the group were $1,369.6 million in 2006, an increase of 27% from 2005 revenues of $1,074.5 million. Operating profit was $96.1 million or 7.0% of sales in 2006, compared to $46.6 million or 4.3% of sales in 2005. Operating profit flow-through was 17% from 2005 to 2006, higher than the 10% levels seen in prior years due mainly to higher volumes and efficiencies.

Revenue growth year-over-year was broad based, with the U.S. domestic market posting the highest growth rate, followed by international markets outside North America. All areas posted double digit improvements, as many oil companies and drilling contractors are outsourcing their purchasing of routine consumable items to the group, which offers greater purchasing power and sophisticated information management techniques. Strategic alliance agreements with new customers in several areas fueled much of the growth, and margin improvements were achieved by aggregating bulk buying and close attention to costs. Purchases of large containers of consumables from Asia, and cultivation of strategic vendors worldwide, have reduced costs on many items. Once in place the strategic alliances provide the group a stable platform of business around which it can open new locations at lower risk and cost. The group has expanded around the world by following our customer’s rigs into new regions, and grown its North American business by capturing much more of the customer’s expenditures. The group is also selling more MRO supplies internally to legacy Varco organizations, which increased our leverage through greater purchase volumes.

Outlook

We believe that the outlook for the Company for 2007 remains positive, as historically high commodity prices are expected to keep overall oil and gas activity high, and as the Company enters 2007 with a record level of backlog for capital equipment for its Rig Technology group. Historically high levels of drilling across the U.S. and several major markets, including the Middle East, North Africa, the Far East and the North Sea, are expected to continue to drive good results. Nevertheless, we recognize that the warm winter of 2005 across North America has led to seasonally high gas storage levels, which have reduced spot gas prices lately. This is leading to softening in Canadian activity in particular, and some uncertainty in the outlook for continued U.S drilling, which is primarily directed at gas. However, we believe that a decline in North American gas drilling, were it to occur, would be short lived, owing to the high decline rates that many gas wells experience. Gas production from resource plays- coal bed methane, tight sands and shales- has increased to about 40% of total U.S gas production, and is believed to exhibit higher decline rates than conventional reservoirs. We believe in the longer term North America faces significant gas deliverability issues. North America has been unable to meaningfully increase gas production despite significantly higher levels of gas drilling over the past several years, due ostensibly to more rapidly declining rates of productions.

Oil prices and supply remains subject to significant political risk in many international regions. The growth of China and other emerging economies has added significant demand to the oil markets, and new sources of supply continue to prove challenging to find and produce economically. Many important oil producing countries appear to be in permanent decline. The Company expects the high oil prices that have resulted to sustain high levels of oilfield activity in 2007, provided the world’s major economies remain strong, and OPEC discipline keeps oil prices high.

The available supply of offshore rigs remains tight in many markets around the world. Quotation activity for the Rig Technology group remains brisk in international markets, including platform rig upgrade activity in the North Sea, and land and offshore rigs for the Middle East, North Africa, India, China, Russia and the Caspian region. North America appears to be easing a bit, particularly in Canada. Our moorings and crane business is increasing as several new FPSO, pipelay and construction vessel projects are ongoing, driving higher demand for knuckle boom cranes, motion compensated cranes, windlasses and winches. Several new shipyards are bidding new hulls to various drilling contractors. The Company believes that higher pricing in the backlog should lift margins further for the group in 2007, provided that it can continue to manage costs and projects effectively.

Our outlook for the Company’s Petroleum Services & Supplies segment remains good, given our activity assumptions, but we remain cautious about the outlook for drilling activity across North America, due mainly to recent gas price weakness. While we are finding general pricing improvements more difficult to effect lately, several product lines continue to raise prices, in part to cover rising costs, particularly premium alloys and labor. In particular, Canada appears to be the most competitive market we face, following high levels of inflation in the oilfield over the past two years, which has made cost control there very challenging. In the U.S. demand appears to be high and stable. We have seen older rigs laid down in the U.S., but many have been replaced by the new, efficient, fit-for-purpose rigs our Rig Technology group supplies. As a result the U.S. rig count has remained roughly flat since August. We believe that some of these older, recently idled rigs may be pressuring rig dayrates in the U.S. Pipe inventory in domestic U.S. yards has been moving downward following a reduction in activity by domestic mills and pipe processors in the fourth quarter, and activity by these customers has not yet resumed to mid-2006 levels. We believe international business for the Petroleum Services & Supplies group appears to continue to strengthen, and our pricing in these markets continues to move upward. We expect to shift certain underutilized assets from North America into these higher growth areas in the coming months.

