10-K


 

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549

FORM 10-K
[X] ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
 
For the fiscal year ended December 31, 2015
 
[ ] TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
 
For the transition period from _______________________________ to_________________________________________
Commission File Number: 0-52105
KAISER ALUMINUM CORPORATION
(Exact name of registrant as specified in its charter)
Delaware
 
94-3030279
(State or other jurisdiction of incorporation or organization)
 
(I.R.S. Employer Identification No.)
 
 
 
27422 Portola Parkway, Suite 200 Foothill Ranch, California
 
92610-2831
(Address of principal executive offices)
 
(Zip Code)
 
 (949) 614-1740                                                                                            
 
(Registrant's telephone number, including area code)
 
 
 
Securities registered pursuant to Section 12(b) of the Act:
Title of each class
 
Name of each exchange on which registered
Common stock, par value $0.01 per share
 
Nasdaq Stock Market LLC
 
 
 
Securities registered pursuant to section 12(g) of the Act:
 
None
 
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes þ No o
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of Act.    Yes o No þ
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.         Yes þ No o
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).     Yes þ No o
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment of this Form 10-K.         þ
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of "large accelerated filer," "accelerated filer" and "smaller reporting company" in Rule 12b-2 of the Exchange Act
Large accelerated filer þ
Accelerated filer o
 
 
Non-accelerated filer o  (Do not check if a smaller reporting company)
Smaller reporting company o
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes o No þ
The aggregate market value of the registrant's common stock held by non-affiliates of the registrant as of the last business day of the registrant's most recently completed second fiscal quarter (June 30, 2015) was approximately $1.4 billion.
As of February 12, 2016, there were 17,995,363 shares of the Common Stock of the registrant outstanding.




Documents Incorporated by Reference. Certain portions of the registrant’s definitive proxy statement related to the registrant’s 2016 annual meeting of stockholders are incorporated by reference into Part III of this Annual Report on Form 10-K.
TABLE OF CONTENTS

 
Business
Risk Factors
Unresolved Staff Comments
Properties
Legal Proceedings
Mine Safety Disclosures
 
 
 
 
Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities
Selected Financial Data
Management’s Discussion and Analysis of Financial Condition and Results of Operations
Quantitative and Qualitative Disclosures About Market Risk
Financial Statements and Supplementary Data
Changes in and Disagreements with Accountants on Accounting and Financial Disclosure
Controls and Procedures
Other Information
 
 
 
 
Directors, Executive Officers and Corporate Governance
Executive Compensation
Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters
Certain Relationships and Related Transactions and Director Independence
Principal Accountant Fees and Services
 
 
 
 
Exhibits and Financial Statement Schedules
 
 
 
 
 
 
 
 
 
 
 




PART I
Forward-Looking Statements
This Annual Report on Form 10-K (this "Report") contains statements which constitute "forward-looking statements" within the meaning of the Private Securities Litigation Reform Act of 1995. These statements appear throughout this Report, including Item 1. "Business – Business Operations," Item 1A. "Risk Factors," and Item 7. "Management’s Discussion and Analysis of Financial Condition and Results of Operations." These forward-looking statements can be identified by the use of forward-looking terminology such as "believes," "expects," "may," "estimates," "will," "should," "plans," or "anticipates," or the negative of the foregoing or other variations or comparable terminology, or by discussions of strategy.
Readers are cautioned that any such forward-looking statements are not guarantees of future performance and involve significant risks and uncertainties and that actual results may vary from those in the forward-looking statements as a result of various factors. These factors include: the effectiveness of management’s strategies and decisions; general economic and business conditions, including cyclicality and other conditions in the aerospace, automotive and other end markets we serve; developments in technology; new or modified statutory or regulatory requirements; changing prices and market conditions; and other factors discussed in Item 1A. "Risk Factors" and elsewhere in this Report. No assurance can be given that these are all of the factors that could cause actual results to vary materially from the forward-looking statements.
Readers are urged to consider these factors carefully in evaluating any forward-looking statements and are cautioned not to place undue reliance on these forward-looking statements. The forward-looking statements included herein are made only as of the date of this Report and we undertake no obligation to update any information contained in this Report or to publicly release any revisions to any forward-looking statements that may be made to reflect events or circumstances that occur, or that we become aware of, after the date of this Report except as required by law.
Item 1. Business
Availability of Information
We file Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, Proxy Statements and other information with the Securities and Exchange Commission ("SEC"). You may inspect and, for a fee, copy any document that we file with the SEC at the SEC's Public Reference Room at 100 F Street, N.E., Washington, D.C. 20549. Please call the SEC at 1-800-SEC-0330 for further information on the Public Reference Room. You may also obtain the documents that we file electronically from the SEC's website at http://www.sec.gov. Our filings with the SEC, as well as news releases, announcements of upcoming earnings calls and events in which our management participates or hosts with members of the investment community and an archive of webcasts of such earnings calls and investor events and related investor presentations, are also available on our website at http://www.kaiseraluminum.com. Information on our website is not incorporated into this Report.
Business Overview
Kaiser Aluminum Corporation’s primary line of business is the production of semi-fabricated specialty aluminum mill products. Fabricated aluminum mill products are broadly defined to include flat-rolled, extruded, drawn, forged and cast aluminum products used in a variety of end market applications. We focus on technically challenging applications for flat-rolled and extruded/drawn products that allow us to utilize our core metallurgical and process technology capabilities to produce highly engineered products with differentiated characteristics that present opportunities for us to receive premium pricing. The key end market applications we have strategically chosen to serve are aerospace/high strength ("Aero/HS products"), automotive ("Automotive Extrusions") and general engineering ("GE products"). We additionally produce a small amount of products for other end market applications ("Other products"). In 2015, we produced and shipped from our 12 North American facilities approximately 615.4 million pounds of semi-fabricated specialty aluminum mill products, which comprised all of our consolidated net sales of approximately $1.4 billion.
A fundamental part of our business model is to mitigate the impact of aluminum price volatility. We purchase primary and scrap aluminum, our main raw material, at prices that fluctuate on a monthly basis, and we use pricing policies that generally allow us to pass metal cost fluctuations through to our customers. For some of our higher value added products sold on a spot basis, however, the pass through of metal price movements can sometimes lag by as much as several months. Additionally, we often enter into firm-price customer sales agreements that specify the underlying metal price plus a conversion price. Spot sales with lagged metal price pass through and firm-price sales agreements create metal price exposure for us which we mitigate through a hedging program. Our pricing policies and hedging program are designed to largely mitigate the impact on our profitability of fluctuations in underlying metal price.

1



At December 31, 2015, we operated 12 focused production facilities, 11 in the United States and one in Canada, with approximately 2,790 employees.
We have long-standing relationships with our customers, which consist primarily of blue-chip companies including leading aerospace companies, automotive suppliers and metal service centers. In our served markets, we seek to be the supplier of choice by pursuing "Best in Class" customer satisfaction driven by quality, availability, service and delivery performance. We further seek to differentiate ourselves by offering a broad product portfolio including our KaiserSelect® products, which are engineered and manufactured to deliver enhanced product characteristics with improved consistency, so as to result in better performance, lower waste and, in many cases, lower production cost for our customers.
We have a culture of continuous improvement that is facilitated by the Kaiser Production System ("KPS"), an integrated application of tools such as Lean Manufacturing, Six Sigma and Total Productive Manufacturing. We believe KPS enables us to continuously reduce our own manufacturing costs and eliminate waste throughout the value chain. We strive to tightly integrate the management of the operations within our Fabricated Products segment across multiple production facilities, product lines and target markets in order to maximize the efficiency of product flow to our customers.
In recent years, we have pursued significant capital spending initiatives to expand manufacturing capabilities, increase capacity, improve efficiency and enhance product quality. The most significant of these initiatives was a series of investments that more than doubled our capacity and expanded our manufacturing capability to produce thick heat treat plate at our Spokane, Washington ("Trentwood") facility in order to capitalize on significant demand growth for aerospace applications. We recently commenced a multi-year, $150.0 million capital investment project at our Trentwood facility focused on equipment upgrades throughout the process flow to reduce conversion costs and increase efficiency, further improving our competitive cost position on all products produced at Trentwood. A significant portion of the investment will be focused on modernizing the legacy equipment and process flow for thin gauge plate to achieve KaiserSelect® quality enhancements for both aerospace and general engineering applications. The investments will also result in further expansion of Trentwood’s manufacturing capacity. Additionally, we have invested to support sizable growth in demand for automotive applications by upgrading existing extrusion presses at each of our automotive focused extrusion facilities to enhance capabilities and by adding new extrusion press capacity within our automotive manufacturing platform.
Kaiser Aluminum was founded by Henry J. Kaiser in 1946 with the lease and eventual purchase of three aluminum facilities from the United States Government. Over the ensuing decades, Kaiser Aluminum grew to become a fully-integrated aluminum company involved in virtually all aspects of the aluminum industry, including the mining and refining of bauxite into alumina, the production of primary aluminum from alumina, and the manufacture of fabricated and semi-fabricated aluminum products. From 2000 to 2010, as a result of a strategic reassessment of our competitive positions in the upstream and downstream portions of the aluminum industry, we divested or closed our non-strategic bauxite mining, alumina refining, and primary aluminum operations and focused on downstream operations where we had a competitive advantage. Following this restructuring of our business operations, we no longer participate in commodity segments within the aluminum industry and focus solely on the production of semi-fabricated specialty aluminum products for major suppliers and manufacturers for applications in our chosen Aero/HS, Automotive Extrusions, GE and other end-markets.
Business Operations
Consistent with the manner in which our chief operating decision maker reviews and evaluates our business, our Fabricated Products business is treated as a single operating segment. In addition to the Fabricated Products segment, we have one business unit, All Other, which provides general and administrative support for our operations. For purposes of segment reporting under United States generally accepted accounting principles ("GAAP"), we treat the Fabricated Products segment as its own reportable segment. All Other is not considered a reportable segment.
Fabricated Products Segment
Overview
Our Fabricated Products segment focuses on producing rolled, extruded and drawn aluminum products used principally for aerospace and defense, automotive, consumer durables, electronics, electrical and machinery and equipment applications. During 2015, 2014 and 2013, our North American manufacturing facilities produced and shipped approximately 615.4 million, 588.8 million and 563.7 million pounds of fabricated aluminum products, respectively, which accounted for all of our total net sales.
For information regarding net sales, operating (loss) income and total assets of the Fabricated Products segment, see Note 13 of Notes to Consolidated Financial Statements included in this Report; such information is incorporated herein by reference.