The Company’s Distribution Services segment operates in a very competitive market, which makes further margin expansion beyond the record margin posted for 2006 very challenging. We are targeting further international expansion underpinned by new strategic alliances in 2007, and believe that these will fuel additional growth, provided we can continue to execute these smoothly. First quarter 2007 growth will prove challenging due to weather issues across the U.S., continuing activity softness in Canada, and the non-recurrence of some international project work booked in late 2006. The group instituted a number of cost reduction measures in Canada in response to the slowing market conditions there.

The Company expects its capital spending in 2007 to rise to approximately $250 million, owing to recent increases in investment in its Rig Technology group. Additionally, the Company continues to invest in rental equipment and manufacturing capability in its Petroleum Services & Supplies segment.

Results of Operations

Years Ended December 31, 2006 and December 31, 2005

The following table summarizes the Company’s revenue and operating profit by operating segment in 2006 and 2005. The actual results include results from Varco operations from the acquisition date of March 11, 2005 (in millions):

		Years Ended December 31,								Variance
		2006				2005				$				%
Revenue:
Rig Technology		$	3,584.9			$	2,216.8			$	1,368.1				61.7	%
Petroleum Services & Supplies			2,425.0				1,645.8				779.2				47.3	%
Distribution Services			1,369.6				1,074.5				295.1				27.5	%
Eliminations			(353.7	)			(292.6	)			(61.1	)			20.9	%
Total Revenue		$	7,025.8			$	4,644.5			$	2,381.3				51.3	%
Operating Profit:
Rig Technology		$	621.4			$	247.7			$	373.7				150.9	%
Petroleum Services & Supplies			556.4				300.1				256.3				85.4	%
Distribution Services			96.1				46.6				49.5				106.2	%
Unallocated expenses and eliminations			(123.7	)			(70.3	)			(53.4	)			76.0	%
Integration costs and stock-based compensation			(39.1	)			(47.3	)			8.2				(17.3	%)
Total Operating Profit		$	1,111.1			$	476.8			$	634.3				133.0	%
Operating Profit %:
Rig Technology			17.3	%			11.2	%
Petroleum Services & Supplies			22.9	%			18.2	%
Distribution Services			7.0	%			4.3	%
Total Operating Profit %			15.8	%			10.3	%

Rig Technology

Rig Technology revenue for the year ended December 31, 2006 was $3,584.9 million, an increase of $1,368.1 million (61.7%) compared to 2005. The increase can be attributed to the growing market for capital equipment, as evidenced by backlog growth, price increases implemented in 2005 and 2006, increases in spare parts and service revenue, and the merger with Varco, which was completed effective March 11, 2005. The increase in orders and backlog can be attributed to increased rig construction projects and higher capital investment by drilling contractors in 2006 as compared to 2005.

Operating profit from Rig Technology was $621.4 million for the year ended December 31, 2006, an increase of $373.7 million (150.9%) over the same period of 2005. The increase in operating profit was largely due to the increased activity and pricing discussed above and the 2005 merger with Varco. Additionally, 2005 operating profit included a second quarter charge of $21.7 million taken on a large Kazakhstan rig fabrication project as a result of additional costs attributed to higher rig-up and material costs than originally planned.

The Rig Technology group monitors its capital equipment backlog to plan its business. New orders are added to backlog only when we receive a firm written order for major drilling rig components or a signed contract related to a construction project. The capital equipment backlog was $6.0 billion at December 31, 2006, an increase of $3.7 billion (161.2%) over backlog of $2.3 billion at December 31, 2005. Substantially all of the current backlog will be delivered by the end of 2009.

Petroleum Services & Supplies

Revenue from Petroleum Services & Supplies was $2,425.0 million for 2006 compared to $1,645.8 million for 2005, an increase of $779.2 million (47.3%). In part, the increase was attributable to the addition of product lines acquired from Varco, which totaled approximately $192.9 million. The remaining increase was attributable to the higher demand for all products and services offered by the segment. Solids control equipment sales and rentals, rig instrumentation packages, drillpipe coating services,

fiberglass pipe, and pumping products achieved revenue increases ranging from 35% to 50%. These increases were the result of strong North America and worldwide drilling markets, as reflected by rig count increases of 15% and 11%, respectively, for 2006 compared to 2005. Petroleum Services & Supplies also benefited from price increases implemented during 2005.