2



The table below provides shipment and sales information (in millions of dollars except for shipment information and percentages) for our end market applications:
 
 
Year Ended
December 31,
 
 
2015
 
2014
 
2013
Shipments (mm lbs):
 
 
 
 
 
 
 
 
 
 
 
 
Aero/HS products
 
243.5

 
40
%
 
236.9

 
40
%
 
224.3

 
40
%
Automotive Extrusions
 
93.5

 
15
%
 
78.5

 
13
%
 
64.1

 
11
%
GE products
 
231.4

 
38
%
 
223.4

 
38
%
 
222.5

 
40
%
Other products
 
47.0

 
7
%
 
50.0

 
9
%
 
52.8

 
9
%
 
 
615.4

 
100
%
 
588.8

 
100
%
 
563.7

 
100
%
Sales:
 
 
 
 
 
 
 
 
 
 
 
 
Aero/HS products
 
$
695.5

 
50
%
 
$
686.3

 
51
%
 
$
677.0

 
52
%
Automotive Extrusions
 
199.2

 
14
%
 
173.5

 
13
%
 
129.5

 
10
%
GE products
 
426.1

 
31
%
 
419.5

 
31
%
 
411.0

 
32
%
Other products
 
71.1

 
5
%
 
76.8

 
5
%
 
80.0

 
6
%
 
 
$
1,391.9

 
100
%
 
$
1,356.1

 
100
%
 
$
1,297.5

 
100
%
Aero/HS Products. Our Aero/HS products include high quality heat treat plate and sheet, as well as cold finish rod and bar, seamless drawn tube, hard alloy extrusions and billet that are manufactured to demanding specifications for the global aerospace and defense industries. These industries use our products in applications that demand such properties as high tensile strength, superior fatigue resistance and exceptional durability even in harsh environments. For instance, aerospace manufacturers use high-strength 2000- and 7000-series alloys for a variety of structures that must perform consistently under extreme variations in temperature and altitude. Our Aero/HS products are used for a wide variety of end uses. We make aluminum plate, sheet, extruded shapes and tube for aerospace applications and we manufacture a variety of specialized rod and bar products that are incorporated in diverse applications. The aerospace and defense industries' consumption of fabricated aluminum products is driven by factors that include overall levels of airframe build rates, the mix of aircraft models being built and defense spending, as well as the usage of competing materials such as titanium and composites. Demand has increased for thick plate with growth in monolithic construction of commercial and other aircraft. In monolithic construction, aluminum plate is heavily machined to form the desired part from a single piece of metal (as opposed to creating parts using aluminum sheet, extrusions or forgings that are affixed to one another using rivets, bolts or welds).
Automotive Extrusions. Automotive Extrusions consist of extruded aluminum products for many North American automotive applications. Examples of the variety of extruded products that we supply to the automotive industry include extruded products for the body-in-white structural components, bumper systems, anti-lock braking systems and drawn tube for drive shafts. For some Automotive Extrusions, we perform limited fabrication, including sawing and cutting to length. Demand for Automotive Extrusions is determined based upon automotive build rates in North America and increasing aluminum content. As automotive manufacturers continue to reduce the weight of vehicles to achieve greater fuel efficiency and comply with stringent federal regulations, applications historically made from steel are being converted to aluminum, which has the required mechanical properties but at a much lighter weight.
GE Products. Our GE products consist primarily of 6000-series alloy plate, sheet, rod, bar, tube, wire and standard extrusions. The 6000-series alloy is an extrudable medium-strength alloy that is heat treatable and extremely versatile. Our GE products have a wide range of uses and applications, many of which involve further fabrication for numerous transportation and other industrial end market applications where machining of plate, rod and bar is intensive. For example, our GE products are used in the enhancement and production of military vehicles, ordnances, semiconductor manufacturing cells, numerous electronic devices, after-market motor sport parts and tooling plates. Our rod and bar products are manufactured into rivets, nails, screws, bolts and parts for machinery and equipment. Demand growth and cyclicality for GE products tend to mirror broad economic patterns and industrial activity in North America. Demand is also impacted by the destocking and restocking of inventory throughout the supply chain.
Other Products. Other products consist of extruded, drawn and cast billet aluminum products for a variety of North American industrial end uses. Demand for Other products tends to mirror broad economic patterns and industrial activity in North America.

3



Types of Manufacturing Processes Employed
We utilize the following manufacturing processes to produce our fabricated products:
Flat Rolling. The traditional manufacturing process for aluminum flat-rolled products uses ingot, a large rectangular slab of aluminum, as the starter material. The ingot is processed through a series of rolling operations, both hot and cold. Finishing steps may include heat treatment, annealing, stretching, leveling or slitting to achieve the desired metallurgical, dimensional and/or performance characteristics. Aluminum flat-rolled products are manufactured using a variety of alloys, a range of tempers (hardness), gauges (thickness) and widths and various finishes. Flat-rolled aluminum semi-finished products are generally either sheet (under 0.25 inches in thickness) or plate (0.25 inches or greater in thickness). The vast majority of the North American market for aluminum flat-rolled products uses "common alloy" plate and sheet for construction, beverage/food can and other applications. We have focused our efforts on "heat treat" products, which are distinguished from common alloy products by higher strength and other desired product attributes. The primary end market applications of flat-rolled heat treat plate and sheet are for Aero/HS and GE products.
Extrusion. The extrusion process typically starts with a cast billet, which is an aluminum cylinder of varying length and diameter. The first step in the process is to heat the billet to an elevated temperature whereby the metal is malleable. The billet is put into an extrusion press and pushed, or extruded, through a die that gives the material the desired two-dimensional cross section. The material is either quenched as it leaves the press, or subjected to a post-extrusion heat treatment cycle, to control the material’s physical properties. The extrusion is then straightened typically by stretching and cutting to length before being hardened in aging ovens. The largest end market applications for extruded products are in the construction, general engineering and custom products. Building and construction products represent the single largest end market application for extrusions by a significant amount. However, we have strategically chosen to focus on Aero/HS products, Automotive Extrusions, GE products and Other products, utilizing our well-developed technical expertise, strong production capability and high product quality to meet the requirements of these more demanding applications.
Drawing. Drawing is a fabrication operation in which extruded tubes and rods are pulled through a die, or drawn. The primary purpose of drawing is to reduce the diameter and wall thickness while improving physical properties and dimensions. Material may go through multiple drawing steps to achieve the final dimensional specifications. We use drawing in connection with certain of our Aero/HS and Automotive Extrusion products.
A description of the manufacturing processes and category of products at each of our production facilities at December 31, 2015 is shown below:
Location
 
Types of Products
 
Manufacturing Process
Chandler, Arizona (Extrusion)
 
Aero/HS
 
Extrusion
Chandler, Arizona (Tube)
 
Aero/HS
 
Extrusion/Drawing
Florence, Alabama
 
Aero/HS, GE, Other
 
Drawing
Jackson, Tennessee
 
Aero/HS, Auto, GE
 
Extrusion/Drawing
Kalamazoo, Michigan
 
Auto, GE
 
Extrusion
London, Ontario (Canada)
 
Auto
 
Extrusion
Los Angeles, California
 
GE, Other
 
Extrusion
Newark, Ohio
 
Aero/HS, GE
 
Extrusion/Rod Rolling
Richland, Washington
 
GE
 
Extrusion
Richmond, Virginia (Bellwood)
 
Auto, GE
 
Extrusion/Drawing
Sherman, Texas
 
Auto, GE, Other
 
Extrusion
Spokane, Washington (Trentwood)
 
Aero/HS, GE
 
Flat Rolling
As reflected by the table above, many of our facilities employ the same basic manufacturing process and produce the same types of products. We make a significant effort to tightly integrate the management of our Fabricated Products segment across multiple manufacturing locations, product lines and end market applications to maximize the efficiency of product flow to customers. We centralize purchasing of our primary aluminum requirements in order to better manage price, credit and other benefits. Our sales force and the management thereof are also significantly integrated as many customers purchase a number of different products that are produced at different plant facilities. We believe that integration of our operations allows us to capture efficiencies while allowing our facilities to remain highly focused on their specific processes and end market applications.