Operating profit from Petroleum Services & Supplies was $556.4 million for 2006 compared to $300.1 million for 2005, an increase of $256.3 million (85.4%). The incremental operating profit from the addition of product lines acquired from Varco was approximately $28.4 million. The majority of the remaining increase was attributable to higher profitability across virtually all product lines, driven by higher volumes and improved pricing discussed above. Operating profit dollar increases ranging from 73% to 103% were achieved from downhole tool sales and rentals, sales of pumping products, inspection services, and solids control equipment sales and rentals.

Distribution Services

Revenue from Distribution Services totaled $1,369.6 million, an increase of $295.1 million (27%) from the prior period. The number of drilling rigs actively searching for oil and gas is a key metric for this business segment. According to the Baker Hughes rig count report, the average number of rigs operating in the world in 2006 was up 11% over the prior period. The average rig count in North America in 2006 was up 15% over the prior period to 2,118 rigs with our North American revenues up $196.9 million (27%). In the International market, revenues increased 26% while international rig count activity increased by 2%. The international revenue growth over the prior period reflects additional large contract awards, the extension of US-based contracts into the international arena, increased volume from our global alliance customers and increased export activity.

From a product perspective, maintenance, repair and operating supply (“MRO”) commodities in 2006 experienced a 33% increase over 2005. Sales of our manufactured products increased nearly 40% largely in the second half of the year. Margins were up considerably for MRO goods, driven by strategic bulk purchases and positioning of key commodities. OEM product margins were largely flat due to a large portion of these revenues locked in at fixed margins on committed contracts.

Operating income increased $49.5 million in 2006 to $96.1 million or 7.0% of revenue. Improved supplier rebates coupled with increased operating efficiencies largely achieved by absorbing the revenue increase across an already established distribution infrastructure and expense base were the main contributors to operating income improvement.

Unallocated expenses and eliminations

Unallocated expenses and eliminations were $123.7 million for the year ended December 31, 2006 compared to $70.3 million for 2005. The increase in operations costs was primarily due to greater inter-segment profit eliminations.

Integration costs and stock-based compensation

Integration and stock-based compensation costs were $39.1 million and $47.3 million for the years ended December 31, 2006 and December 31, 2005, respectively. The 2006 expense was comprised of $7.9 million of integration costs and $31.2 million of recurring stock-based compensation expense accounted for under Statement of Financial Accounting Standards Board (SFAS) No. 123(R), “Accounting for Share-Based Payments”, which was adopted effective January 1, 2006. The 2005 expense was comprised of $31.7 million of Varco merger related integration costs which included severance costs and other external costs directly related to the Merger, and $15.6 million of stock-based compensation expense related to the intrinsic value of the unvested Varco options exchanged in the Merger which were expensed over their remaining vesting periods.

Interest and financial costs

Interest and financial costs were $48.7 million for 2006 compared to $52.9 million for 2005. The decrease was primarily due to favorable interest rate movements on the Company’s outstanding interest rate swap agreements and repayment of the Company’s $150 million 6.875% Senior Notes on July 1, 2005. See summary of outstanding debt at December 31, 2006 under Liquidity and Capital Resources.

Other income (expense), net

Other income (expense), net was an expense of $31.3 million and income of $1.2 million for the years ended December 31, 2006 and December 31, 2005, respectively. The increase in expense was primarily due to a net foreign exchange loss which was $21.0 million for the year ended December 31, 2006, as compared to a net foreign exchange gain of $2.9 million for the year ended December 31, 2005. The 2006 foreign exchange losses were primarily due to the strengthening in Norwegian Kroner, British Pound Sterling, and Euro currencies compared to the U.S. Dollar. See Item 7A. “Quantitative and Qualitative Disclosures About Market Risk” Foreign Currency Exchange Rates.

Provision for income taxes

The effective tax rate for the fiscal year-ended December 31, 2006 was 33.9% compared to 32.3% for 2005. The higher 2006 tax rate was due primarily to increased state income tax expenses and charges for increases in valuation allowances related to separate company operating losses that may not be deductible in the future. The tax rates also reflect a lower percentage of

earnings in foreign jurisdictions with lower tax rates and reduced benefits in the US associated with export sales in 2006 compared to 2005. The US laws granting this tax benefit were modified as part of the American Jobs Creation Act of 2004 and this benefit will no longer be available after 2006. A new tax benefit associated with US manufacturing operations passed into law under the same Act will be phased in over a five year period beginning in 2005. Whereas the timing of the phase out of the export tax benefit and the phase in of the manufacturing tax benefit may differ, we expect the tax reduction associated with the new manufacturing deduction, when fully implemented, to be similar in amount to the export benefit. We anticipate our tax rate for 2007 to be in the range of approximately 33% to 34% for continuing operations.

Years Ended December 31, 2005 and December 31, 2004

The following table summarizes the Company’s revenue and operating profit by operating segment in 2005 and 2004 (in millions):

		Years Ended December 31,								Variance
		2005				2004				$				%
Revenue:
Rig Technology		$	2,216.8			$	1,085.5			$	1,131.3				104.2	%
Petroleum Services & Supplies			1,645.8				505.5				1,140.3				225.6	%
Distribution Services			1,074.5				905.1				169.4				18.7	%
Eliminations			(292.6	)			(178.0	)			(114.6	)			64.4	%
Total Revenue		$	4,644.5			$	2,318.1			$	2,326.4				100.4	%
Operating Profit:
Rig Technology		$	247.7			$	102.4			$	145.3				141.9	%
Petroleum Services & Supplies			300.1				62.7				237.4				378.6	%
Distribution Services			46.6				29.6				17.0				57.4	%
Unallocated expenses and eliminations			(70.3	)			(18.7	)			(51.6	)			275.9	%
Integration costs and stock-based compensation			(47.3	)			—				(47.3	)			—
Total Operating Profit		$	476.8			$	176.0			$	300.8				170.9	%
Operating Profit %:
Rig Technology			11.2	%			9.4	%
Petroleum Services & Supplies			18.2	%			12.4	%
Distribution Services			4.3	%			3.3	%
Total Operating Profit %			10.3	%			7.6	%

Operations

Revenues in 2005 were $2,326.4 million (100.4%) higher than the previous year, while operating profit was up 170.9%. The majority of the increase is attributable to the Varco acquisition which resulted in approximately $767.3 million of additional revenue in the Rig Technology group and $984.8 million for the additional product lines acquired from Varco in the Petroleum Services and Supplies group. The remainder of the increase can be attributed to the high oil and gas activity levels in 2005. Yearly average oil and gas prices in 2005 were $56.65 and $8.83, respectively, an increase of 37% and 50%, respectively, over 2004. These higher oil and gas prices have led to rising levels of exploration and development drilling in many oil and gas producing basins around the globe, causing a growth in the market for capital equipment, as evidenced by backlog growth as well as increases in spare parts and service revenue. The world-wide rig count, a good indicator of oilfield activity and spending, increased 15% in 2005 to a yearly average of 2,747 rigs, up for the third consecutive year. This has increased demand for Petroleum Services & Supplies. Sales of composite fiberglass pipe, solids control products and services, drilling motors and jars, mud pump expendables, coiled tubing pipe, rig instrumentation equipment and services, and tubular coating and inspection have all benefited from the higher levels of exploration and production investment in drilling and stimulating wells. Operating profit margins have also improved from 7.6% to 10.3% due to achieving merger synergies, higher profitability from downhole tool sales and rentals, and sales of pumping products, and increased operating efficiencies in the Distribution Services group achieved by absorbing the revenue increase across an already established distribution infrastructure.

One of our metrics used to plan the business is the capital equipment backlog. New orders are added to backlog only when we receive a firm customer purchase order for major drilling rig components or a signed contract related to a construction project. The capital equipment backlog was $2.3 billion at December 31, 2005, an increase of $1.5 billion (191.6%) over backlog of $783 million (on an adjusted basis for the Varco acquisition) at December 31, 2004. Substantially all of the current backlog will be delivered by the end of 2007.

Unallocated Expenses and Eliminations

Unallocated expenses and eliminations were $70.3 million for the year ended December 31, 2005 compared to $18.7 million for 2004. The increase in operations costs was primarily due to costs associated with Varco operations since the acquisition date and greater inter-segment profit eliminations.

Stock-based compensation

Stock-based compensation expense of $15.6 million for 2005 was related to the amortization of unvested options assumed as a result of the merger.

On February 21, 2006, the Company issued 2,340,000 stock options at an exercise price of $66.58.

Integration costs

Integration costs were $31.7 million for 2005 and consisted primarily of severance costs related to former executive officers and employees of the Company.

Interest and financial costs

Interest and financial costs were $52.9 million for 2005 compared to $38.4 million for 2004. The increase was primarily due to interest costs associated with debt assumed in the Varco transaction. See summary of outstanding debt at December 31, 2005 under Liquidity and Capital Resources.