4



Raw Materials
To make our fabricated products, we purchase primary aluminum and recycled and secondary scrap aluminum from third party suppliers in varying percentages depending on various market factors, including price and availability. The price for primary aluminum purchased for the Fabricated Products segment is typically based on the Average Midwest Transaction Price ("Midwest Price"), which reflects the primary aluminum supply/demand dynamics in North America. Recycled and scrap aluminum is typically purchased at a discount to ingot prices but can require additional processing. The average Midwest Price, comprised of the average London Metal Exchange ("LME") plus average Midwest premium, per pound of primary aluminum for 2015, 2014 and 2013, were $0.75 + $0.13, $0.85 + $0.20 and $0.84 + $0.11, respectively. At February 12, 2016, the LME plus Midwest premium transaction price per pound was $0.68 + $0.09.
In addition to producing fabricated aluminum products for sale to third parties, certain of our production facilities provide one another with billet, log, or other intermediate material for further production in lieu of purchasing such items from third-party suppliers. For example, our Newark, Ohio facility supplies billet and log to the Jackson, Tennessee facility and redraw rod to the Florence, Alabama facility.
Pricing, Metal Price Risk Management and Hedging
As noted above, we purchase primary and secondary aluminum, our principal raw material, on a floating price basis typically based on the Midwest Price. Our pricing of fabricated aluminum products is generally intended to lock in a conversion margin (representing the value added from the fabrication process(es)) and to pass metal price fluctuation through to our customers. We manage the risk of fluctuations in the price of aluminum through our pricing policies and use of financial derivatives. Our three principal pricing mechanisms are as follows:
Spot price. Some of our customers pay a product price that incorporates the spot price of primary aluminum (LME plus Midwest premium) in effect at the time of shipment to a customer. Spot prices for these products change regularly based on competitive dynamics. Fluctuation in the underlying aluminum price is a significant factor influencing changes in competitive spot prices. This pricing mechanism typically allows us to pass metal price risk through to the customers. For some of our higher value added products sold on a spot basis, the pass through of metal price movements can sometimes lag by as much as several months, with a favorable impact to us when metal prices decline and an adverse impact to us when metal prices increase. We, from time to time, enter into hedging transactions with third parties to minimize the impact to us of metal price swings for these higher value added products.
Index-based price. Some of our customers pay a product price that incorporates an index-based price for primary aluminum, such as Platt’s Midwest price for primary aluminum. This pricing mechanism also typically allows us to pass metal price risk through to the customer.
Firm price. Some of our customers who commit to volumes and timing of delivery pay a firm price, creating metal price risk that we must hedge. We are able to limit exposure to metal price risks created by firm-price customer sales contracts by using third-party hedging instruments. Total fabricated product shipments for which we were subject to price risk were, in millions of pounds, 204.6, 138.3 and 119.8 during 2015, 2014 and 2013, respectively.
All hedging activities are managed centrally to minimize transaction costs, monitor consolidated net exposures and allow for increased responsiveness to changes in market factors. Hedging activities are conducted in compliance with a policy approved by our Board of Directors and administered by our hedging committee (members of which include our principal executive officer, principal financial officer and principal accounting officer).
Sales, Marketing and Distribution
Industry sales margins for fabricated products fluctuate in response to competitive and market dynamics. Sales are made directly to customers by our sales personnel located in the United States, Canada, Europe and China and by independent sales agents in other regions of Asia, Latin America and the Middle East. Our sales and marketing efforts are focused on the markets for Aero/HS products, Automotive Extrusions, GE products and Other products.
Aero/HS Products. Approximately 49% of our Aero/HS product shipments are sold to metal service centers with the remainder sold directly to end market customers. Sales are made primarily under contracts (with terms spanning from one year to ten years) as well as on an order-by-order basis. We serve this market with a North American sales force focused on Aero/HS and GE products and direct sales representatives in Western Europe and China.
Automotive Extrusions. Our Automotive Extrusions are sold primarily to first tier automotive suppliers under multi-year sales agreements. Almost all sales of Automotive Extrusions occur through direct channels using a North American direct sales force that works closely with our technical sales support organization.

5



GE Products. A majority of our GE products are sold to large metal service centers in North America on an order-by-order basis, with orders primarily consisting of standard catalog type items shipped with a relatively short lead-time. We service this market with a North American sales force focused on GE and Aero/HS products.
Other Products. Other products are primarily sold directly to industrial end users on an order-by-order basis using a North American direct sales force.
Customers
In 2015, our Fabricated Products segment had approximately 800 customers. Our two largest customers, Reliance Steel & Aluminum Co. ("Reliance") and The Boeing Company ("Boeing"), accounted for approximately 25% and 10%, respectively, of our net sales in 2015. While the loss of Reliance or Boeing as customers could have a material adverse effect on us, we believe that our long-standing relationship with each is good and that the risk of losing either as a customer is remote. See Note 13 of Notes to Consolidated Financial Statements included in this Report for information about our significant concentrations, which information is incorporated herein by reference.
Research and Development
We operate three research and development centers. Our Rolling and Heat Treat Center and our Metallurgical Analysis Center are both located at our Trentwood facility. The Rolling and Heat Treat Center has complete hot rolling, cold rolling and heat treat capabilities to simulate, in small lots, processing of flat-rolled products for process and product development on an experimental scale. The Metallurgical Analysis Center consists of a full metallographic laboratory and a scanning electron microscope to support research development programs as well as respond to plant technical service requests. The third center, our Solidification and Casting Center, is located in Newark, Ohio and has a developmental casting unit capable of casting billets and ingots for extrusion and rolling experiments. The casting unit is also capable of casting full size billets and ingots for processing on the production extrusion presses and rolling mills. See Note 1 of Notes to Consolidated Financial Statements included in this Report for information about our research and development costs, which information is incorporated herein by reference.
A significant amount of our research and development is devoted to product and process development within our production operations, largely focused on controlling the manufacturing process to improve product quality, ensure consistency and enhance one or more specific product attributes. This has resulted in the creation and delivery of our highly differentiated KaiserSelect® products, which are engineered and manufactured to deliver enhanced product characteristics with improved consistency, which results in such benefits as better performance, lower waste and, in many cases, lower production cost for our customers.
All Other
All Other provides general and administrative support to our operations. The expenses incurred in this business unit are not allocated to our other operations. All Other is not considered a reportable segment.
Segment and Geographical Area Financial Information
The information set forth in Note 13 of Notes to Consolidated Financial Statements included in this Report regarding our GAAP reporting segment and the geographical areas in which we operate is incorporated herein by reference.
Competition
The fabricated aluminum industry is highly competitive. We focus our fabricating operations on technically challenging applications for flat-rolled heat treat plate and sheet and extruded/drawn products that allow us to apply our core metallurgical and process technology capabilities to produce highly engineered products with differentiated characteristics. We further differentiate ourselves from our competitors by pursuing "Best in Class" customer satisfaction, which is driven by quality, availability, service and delivery performance and having a broad product offering.
Our primary competitors in the global market for Aero/HS products are Alcoa Inc., Constellium N.V. and Aleris Corporation. Our primary competitors in the market for GE products are Alcoa, Inc., Sapa AS, and in markets for certain GE products, we compete with imports and regional participants. We compete with Alcoa, Inc. and Sapa AS, along with other regional participants, in the market for Automotive Extrusions. Some of our competitors are substantially larger, have greater financial resources and may have other strategic advantages.
For heat treat plate and sheet products, particularly for aerospace applications, new competition is limited by technological expertise that only a few companies have developed through significant investment in research and development and decades of

6



operating experience. Further, use of plate and sheet in safety critical applications makes quality and product consistency critical factors. Suppliers must pass a rigorous qualification process to sell to airframe manufacturers. Additionally, significant investment in infrastructure and specialized equipment is required to supply heat treat plate and sheet.
Employees
At December 31, 2015, we employed approximately 2,790 people, of which approximately 2,730 were employed in our Fabricated Products segment and approximately 60 were employed in our corporate group, most of whom are located in our office in Foothill Ranch, California.
The table below shows each manufacturing location, the primary union affiliation, if any, and the expiration date for the current union contracts as of December 31, 2015. As indicated below, union affiliations are with the United Steel, Paper and Forestry, Rubber, Manufacturing, Energy, Allied Industrial and Service Workers International Union, AFL-CIO, CLC ("USW"), International Association of Machinists ("IAM") and International Brotherhood of Teamsters ("Teamsters"). See Note 1 of Notes to Consolidated Financial Statements in this Report for additional information about concentration of labor subject to collective bargaining agreements.
 