Provision for income taxes

The effective tax rate for the fiscal year-ended December 31, 2005 was 32.3% compared to 15.6% for 2004. The lower 2004 tax rate was due primarily to a non-recurring tax credit of $17 million resulting from the release of a valuation allowance related to the American Jobs Creation Act of 2004. The tax rates reflect a lower percentage of earnings in foreign jurisdictions with lower tax rates and reduced benefits in the US associated with export sales in 2005 compared to 2004. The US laws granting this tax benefit were modified as part of the American Jobs Creation Act of 2004 and this benefit will be phased out over the next year. A new tax benefit associated with US manufacturing operations passed into law under the same Act will be phased in over the five years beginning in 2005. Whereas the timing of the phase out of the export tax benefit and the phase in of the manufacturing tax benefit may differ, we expect the tax reduction associated with the new manufacturing deduction, when fully implemented, to be similar in amount to the export benefit.

Liquidity and Capital Resources

At December 31, 2006, the Company had cash and cash equivalents of $957.4 million, and total debt of $840.3 million. At December 31, 2005, cash and cash equivalents were $209.4 million and total debt was $841.3 million. The increase in cash holdings was primarily a result of increased operating activities and securing project orders that require large down payments and early payment terms. The Company’s outstanding debt at December 31, 2006 consisted of $200.0 million of 5.65% senior notes due 2012, $200.0 million of 7.25% senior notes due 2011, $150.0 million of 6.5% senior notes due 2011, $150.0 million of 5.5% senior notes due 2012, $100.0 million of 7.5% senior notes due 2008, and other debt of $40.3 million. Included in other debt is the fair market value adjustment of the Varco debt assumed in the acquisition, which resulted in additional debt recognition of $29.2 million. The difference is being amortized to interest expense over the remaining life of the debt.

Cash provided by operating activities in 2006 was $1,216.7 million compared to cash provided by operating activities of $77.5 million in 2005. Cash was used by operations primarily through increases in inventories of $619.9 million, receivables of $442.1 million, prepaid and other current assets of $101.7 million and accounts payable of $93.5 million. These negative cash flows were offset by net income of $684.0 million and increases in other assets and liabilities of $1,085.0 million, billings in excess of costs of $466.4 million and non-cash charges of $160.6 million. Receivables increased due to greater revenue, pricing and activity in the fourth quarter of 2006 compared to the fourth quarter of 2005, while inventory and accrued liabilities increased due to continued higher costs, activity, growing backlog orders, and customer prepayments. Billings in excess of costs increased due to early payment terms in relation to construction projects.

For the fiscal year-ended 2006, cash used by investing activities was $530.1 million compared to $38.0 million provided for 2005. We used $253.8 million to purchase NQL Energy Services in December 2006. Another $75.9 million was used in nine other acquisitions, including Rolligon, Ltd and Soil Recovery A/S. Capital spending of $200.4 million was primarily related to rental

assets associated with the Company’s Petroleum Services & Supplies operations and capital expansion related to increased capacity for manufacturing operations.

For the fiscal year-ended 2006, cash provided by financing activities was $41.1 million compared to cash used of $40.4 million in 2005. Cash was provided by financing activities through proceeds from stock options exercised of $32.7 million and excess tax benefit from exercise of stock options of $13.5 million, offset by payments against lines of credit and other debt of $35.1 million.

On June 21, 2005, we amended and restated our existing $150 million revolving credit facility with a syndicate of lenders to provide the Company a $500 million unsecured revolving credit facility. The facility will expire in July 2010, and replaces the Company’s $175 million North American revolving credit facility and our Norwegian facility. Subject to certain conditions, the Company has the right to increase the facility to $750 million and to extend the term of the facility for an additional year. At December 31, 2006, there were no borrowings against this facility, and there were $254 million in outstanding letters of credit. Interest under this multicurrency facility is based upon LIBOR, NIBOR or EURIBOR plus 0.30% subject to a ratings-based grid, or the prime rate.

We believe cash generated from operations and amounts available under the credit facilities and from other sources of debt will be sufficient to fund operations, working capital needs, capital expenditure requirements and financing obligations. We also believe increases in capital expenditures caused by any need to increase manufacturing capacity can be funded from operations or through debt financing.

A summary of the Company’s outstanding contractual obligations at December 31, 2006 is as follows (in millions):

						Payment Due by Period
						Less than 1												After 5
		Total				Year				1-3 Years				4-5 Years				Years
Total debt		$	840.3			$	5.6			$	126.0			$	357.8			$	350.9
Operating leases			231.8				57.1				77.1				39.3				58.3
Total contractual obligations		$	1,072.1			$	62.7			$	203.1			$	397.1			$	409.2
Standby letters of credit		$	833.6			$	405.9			$	259.9			$	167.6			$	0.2

We intend to pursue additional acquisition candidates, but the timing, size or success of any acquisition effort and the related potential capital commitments cannot be predicted. The Company expects to increase its capital spending approximately 25% in 2007 to a range of $250 million. We expect to fund future cash acquisitions and capital spending primarily with cash flow from operations and borrowings, including the unborrowed portion of the credit facility or new debt issuances, but may also issue additional equity either directly or in connection with acquisitions. There can be no assurance that additional financing for acquisitions will be available at terms acceptable to us.

Inflation has had an impact on certain of our operations in recent years. We believe that the higher costs for energy, steel and other commodities experienced in 2006 have largely been mitigated by increased prices and component surcharges for the products we sell. However, higher steel, labor, energy or other commodity prices may adversely impact future periods.

Critical Accounting Estimates

In preparing the financial statements, we make assumptions, estimates and judgments that affect the amounts reported. We periodically evaluate our estimates and judgments that are most critical in nature which are related to revenue recognition under long-term construction contracts; allowance for doubtful accounts; inventory reserves; impairments of long-lived assets (excluding goodwill); goodwill impairment and income taxes. Our estimates are based on historical experience and on our future expectations that we believe are reasonable. The combination of these factors forms the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results are likely to differ from our current estimates and those differences may be material.

Revenue Recognition under Long-term Construction Contracts

The Company uses the percentage-of-completion method to account for certain long-term construction contracts in the Rig Technology group. These long-term construction contracts include the following characteristics:

	•		the contracts include custom designs for customer specific applications;
	•		the structural design is unique and requires significant engineering efforts; and

•

construction projects often have progress payments.

This method requires the Company to make estimates regarding the total costs of the project, progress against the project schedule and the estimated completion date, all of which impact the amount of revenue and gross margin the Company recognizes in each reporting period. The Company prepares detailed cost to complete estimates at the beginning of each project. Significant projects and their related costs and profit margins are updated and reviewed at least quarterly by senior management. Factors that may affect future project costs and margins include shipyard access, weather, production efficiencies, availability and costs of labor, materials and subcomponents and other factors as mentioned in “Risk Factors.” These factors can impact the accuracy of the Company’s estimates and materially impact the Company’s future reported earnings.

Historically, the Company’s estimates have been reasonably dependable regarding the recognition of revenues and gross profits on percentage of completion contracts, excluding $21.7 million of losses recorded in 2005 resulting from changes in cost estimates relating to two rigs delivered to Kazakhstan as discussed in “Management’s Discussion and Analysis of Financial Condition and Results of Operations.” Excluding these losses, and based upon an analysis of percentage of completion contracts for all open contracts outstanding at December 31, 2005 and 2004, adjustments (representing the differences between the estimated and actual results) to all outstanding contracts resulted in changes to gross profit margins of 1.1% ($12.1 million on $1.1 billion of outstanding contracts) and 0.9% ($7.3 million on $697.3 million of outstanding contracts, respectively). While the Company believes that its estimates on outstanding contracts at December 31, 2006 and in future periods will continue to be reasonably dependable under percentage of completion accounting, the factors identified in the preceding paragraph could result in significant adjustments in future periods. The Company has recorded revenue on outstanding contracts of $1.6 billion at December 31, 2006.

Allowance for Doubtful Accounts

The determination of the collectibility of amounts due from customer accounts requires the Company to make judgments regarding future events and trends. Allowances for doubtful accounts are determined based on a continuous process of assessing the Company’s portfolio on an individual customer and overall basis. This process consists of a thorough review of historical collection experience, current aging status of the customer accounts, and financial condition of the Company’s customers. Based on a review of these factors, the Company will establish or adjust allowances for specific customers and the accounts receivable portfolio as a whole. A substantial portion of the Company’s revenues come from international oil companies, international shipyards, international oilfield service companies, and government-owned or government-controlled oil companies. Therefore, the Company has significant receivables in many foreign jurisdictions. If worldwide oil and gas drilling activity or changes in economic conditions in foreign jurisdictions deteriorate, the creditworthiness of the Company’s customers could also deteriorate and they may be unable to pay these receivables, and additional allowances could be required. At December 31, 2006 and 2005, allowance for bad debts totaled $30.4 million and $17.4 million, or 1.9% and 1.5% of accounts receivable before the allowance, respectively.