 
 
 
Contract
Location
 
Union
 
Expiration Date
Chandler, Arizona (Extrusion)
 
Non-union
 
Chandler, Arizona (Tube)
 
USW
 
Apr 2018
Florence, Alabama
 
USW
 
Mar 2017
Jackson, Tennessee
 
Non-union
 
Kalamazoo, Michigan
 
USW
 
Feb 20161
London, Ontario (Canada)
 
USW Canada
 
Feb 2018
Los Angeles, California
 
Teamsters
 
Apr 2018
Newark, Ohio
 
USW
 
Sep 2020
Richland, Washington
 
Non-union
 
Richmond, Virginia (Bellwood)
 
USW/IAM
 
Nov 2017/Nov 2017
Sherman, Texas
 
IAM
 
Dec 2016
Spokane, Washington (Trentwood)2
 
USW
 
Sep 2020
_________________________
1. 
We are currently in the process of negotiating the labor agreement covering employees at our Kalamazoo, Michigan facility. We consider our relationship with our employees to be good.
2. 
There are two labor agreements with the USW covering employees at the Trentwood facility. One agreement covers the majority of the employees at the facility as well as our Newark, Ohio facility. The other agreement covers employees working at a leased site near the Trentwood rolling mill complex. In January 2015, both agreements were extended through September 30, 2020.
Environmental Matters
We are subject to a number of environmental laws and regulations, to potential fines or penalties assessed for alleged breaches of the environmental laws and regulations and to potential claims and litigation based upon such laws and regulations.
We have established procedures for regularly evaluating environmental loss contingencies. Our environmental accruals represent our undiscounted estimate of costs reasonably expected to be incurred based on presently enacted laws and regulations, existing requirements, currently available facts, existing technology and our assessment of the likely remediation actions to be taken. See Note 9 of Notes to Consolidated Financial Statements included in this Report.
Legal Structure
Our current corporate structure is summarized as follows:
We directly own 100% of the issued and outstanding shares of capital stock of Kaiser Aluminum Investments Company, a Delaware corporation ("KAIC"), which functions as an intermediate holding company.

7



We directly own 100% of the ownership interest in Kaiser Aluminum Beijing Trading Company, which was formed in China for the primary purpose of engaging in market development and commercialization and distribution of our products in Asia.
KAIC owns 100% of the ownership interests of each of:
Kaiser Aluminum Fabricated Products, LLC, a Delaware limited liability company ("KAFP"), which directly holds the assets and liabilities associated with our Fabricated Products segment (excluding those assets and liabilities associated with our London, Ontario and Chandler, Arizona (Extrusion) facilities and certain of the assets and liabilities associated with our Fabricated Products segment’s operations in the State of Washington) and owns 100% of the ownership interest of each of:
Kaiser Aluminum Washington, LLC, a Delaware limited liability company, which holds certain of the assets and liabilities associated with our Fabricated Products segment’s operations in the State of Washington; and
Kaiser Aluminum Alexco, LLC, a Delaware limited liability company, which holds the assets and liabilities associated with our Chandler, Arizona (Extrusion) facility;
Kaiser Aluminum Canada Limited, an Ontario corporation, which holds the assets and liabilities associated with our London, Ontario facility;
Kaiser Aluminum Mill Products, Inc., a Delaware corporation, which engages in market development and commercialization and distribution of our products in the United Kingdom.
Trochus Insurance Co., Ltd., a corporation formed in Bermuda, which has historically functioned as a captive insurance company;
Kaiser Aluminum France, SAS, a corporation formed in France for the primary purpose of engaging in market development and commercialization and distribution of our products in Europe; and
DCO Management, LLC, a Delaware limited liability company, which, as a successor by merger to Kaiser Aluminum & Chemical Corporation, holds our remaining non-operating assets and liabilities.
Item 1A. Risk Factors
This Item may contain statements which constitute "forward-looking statements" within the meaning of the Private Securities Litigation Reform Act of 1995. See Item 1. "Business Forward-Looking Statements" for cautionary information with respect to such forward-looking statements. Such cautionary information should be read as applying to all forward-looking statements wherever they appear in this Report. Forward-looking statements are not guarantees of future performance and involve significant risks and uncertainties. Actual results may vary from those in forward-looking statements as a result of a number of factors including those we discuss in this Item and elsewhere in this Report. In addition to the factors discussed elsewhere in this Report, the risks described below are those that we believe are material to our company. The occurrence of any of the events discussed below could significantly and adversely affect our business, prospects, financial position, results of operations and cash flows as well as the trading price of our common stock.
We have experienced and continue to experience the effects of global economic uncertainty.
The global economy experiences periods of uncertainty that can have wide-ranging effects, including:
disruption in global financial markets that has at times reduced the liquidity available to us, our customers, our suppliers and the purchasers of products that materially affect demand for our products, including commercial airlines;
a weakened global banking and financial system that creates ongoing risk and exposure to the impact of non-performance by banks committed to provide financing, hedging counterparties, insurers, customers and suppliers;
volatility in commodity prices that potentially could result in substantial non-cash charges as we adjust inventory values and mark our commodity hedge positions to market and that potentially could also adversely affect our liquidity by creating cash margin requirements on our commodity hedge positions and by reducing the value of our inventories and borrowing base under our revolving credit facility;
our inability to achieve the level of growth, integration or other benefits anticipated from our strategic investments;
fluctuations in our costs, including the cost of energy, raw materials and freight, which we may not be able to pass entirely through to our customers;

8



substantial fluctuations in consumer spending that have at times reduced the demand for some applications that use our products;
destocking and restocking of inventory levels throughout the supply chain for certain of our products;
pressure to reduce defense spending, which reductions could affect demand for our products used in defense applications, as the U.S. and foreign governments are faced with competing national priorities;
the inability to predict with any certainty the success or failure of efforts to reduce government deficit spending or the scope, nature or effect of such efforts; and
rapidly changing oil prices, which could impact the demand of our products, especially in aerospace/high strength and automotive applications.
We are unable to predict the impact, severity and duration of these effects, any of which could have a material adverse impact on our financial position, results of operations and cash flows.
We operate in a highly competitive industry.
The fabricated products segment of the aluminum industry is highly competitive. Competition in the sale of fabricated aluminum products is based upon quality, availability, price, customer service and delivery performance. Many of our competitors are substantially larger than we are and have greater financial resources than we do and may have other strategic advantages, including more efficient technologies or lower or more stable raw material costs. Our facilities are located in North America. To the extent that our competitors have or develop production facilities located outside North America, they may be able to produce similar products at a lower cost and sell those products at a lower price. Additionally, foreign price competition could increase during periods when currency exchange rates favor foreign competition or as a result of dumping those products in North America in violation of existing trade laws. We may not be able to adequately reduce our costs or prices to compete with these products. Increased competition could cause a reduction in our shipment volumes and product pricing or increase our expenditures, any one of which could have a material adverse effect on our financial position, results of operations and cash flows.
We depend on a core group of significant customers.
In 2015, our largest fabricated products customers, Reliance and Boeing, accounted for approximately 25% and 10%, respectively, of our net sales in 2015 and our five largest customers in total accounted for approximately 49% of our fabricated products net sales. If our existing relationships with significant customers materially deteriorate or are terminated and we are not successful in replacing lost business, our financial position, results of operations and cash flows could be materially and adversely affected. In addition, a prolonged or increasing downturn in the business or financial position of any of our significant customers could cause any one or more of them to limit purchases to contractual minimum volumes, seek relief from contractual minimums or breach those obligations, all of which could materially and adversely affect our financial position, results of operations and cash flows.
Our industry is very sensitive to foreign economic, regulatory and political factors that may adversely affect our business.
We import primary aluminum from, and manufacture fabricated products used in, foreign countries. Factors in the politically and economically diverse countries in which we operate or have customers or suppliers, including inflation, fluctuations in currency and interest rates, availability of financial capital, competitive factors, civil unrest and labor problems, could affect our financial position, results of operations and cash flows. Our financial position, results of operations and cash flows could also be adversely affected by:
acts of war or terrorism or the threat of war or terrorism;
government regulation in the countries in which we operate, service customers or purchase raw materials;
the implementation of controls on imports, exports or prices;
the adoption of new forms of taxation and duties;
new forms of emission controls and tax, commonly known as "cap and trade";
increasing medical benefit costs and the potential impact of the excise tax contemplated by the Affordable Care Act;
the imposition of currency restrictions;
the nationalization or appropriation of rights or other assets; and
trade disputes involving countries in which we operate, service customers or purchase raw materials.