Historically, the Company’s charge-offs and provisions for the allowance for doubtful accounts have been immaterial to the Company’s consolidated financial statements. However, because of the risk factors mentioned above, changes in our estimates could become material in future periods.

Inventory Reserves

Inventory is carried at the lower of cost or estimated net realizable value. The Company determines reserves for inventory based on historical usage of inventory on-hand, assumptions about future demand and market conditions, and estimates about potential alternative uses, which are usually limited. The Company’s inventory consists of specialized spare parts, work in process, and raw materials to support ongoing manufacturing operations and the Company’s large installed base of specialized equipment used throughout the oilfield. Customers rely on the Company to stock these specialized items to ensure that their equipment can be repaired and serviced in a timely manner. The Company’s estimated carrying value of inventory therefore depends upon demand driven by oil and gas drilling and well remediation activity, which depends in turn upon oil and gas prices, the general outlook for economic growth worldwide, available financing for the Company’s customers, political stability in major oil and gas producing areas, and the potential obsolescence of various types of equipment we sell, among other factors. At December 31, 2006 and 2005, inventory reserves totaled 4.7% and 4.5% of gross inventory, respectively. Recent high demand and a strong outlook for oilfield equipment sales provide the basis for the Company’s December 31, 2006 and 2005 estimates regarding the future usage and realizable value of inventory.

While inventory reserves and accruals have not had a material impact on the Company’s financial results for the periods covered in this report, changes in worldwide oil and gas activity, or the development of new technologies which make older drilling

technologies obsolete, could require the Company to record additional allowances to reduce the value of its inventory. Such changes in our estimates could be material under weaker market conditions or outlook.

Impairment of Long-Lived Assets (Excluding Goodwill)

Long-lived assets, which include property, plant and equipment and identified intangible assets, comprise a significant amount of the Company’s total assets. The Company makes judgments and estimates in conjunction with the carrying value of these assets, including amounts to be capitalized, depreciation and amortization methods and estimated useful lives.

Additionally, the carrying values of these assets are reviewed for impairment periodically or whenever events or changes in circumstances indicate that the carrying amounts may not be recoverable. An impairment loss is recorded in the period in which it is determined that the carrying amount is not recoverable. This requires the Company to make long-term forecasts of its future revenues and costs related to the assets subject to review. These forecasts require assumptions about demand for the Company’s products and services, future market conditions and technological developments. The forecasts are dependent upon assumptions regarding oil and gas prices, the general outlook for economic growth worldwide, available financing for the Company’s customers, political stability in major oil and gas producing areas, and the potential obsolescence of various types of equipment we sell, among other factors. Significant and unanticipated changes to these assumptions or the intended use of these assets could require a provision for impairment in a future period. There have been no impairment charges of long-lived assets for the years ended December 31, 2006, 2005, and 2004.

Goodwill Impairment

The Company recorded approximately $2.2 billion of goodwill on its consolidated balance sheet as of December 31, 2006. Generally accepted accounting principles require the Company to test goodwill for impairment on an annual basis or whenever events or circumstances occur indicating that goodwill might be impaired. Events or circumstances which could indicate a potential impairment of goodwill could include (but are not limited to) a significant reduction in worldwide oil and gas prices or drilling; a significant reduction in profitability or cash flow of oil and gas companies or drilling contractors; a significant reduction in worldwide well remediation activity; a significant reduction in capital investment by other oilfield service companies; or a significant increase in worldwide inventories of oil or gas. The timing and magnitude of any goodwill impairment charge, which could be material, would depend on the timing and severity of the event or events triggering the charge and would require a high degree of management judgment.