9



The commercial aerospace industry is cyclical and downturns in the commercial aerospace industry could adversely affect our business.
We derive a significant portion of our revenue from products sold to the aerospace industry, which can be highly cyclical. The aerospace industry is historically driven by the demand for new commercial aircraft. Demand for commercial aircraft is influenced by trends in airline passenger traffic and increasing global travel, normal replacement of older aircraft, replacement of fuel inefficient aircraft, airline industry profitability, the state of the U.S. and global economies, concerns regarding terrorism or the threat of terrorism, concerns regarding pandemics of infectious disease, safety concerns with newly introduced aircraft, and numerous other factors, any of which could result in a sharp decrease globally in new commercial aircraft deliveries and order cancellations or deferrals by the major airlines. Despite existing backlogs, any one or more of these influencing factors may lead to reduced demand for new aircraft that utilize our products, which could adversely affect our financial position, results of operations and cash flows.
Reductions in defense spending for aerospace and non-aerospace military applications could substantially reduce demand for our products.
Our products are used in a wide variety of military applications, including military aircraft, armored vehicles and ordnance. The funding of U.S. government programs is subject to congressional appropriations. Many of the programs in which we participate may extend several years; however, these programs are normally funded annually. Changes in military strategy and priorities may affect current and future programs. With significant pressure to reduce defense spending as the U.S. and foreign governments are faced with competing national priorities, reductions in defense spending could reduce the demand for our products and could adversely affect our financial position, results of operations and cash flows.
Our customers may reduce their demand for aluminum products in favor of alternative materials.
Our fabricated aluminum products compete with products made from other materials, such as steel, titanium and composites, for various applications. For instance, the commercial aerospace industry has used and continues to evaluate the further use of alternative materials to aluminum, such as titanium and composites, in order to reduce the weight and increase the fuel efficiency of aircraft. Additionally, the automotive industry, while motivated to reduce vehicle weight with the use of aluminum, may revert to steel or other materials for certain applications. The willingness of customers to accept other materials in lieu of aluminum could adversely affect the demand for our products, particularly our Aero/HS products and Automotive Extrusions, and thus adversely affect our financial position, results of operations and cash flows.
Downturns in the automotive and ground transportation industries could adversely affect our business.
The demand for our Automotive Extrusions and many of our general engineering and other industrial products is dependent on the production of cars, light trucks, SUVs and heavy duty vehicles and trailers in North America. The automotive industry is highly cyclical, as new vehicle demand is dependent on consumer spending and is tied closely to the overall strength of the North American economy. Even with the automotive industry’s growing use of aluminum in light-weighting vehicles, weak demand for, or lower production of, new cars, light trucks, SUVs and heavy duty vehicles and trailers, particularly by U.S. manufacturers, could adversely affect the demand for our products and have a material adverse effect on our financial position, results of operations and cash flows.
Changes in consumer demand for particular motor vehicles could adversely affect our business.
Sensitivity to fuel prices and consumer preferences can influence consumer demand for motor vehicles that have a higher content of the aluminum Automotive Extrusions that we supply. The loss of business with respect to, or a lack of commercial success of, one or more particular vehicle models for which we are a significant supplier could have an adverse impact on our financial position, results of operations and cash flows.
We may experience difficulties in the launch or production ramp-up of new products which could adversely affect our business.
To effectively compete in the aluminum supply industry, we must be able to launch new products to meet our customers' demand in a timely manner. We may experience difficulties, including manufacturing disruptions, delays or other complications, as we ramp up manufacturing processes for newly introduced products, which could adversely impact our ability to serve our customers, our reputation or our costs of production.

10



We face pressure from our customers on pricing.
Cost cutting initiatives that many of our customers have adopted generally result in downward pressure on pricing. If we are unable to generate sufficient production cost savings in the future to offset price reductions, our financial position, results of operations and cash flows could be adversely impacted.
Reductions in demand for our products may be more severe than, and may occur prior to, reductions in demand for our customers’ products.
Customers purchasing our fabricated aluminum products, especially those in the cyclical aerospace industry, generally require significant lead time in the production of their own products. Therefore, demand for our products may increase prior to demand for our customers’ products. Conversely, demand for our products may decrease as our customers anticipate a downturn in their respective businesses. As demand for our customers’ products begins to soften, our customers typically meet the reduced demand for their products using their existing inventory without replenishing the inventory, which results in a reduction in demand for our products greater than the reduction in demand for their products. Further, the reduction in demand for our products can be exacerbated if inventory levels held by our customers exceed normal levels, due to production delays of specific commercial airframe models, prior purchases by our customers of our products under sales contracts at committed volumes that exceed the actual needs of our customers or for other reasons. This amplified reduction in demand for our products while our customers consume their inventory to meet their business needs (destocking) may adversely affect our financial position, results of operations and cash flows.
Our business is subject to unplanned business interruptions which may adversely affect our business.
The production of fabricated aluminum products and aluminum is subject to unplanned events such as explosions, fires, inclement weather, natural disasters, accidents, labor disruptions, transportation interruptions and supply interruptions. Operational interruptions at one or more of our production facilities, particularly interruptions at our Trentwood facility where our production of plate and sheet is concentrated, could cause substantial losses in our production capacity. Furthermore, because customers may be dependent on planned deliveries from us, customers that have to reschedule their own production due to our delivery delays may be able to pursue financial claims against us and we may incur costs to correct such problems in addition to any liability resulting from such claims. Interruptions may also harm our reputation among actual and potential customers, potentially resulting in a loss of business. To the extent these losses are not covered by insurance, our financial position, results of operations and cash flows may be adversely affected by such events.
We may not be able to successfully implement our productivity enhancement and cost reduction initiatives.
As the economy and markets for our products move through economic downturns or supply otherwise begins to exceed demand through increases in capacity or reduced demand, it is increasingly important for us to be a low cost producer. Although we have undertaken and expect to continue to undertake productivity enhancement and cost reduction initiatives to improve performance, including deployment of company-wide business improvement methodologies, such as our Kaiser Production System, which involves the integrated application of continuous improvement tools such as Lean Manufacturing, Six Sigma and Total Productive Manufacturing, we cannot assure you that all of these initiatives will be completed or beneficial to us or that any estimated cost saving from such activities will be fully realized. Even when we are able to generate new efficiencies successfully in the short-to-medium term, we may not be able to continue to reduce cost and increase productivity over the long term.
Our business could be adversely affected by increases in the cost of aluminum.
The price of primary aluminum has historically been subject to significant cyclical price fluctuations and the timing of changes in the market price of aluminum is largely unpredictable. Although our pricing of fabricated aluminum products is generally intended to pass the risk of price fluctuations on to our customers, we may not be able to pass on the entire cost of increases to our customers and there can be a potential time lag on certain high value added products between increases in costs for aluminum and the point when we can implement a corresponding increase in price to our customers. As a result, we may be exposed to fluctuations in the costs for aluminum since, during the time lag, we may have to bear the additional cost increase. If these events were to occur, they could have a material adverse effect on our financial position, results of operations and cash flows. In addition, increases in aluminum costs may cause some of our customers to substitute other materials for our products over time, adversely affecting our financial position, results of operations and cash flows due to a decrease in the sales of fabricated aluminum products.