The Company performs a review of goodwill for impairment annually or earlier if indicators of potential impairment exist. The annual impairment tests are performed during the fourth quarter of each year. If it is determined that goodwill is impaired, that impairment is measured based on the amount by which the book value of goodwill exceeds its implied fair value. The implied fair value of goodwill and identified intangibles is determined by deducting the fair value of a reporting unit’s identifiable assets and liabilities from the fair value of that reporting unit as a whole. Additional impairment assessments may be performed on an interim basis if the Company encounters events or changes in circumstances that would indicate that, more likely than not, the carrying amount of goodwill and identified intangibles has been impaired. Fair value of the reporting units is determined based on internal management estimates, using a combination of three methods: discounted cash flow, comparable companies, and representative transactions. Changes in the assumptions used in the fair value calculation could result in an estimated reporting unit fair value that is below the carrying value, which may give rise to an impairment of goodwill. In addition to the annual review, the Company also tests for impairment should an event occur or circumstances change that may indicate a reduction in the fair value of a reporting unit below its carrying value. The Company had no impairment of goodwill for the years ended December 31, 2006, 2005, and 2004.

Income Taxes

The Company is a US registered company and is subject to income taxes in the US. The Company operates through various subsidiaries in a number of countries throughout the world. Income taxes have been provided based upon the tax laws and rates of the countries in which the Company operates and income is earned.

The Company’s annual tax provision is based on expected taxable income, statutory rates and tax planning opportunities available in the various jurisdictions in which it operates. The determination and evaluation of the annual tax provision and tax positions involves the interpretation of the tax laws in the various jurisdictions in which the Company operates. It requires significant judgment and the use of estimates and assumptions regarding significant future events such as the amount, timing and character of income, deductions and tax credits. Changes in tax laws, regulations, and treaties, foreign currency exchange restrictions or the Company’s level of operations or profitability in each jurisdiction could impact the tax liability in any given year. The Company also operates in many jurisdictions where the tax laws relating to the pricing of transactions between related parties are

open to interpretation, which could potentially result in aggressive tax authorities asserting additional tax liabilities with no offsetting tax recovery in other countries.

The Company maintains liabilities for estimated tax exposures in jurisdictions of operation. The annual tax provision includes the impact of income tax provisions and benefits for changes to liabilities that the Company considers appropriate, as well as related interest. Tax exposure items primarily include potential challenges to intercompany pricing and certain tax credits which may not ultimately be sustained. These exposures are resolved primarily through the settlement of audits within these tax jurisdictions or by judicial means. The Company is subject to audits by federal, state and foreign jurisdictions which may result in proposed assessments. The Company believes that an appropriate liability has been established for estimated exposures under the guidance in Statement of Financial Accounting Standards (“SFAS”) No. 5, Accounting for Contingencies. However, actual results may differ materially from these estimates. The Company reviews these liabilities quarterly and to the extent audits or other events result in an adjustment to the liability accrued for a prior year, the effect will be recognized in the period of the event.

The Company currently has recorded valuation allowances that the Company intends to maintain until it is more likely than not the deferred tax assets will be realized. Other than valuation allowances associated with tax attributes acquired through acquisitions, income tax expense recorded in the future will be reduced to the extent of decreases in the Company’s valuation allowances. The realization of remaining deferred tax assets is primarily dependent on future taxable income. Any reduction in future taxable income including but not limited to any future restructuring activities may require that the Company record an additional valuation allowance against deferred tax assets. An increase in the valuation allowance would result in additional income tax expense in such period and could have a significant impact on future earnings. If a change in a valuation allowance occurs, which was established in connection with an acquisition, such adjustment may impact goodwill rather than the income tax provision.

As the result of current period earnings and changes in estimates of future taxable income in certain tax jurisdictions, the Company recognized a decrease of $18.6 million in goodwill during the fourth quarter of 2005 related to the reversal of a valuation allowance associated with net operating loss carryovers acquired in the February 28, 2000 acquisition of Hitec, AS.

The Company has not provided for deferred taxes on the unremitted earnings of certain subsidiaries that are permanently reinvested. Should the Company make a distribution from the unremitted earnings of these subsidiaries, the Company may be required to record additional taxes. Unremitted earnings of these subsidiaries were $1,116.3 million and $441.4 million at December 31, 2006 and 2005, respectively. The Company makes an annual determination whether to permanently reinvest these earnings. If, as a result of these reassessments, the Company distributes these earnings in the future, additional tax liability would result, offset by any available foreign tax credits.

The Company does not believe it is possible to reasonably estimate the potential impact of changes to the assumptions and estimates identified because the resulting change to our tax liability, if any, is dependent on numerous factors which cannot be reasonably estimated. These include, among others, the amount and nature of additional taxes potentially asserted by local tax authorities; the willingness of local tax authorities to negotiate a fair settlement through an administrative process; the impartiality of the local courts; and the potential for changes in the tax paid to one country to either produce, or fail to produce, an offsetting tax change in other countries.

Recently Issued Accounting Standards