11



Our investment and other expansion projects may not be completed or start up as scheduled.
Our ability to complete our investment and expansion projects and the timing and costs of doing so are subject to various risks associated with all major construction projects, many of which are beyond our control, including technical or mechanical problems and economic conditions. Additionally, the start-up of operations after such projects have been completed can be complicated and costly. If we are unable to fully complete these projects, if the actual costs for these projects exceed our expectations, or if the start-up phase after completion is more complicated than anticipated, our financial position, results of operations and cash flows could be adversely affected.
Covenants and events of default in our debt instruments could limit our ability to undertake certain types of transactions and adversely affect our liquidity.
Our revolving credit facility and the indenture governing our 8.25% Senior Notes due 2020 ("Senior Notes") contain a number of restrictive covenants that impose operating and financial restrictions on us and may limit our ability to engage in acts that may be in our long-term best interest, including restrictions on our ability to:
incur additional indebtedness and guarantee indebtedness;
pay dividends or make other distributions or repurchase or redeem capital stock;
prepay, redeem or repurchase certain debt;
issue certain preferred stock or similar equity securities;
make loans and investments;
sell assets;
incur liens;
enter into transactions with affiliates;
alter the businesses we conduct;
enter into agreements restricting our subsidiaries' ability to pay dividends; and
consolidate, merge or sell all or substantially all of our assets.
In addition, restrictive covenants in our revolving credit facility require us in certain circumstances to maintain specified financial ratios and satisfy other financial condition tests. Our ability to meet those financial ratios and tests can be affected by events beyond our control and we may be unable to meet them.
A breach of the covenants or restrictions under our revolving credit facility or under the indenture governing the Senior Notes could result in an event of default under the applicable indebtedness. Such a default may allow the creditors to accelerate the related debt. A payment default or an acceleration following an event of default under our revolving credit facility or our indenture for our Senior Notes could trigger an event of default under the other indebtedness obligation as well as any other debt to which a cross-acceleration or cross-default provision applies, which could result in the principal of and the accrued and unpaid interest on all such debt becoming due and payable. In addition, an event of default under our revolving credit facility could permit the lenders under our revolving credit facility to terminate all commitments to extend further credit under that facility. Furthermore, if we were unable to repay any amounts due and payable under our revolving credit facility, those lenders could proceed against the collateral granted to them to secure that indebtedness. In the event our lenders or noteholders accelerate the repayment of our borrowings, we and our subsidiaries may not have sufficient assets to repay that indebtedness. As a result of these restrictions, we may be:
limited in how we conduct our business and grow in accordance with our strategy;
unable to raise additional debt or equity financing to operate during general economic or business downturns; or
unable to compete effectively or to take advantage of new business opportunities.
In addition, our financial results, our level of indebtedness and our credit ratings could adversely affect the availability and terms of any additional or replacement financing.
More detailed descriptions of our revolving credit facility and the indenture governing our Senior Notes are included in filings made by us with the Securities and Exchange Commission, along with the documents themselves, which provide the full text of these covenants.

12



Restrictive covenants in our debt instruments contain significant qualifications and exceptions.
While our revolving credit facility and the indenture governing the Senior Notes place limitations on our ability to pay dividends or make other distributions, repurchase or redeem capital stock and make loans and investments, investors should be aware that these limitations are subject to significant qualifications and exceptions. The aggregate amount of payments made in compliance with these limitations could be substantial.
As indicated above, more detailed descriptions of our revolving credit facility and the indenture governing our Senior Notes are included in filings made by us with the Securities and Exchange Commission, along with the documents themselves, which provide the full text of these covenants.
Servicing our debt requires a significant amount of cash and we may not have sufficient cash flow from our business to pay our debt.
Our ability to make scheduled payments of the principal of, to pay interest on or to refinance our debt obligations depends on our financial condition and operating performance, which are subject to prevailing economic and competitive conditions and to certain financial, business, legislative, regulatory and other factors beyond our control. We may be unable to maintain a level of cash flows from operating activities sufficient to permit us to pay the principal, premium, if any and interest on our indebtedness.
If our cash flows and capital resources are insufficient to fund our debt service obligations, we could face substantial liquidity problems and could be forced to reduce or delay investments and capital expenditures or to dispose of material assets or operations, seek additional debt or equity capital or restructure or refinance our indebtedness. We may not be able to effect any such alternative measures, if necessary, on commercially reasonable terms or at all and, even if successful, those alternative actions may not allow us to meet our scheduled debt service obligations. Our revolving credit facility and the indenture governing the Senior Notes restrict our ability to dispose of assets and use the proceeds from those dispositions and may also restrict our ability to raise debt or certain forms of equity capital to be used to repay other indebtedness when it becomes due. We may not be able to consummate asset dispositions or to obtain proceeds in an amount sufficient to meet any debt service obligations then due.
If we cannot make scheduled payments on our debt, we will be in default and holders of the Senior Notes could declare all outstanding principal and interest to be due and payable, the lenders under our revolving credit facility could terminate their commitments to loan money, the lenders could foreclose against the assets securing their borrowings and we could be forced into bankruptcy or liquidation.
We are a holding company and depend on our subsidiaries for cash to meet our obligations and pay any dividends.
We are a holding company and conduct all of our operations through our subsidiaries, certain of which are not guarantors of our Senior Notes or our other indebtedness. Accordingly, repayment of our indebtedness, including the Senior Notes, is dependent on the generation of cash flow by our subsidiaries and their ability to make such cash available to us, by dividend, debt repayment or otherwise. Unless they are guarantors of the Senior Notes or other indebtedness, our subsidiaries do not have any obligation to pay amounts due on the Senior Notes or other indebtedness or to make funds available for that purpose. Our subsidiaries may not be able to, or may not be permitted to, make distributions to enable us to make payments in respect of our indebtedness, including the Senior Notes. Each of our subsidiaries is a distinct legal entity and, under certain circumstances, legal and contractual restrictions may limit our ability to obtain cash from our subsidiaries. While our revolving credit facility and the indenture governing the Senior Notes limit the ability of our subsidiaries to incur consensual restrictions on their ability to pay dividends or make other intercompany payments to us, these limitations are subject to qualifications and exceptions. In the event that we do not receive distributions from our subsidiaries, we may be unable to make required principal and interest payments on our indebtedness, including the Senior Notes.
Our inability to generate sufficient cash flows to satisfy our debt obligations, or to refinance our indebtedness on commercially reasonable terms or at all, would materially and adversely affect our financial position and results of operations.

13



Our hedging programs may limit the income and cash flows we would otherwise expect to receive if our hedging program were not in place and may otherwise affect our business.
In the ordinary course of business, we enter into hedging transactions to limit our exposure to price risks relating to primary aluminum prices, energy prices and foreign currency. To the extent that market prices or exchange rates at the expiration of these hedging transactions would have been more favorable to us than the fixed prices or rates established by these hedging transactions, our income and cash flows will be lower than they otherwise would have been. Additionally, to the extent that primary aluminum prices, energy prices or foreign currency exchange rates deviate materially and adversely from fixed, floor or ceiling prices or rates established by outstanding hedging transactions, we fail to satisfy certain covenants or an event of default occurs under the terms of the underlying documents, we could incur margin calls that could adversely impact our liquidity and result in a material adverse effect on our financial position, results of operations and cash flows. Conversely, we are exposed to risks associated with the credit worthiness of our hedging counterparties. The creditworthiness of hedging counterparties is inherently difficult to assess and can change quickly and dramatically. Non-performance by a counterparty could have a material adverse effect on our financial position, results of operations and cash flows.
Our failure to maintain satisfactory labor relations could adversely affect our business.
At December 31, 2015, approximately 63% of our employees were represented by labor unions under labor contracts with varying durations and expiration dates, including labor contracts with the USW, covering seven of our manufacturing locations. The labor contract with the USW covering employees at our Trentwood and Newark, Ohio facilities extends through September 2020. Contracts at four other manufacturing locations expire in 2017 and the remainder of 2016. We may not be able to renegotiate or negotiate our labor contracts on satisfactory terms. As part of any negotiation, we may reach agreements with respect to future wages and benefits, including healthcare benefits and any excise taxes that may result therefrom, that could materially and adversely affect our future financial position, results of operations and cash flows. In addition, negotiations could divert management attention or result in union-initiated work actions, including strikes or work stoppages, that could have a material adverse effect on our financial position, results of operations and cash flows. Moreover, the existence of labor agreements may not prevent such union-initiated work actions.
Our participation in multi-employer union pension plans may have a material adverse effect on our financial performance.
We are required to make contributions to multi-employer pension plans in amounts established under collective bargaining agreements. Pension expense for these plans is recognized as contributions are funded. Benefits generally are based on a fixed amount for each year of service. Based on the most recent information available to us, we believe a number of these multiemployer plans are underfunded. As a result, we expect that contributions to these plans may increase. Additionally, the benefit levels and related items will be issues in the negotiation of our collective bargaining agreements. Under current law, an employer that withdraws or partially withdraws from a multi-employer pension plan may incur withdrawal liability to the plan, which represents the portion of the plan’s underfunding that is allocable to the withdrawing employer under very complex actuarial and allocation rules. The failure of a withdrawing employer to fund these obligations can impact the remaining employers that participate in the plan. The amount of any increase or decrease in our required contributions to these multi-employer pension plans will depend upon the outcome of collective bargaining, actions taken by trustees who manage the plans and other employers that participate in the plans, government regulations and the actual return on assets held in the plans, among other factors.
Environmental compliance, clean up and damage claims may decrease our cash flow and adversely affect our business.
We are subject to numerous environmental laws and regulations with respect to, among other things: air and water emissions and discharges; the generation, storage, treatment, transportation and disposal of solid and hazardous waste; and the release of hazardous or toxic substances, pollutants and contaminants into the environment. Compliance with these environmental laws is and will continue to be costly.
Our continuing operations and certain of our former operations have subjected and may in the future subject us to fines, penalties and expenses for alleged breaches of environmental laws and to obligations to perform investigations or clean up of the environment. We may also be subject to claims from governmental authorities or third parties related to alleged injuries to the environment, human health or natural resources, including claims with respect to waste disposal sites, the clean up of sites currently or formerly used by us or exposure of individuals to hazardous materials. Any investigation, clean-up or other remediation costs, fines or penalties, or costs to resolve third-party claims, may be significant and could have a material adverse effect on our financial position, results of operations and cash flows.
We have accrued and will accrue for costs relating to the above matters that are reasonably expected to be incurred based on available information. However, it is possible that actual costs may differ, perhaps significantly, from the amounts expected or accrued. Similarly, the timing of those expenditures may occur faster than anticipated. In addition, new laws or regulations or

14



changes to existing laws and regulations may be enacted, including government mandated green initiatives and limitations on carbon emissions, that increase the cost or complexity of compliance. Difference in actual costs, the timing of payments for previously accrued costs and the impact of new or amended laws and regulations may have a material adverse effect on our financial position, results of operations and cash flows.
Governmental regulation relating to greenhouse gas emissions may subject us to significant new costs and restrictions on our operations.
Laws enacted by Congress or policies of the Environmental Protection Agency could regulate greenhouse gas emissions through cap-and-trade systems, carbon taxes or other programs under which emitters would be required to buy allowances to offset emissions of greenhouse gas, pay carbon based taxes, make significant capital investments, alter manufacturing practices or curtail production. In addition, several states, including the state of Washington, where we have manufacturing plants, are considering various greenhouse gas registration and reduction programs through legislative proposals, executive order and ballot initiatives. Certain of our manufacturing plants use significant amounts of energy, including electricity and natural gas and certain of our plants emit amounts of greenhouse gas above certain minimum thresholds that are likely to be imposed by existing proposals. Greenhouse gas regulation could increase the price of the electricity we purchase, increase costs for our use of natural gas, potentially restrict access to or the use of natural gas, require us to purchase allowances to offset our own emissions or result in an overall increase in our costs of raw materials, any one of which could significantly increase our costs, reduce our competitiveness in a global economy or otherwise negatively affect our business, operations or financial results. It is too early to predict how existing or future regulation will affect our business, operations or financial results.
We may be subject to risks relating to our information technology systems.
We rely on information technology systems to process, transmit and store electronic information and manage and operate our business. A breach in cyber security could expose us and our customers and suppliers to risks of misuse of confidential information, manipulation and destruction of data, production downtimes and operations disruptions, which in turn could adversely affect our reputation, competitive position, business or results of operations. The costs related to cyber or other security threats or disruptions may not be fully insured or indemnified by other means.
In addition, from time to time we may replace and/or upgrade our current information technology systems. These activities subject us to inherent costs and risks associated with replacing and updating these systems, including potential disruption of our internal control structure, substantial capital expenditures, demands on management time and other risks of delays or difficulties in transitioning to new systems or of integrating new systems into our current systems. Our systems implementations and upgrades may not result in productivity improvements at the levels anticipated, or at all. In addition, the implementation of new technology systems may cause disruptions in our business operations. Such disruption and any other information technology system disruptions and our ability to mitigate those disruptions, if not anticipated and appropriately mitigated, could have a material adverse effect on us.
We may not be able to utilize all of our net operating loss carryforwards.
We have net operating loss carryforwards and other significant U.S. tax attributes that we believe could offset otherwise taxable income in the United States. The net operating loss carryforwards available in any year to offset our net taxable income will be reduced following a more than 50% change in ownership during any period of 36 consecutive months (an "ownership change") as determined under the Internal Revenue Code of 1986 (the "Code"). Our certificate of incorporation prohibits and voids certain transfers of our common stock in order to reduce the risk that an ownership change will jeopardize our net operating loss carryforwards; however, these transfer restrictions will expire in accordance with their terms on July 6, 2016. We are evaluating alternatives with respect to the protection of our net operating loss carryforwards from and after July 6, 2016.
Because U.S. tax law limits the time during which carryforwards may be applied against future taxes, we may not be able to take full advantage of the carryforwards for federal income tax purposes. In addition, federal and state tax laws pertaining to net operating loss carryforwards may be changed from time to time such that the net operating loss carryforwards may be reduced or eliminated. If the net operating loss carryforwards become unavailable to us or are fully utilized, our future income will not be shielded from federal and state income taxation and the funds otherwise available for general corporate purposes would be reduced.

15



We could engage in or approve transactions involving our common shares that inadvertently impair the use of our federal income tax attributes.
Section 382 of the Code affects our ability to use our federal income tax attributes, including our net operating loss carryforwards, following a more than 50% change in ownership during any period of 36 consecutive months, an ownership change, as determined under the Code. Certain transactions may be included in the calculation of an ownership change, including transactions involving our repurchase or issuance of our common shares. When we engage in or approve any transaction involving our common shares that may be included in the calculation of an ownership change, our practice is to first perform the calculations necessary to confirm that our ability to use our federal income tax attributes will not be affected. These calculations are complex and reflect certain necessary assumptions. Accordingly, it is possible that we could approve or engage in a transaction involving our common shares that causes an ownership change and inadvertently impairs the use of our federal income tax attributes.
Transfer restrictions and other factors could hinder the market for our common stock.
In order to reduce the risk that an ownership change would jeopardize the preservation of our U.S. federal income tax attributes, including net operating loss carryforwards, for purposes of Sections 382 and 383 of the Code, our certificate of incorporation includes restrictions on transfers involving 5% ownership prior to July 6, 2016. These transfer restrictions may make our stock less attractive to large institutional holders, discourage potential acquirers from attempting to take over our company, limit the price that investors might be willing to pay for shares of our common stock and otherwise hinder the market for our common stock. We are evaluating alternatives with respect to the protection of our net operating loss carry-forwards from and after July 6, 2016.
Our certificate of incorporation includes transfer restrictions that may void transactions in our common stock effected by 5% stockholders.
Our certificate of incorporation restricts the transfer of our equity securities if either (1) the transferor holds 5% or more of the fair market value of all of our issued and outstanding equity securities or (2) as a result of the transfer, either any person would become such a 5% stockholder or the percentage stock ownership of any such 5% stockholder would be increased. These restrictions are subject to exceptions set forth in our certificate of incorporation and will expire in accordance with their terms on July 6, 2016. Any transfer that violates these restrictions is void and will be unwound as provided in our certificate of incorporation. We are evaluating alternatives with respect to the protection of our net operating loss carry-forwards from and after July 6, 2016.
We could engage in or approve transactions involving our common shares that adversely affect significant stockholders.
Under the transfer restrictions in our certificate of incorporation, prior to July 6, 2016, our 5% stockholders are, in effect, required to seek the approval of, or a determination by, our Board of Directors before they engage in transactions involving our common stock. We could engage in or approve transactions involving our common stock that limit our ability to approve future transactions involving our common stock by our 5% stockholders in accordance with the transfer restrictions in our certificate of incorporation without impairing the use of our federal income tax attributes. In addition, we could engage in or approve transactions involving our common stock that cause stockholders owning less than 5% to become 5% stockholders, resulting in those stockholders’ having to seek the approval of, or a determination by, our Board of Directors under our certificate of incorporation before they could engage in future transactions involving our common stock. For example, share repurchases reduce the number of our common shares outstanding and could cause a stockholder holding less than 5% to become a 5% stockholder even though it has not acquired any additional shares. We are evaluating alternatives with respect to the protection of our net operating loss carry-forwards from and after July 6, 2016.
The ownership of our stock is concentrated, with a few owners who may, individually or collectively, exert significant influence over us.
Certain investment funds, advisers and organizations own greater than 5% of our outstanding common stock as of December 31, 2015. As a result, any of them could have significant influence over matters requiring stockholder approval, including the composition of our Board of Directors. Further, to the extent that the substantial stockholders were to act in concert, they could potentially control any action taken by our stockholders. This concentration of ownership could also facilitate or hinder proxy contests, tender offers, open market purchase programs, mergers or other purchases of our common stock that might otherwise give stockholders the opportunity to realize a premium over the then prevailing market price of our common stock or cause the market price of our common stock to decline. We cannot assure you that the interests of our major stockholders will not conflict with our interests or the interests of our other investors.

16



Payment of dividends may not continue in the future and our payment of dividends and stock repurchases are subject to restriction.
Our Board of Directors has declared a cash dividend for each quarter since the summer of 2007. In addition, our Board of Directors has authorized a stock repurchase program. The future declaration and payment of dividends and the ongoing purchase of our shares, if any, will be at the discretion of the Board of Directors and will depend on a number of factors, including our financial and operating results, financial position and anticipated cash requirements. We can give no assurance that dividends will be declared and paid or that dividends will not be reduced in the future. Additionally, our revolving credit facility and the indenture for our Senior Notes impose limitations on our ability to pay dividends and repurchase our common shares.
Our annual variable payment obligations to two voluntary employees beneficiary associations ("VEBAs") are linked with our profitability, which means that not all of our earnings will be available to our stockholders.
We are obligated to make annual payments to two VEBAs calculated in part on our profitability. Our obligation to the VEBA that provides benefits for eligible retirees represented by certain unions and their surviving spouse and eligible dependents terminates on September 30, 2017 and is capped at $17.1 million per year. Our obligation to the VEBA that provides benefits for certain other eligible retirees, their surviving spouse and eligible dependents has no express termination date and is capped at $2.9 million per year. As a result of these variable payment obligations, our cash flows may be reduced and not all of our earnings will be available to our stockholders.
The USW has director nomination rights through which it may influence us, and USW interests may not align with our interests or the interests of our stockholders, debt holders and other stakeholders.
Pursuant to agreements between us and the USW, the USW has the right, subject to certain limitations, to nominate candidates which, if elected, would constitute 40% of our Board of Directors through December 31, 2020, at which time the USW is required to cause any director nominated by the USW to submit his or her resignation to our Board of Directors, which submission our Board of Directors may accept or reject in its discretion. As a result, the directors nominated by the USW have a significant voice in the decisions of our Board of Directors. It is possible that the USW may seek to extend the term of the agreement and its right to nominate board members beyond 2020.
Delaware law and our governing documents may impede or discourage a takeover, which could adversely affect the value of our common stock.
Provisions of Delaware law and our certificate of incorporation and bylaws may discourage a change of control of our company or deter tender offers for our common stock. We are currently subject to anti-takeover provisions under Delaware law. These anti-takeover provisions impose various impediments to the ability of a third party to acquire control of us. Additionally, provisions of our certificate of incorporation and bylaws impose various procedural and other requirements, which could make it more difficult for stockholders to effect certain corporate actions. For example, our certificate of incorporation authorizes our Board of Directors to determine the rights, preferences and privileges and restrictions of unissued shares of preferred stock without any vote or action by our stockholders. As a result, our Board of Directors can authorize and issue shares of preferred stock with voting or conversion rights that could adversely affect the voting or other rights of holders of common stock. Our certificate of incorporation also divides our Board of Directors into three classes of directors who serve for staggered terms. A significant effect of a classified Board of Directors may be to deter hostile takeover attempts because an acquirer could experience delays in replacing a majority of directors. Moreover, stockholders are not permitted to call a special meeting. Prior to July 6, 2016, our certificate of incorporation will restrict certain transactions in our common stock involving 5% stockholders or parties who would become 5% stockholders as a result of the transaction. The general effect of these transfer restrictions, which were put in place to reduce the risk that an ownership change would jeopardize the preservation of our U.S. federal income tax attributes, including net operating loss carryforwards, is to ensure that a change in ownership of more than 45% of our outstanding common stock cannot occur in any three-year period without the consent of our Board of Directors. These rights and provisions, and subsequent restrictions we may impose to replace the expiring restrictions, may have the effect of delaying or deterring a change of control of our company and may limit the price that investors might be willing to pay in the future for shares of our common stock.
In addition to the risks discussed above, as a publicly traded U.S. manufacturing company with customers and suppliers outside the United States, we are subject to a variety of other risks.
In addition to the risks discussed above, as a publicly traded U.S. manufacturing company with customers and suppliers outside the United States, we are subject to a variety of other risks, each of which could have a material adverse effect on our financial position, results of operations or cash flows, or the price of our common stock. These risks include, among others, those associated with:

17



the volatility of costs of fuel, principally natural gas and utility services, principally electricity, used by production facilities;
regulations that subject us to additional capital or margin requirements, or other restrictions on our trading and commodity positions, could have an adverse effect on our ability to hedge risks associated with our business or on the cost of our hedging activities;
changes in economic factors, including inflation and fluctuations in foreign currency exchange rates and interest rates, in the countries in which operations exist, customers are serviced or raw materials are purchased;
the ability to attract and retain key management and other personnel and develop effective succession plans;
compliance with a wide variety of health and safety laws and regulations and changes to such laws and regulations;
disputes, legal proceedings, or investigations, whether meritorious or not, with respect to a variety of matters, including matters related to personal injury, employees, taxes, contracts and product liability;
pursuing growth through acquisitions, including the ability to identify acceptable acquisition candidates, finance and consummate acquisitions on favorable terms and successfully integrate acquired assets or businesses;
protection of intellectual property, including patents, trademarks, trade secrets and copyrights, from infringement by others and the potential defense of claims, whether meritorious or not, alleging the unauthorized use of the intellectual property of others;
taxation by multiple jurisdictions and the impact of such taxation on effective tax rate and the amount of taxes paid;
compliance with Section 404 of the Sarbanes-Oxley Act of 2002, including the potential impact of compliance failures; and
the failure to meet the expectations of investors, including as a result of factors beyond the control of an individual company.
Item 1B. Unresolved Staff Comments
None.

18



Item 2. Properties
Information regarding the location, size and ownership of our principal production facilities as of December 31, 2015 is below:
Location
 
Square footage
 
Owned or Leased
Chandler, Arizona (Extrusion)
 
115,000

 
Owned/Leased1
Chandler, Arizona (Tube)
 
93,000

 
Owned/Leased2
Florence, Alabama
 
252,000

 
Owned
Jackson, Tennessee
 
310,000

 
Owned
Kalamazoo, Michigan
 
465,000

 
Leased3
London, Ontario (Canada)
 
276,000

 
Owned
Los Angeles, California
 
183,000

 
Owned
Newark, Ohio
 
1,293,000

 
Owned
Richland, Washington
 
45,000

 
Leased4
Richmond, Virginia (Bellwood)
 
443,000

 
Owned
Sherman, Texas
 
313,000

 
Owned
Spokane, Washington (Trentwood)
 
2,872,000

 
Owned/Leased5
Total
 
6,660,000

 
 
___________________________________
1. 
The Chandler, Arizona (Extrusion) facility is subject to a land lease with a lease term that expires in 2023, subject to certain extension rights held by us. The facility is owned by us and is not subject to any leases.
2. 
The Chandler, Arizona (Tube) facility is subject to a land lease with a lease term that expires in 2033, subject to certain extension rights held by us. The facility is owned by us and is not subject to any leases.
3. 
The Kalamazoo, Michigan facility is subject to a lease with a 2033 expiration date.
4. 
The Richland, Washington facility is subject to a lease that expires in December 2016, which we are currently in negotiations to extend.
5. 
The Spokane, Washington facility consists of 2,751,000 square feet, which is owned by us, and 121,000 square feet, which is subject to a lease with a 2020 expiration date and a renewal option subject to certain terms and conditions.
Plants and equipment and other facilities are generally in good condition and suitable for their intended uses. For additional information regarding our production facilities, see the table under Item 1. Business "Business Operations - Fabricated Products Segment - Types of Manufacturing Processes Employed" of this Report.
Our corporate headquarters, located in Foothill Ranch, California, consists of 36,000 square feet at December 31, 2015 and is subject to a lease that expires in 2019.
Item 3. Legal Proceedings
None.
Item 4. Mine Safety Disclosures
Not applicable.

19



PART II
Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities
Market Information
Our outstanding common stock is traded on the Nasdaq Global Select Market under the ticker symbol "KALU."
The following table sets forth the high and low transaction prices of our common stock for each quarterly period for fiscal years 2015 and 2014:
 
 
High
 
Low
Fiscal 2015
 
 
 
 
First quarter
 
$
78.39

 
$
68.42

Second quarter
 
$
86.16

 
$
75.60

Third quarter
 
$
88.92

 
$
77.92

Fourth quarter
 
$
88.70

 
$
75.61

Fiscal 2014
 
 
 
 
First quarter
 
$
73.33

 
$
66.78

Second quarter
 
$
74.27

 
$
66.43

Third quarter
 
$
81.62

 
$
71.44

Fourth quarter
 
$
76.53

 
$
68.26

Holders
As of February 12, 2016, there were approximately 667 holders of record of our common stock.
Dividends
We declare and pay regular quarterly cash dividends to holders of our common stock, including holders of restricted stock. We also pay quarterly dividend equivalents to the holders of certain restricted stock units and to the holders of performance shares granted prior to 2014 with respect to the target number of underlying shares of common stock (constituting approximately one-half of the maximum payout). Holders of performance shares granted beginning in 2014 are not paid a quarterly dividend equivalent, but instead are entitled to receive, in connection with the issuance of underlying shares of common stock in respect of performance shares that ultimately vest, a one-time payment equal to the dividends such holder would have received if the number of such shares of common stock so issued had been held of record by such holder from the date of grant of such performance shares through the date of such issuance. Total cash dividends (and dividend equivalents) paid in 2015, 2014 and 2013 were $1.60 per share (or $28.1 million), $1.40 per share (or $25.4 million) and $1.20 per share (or $23.0 million), respectively.
On January 15, 2016, we announced that our Board of Directors approved the declaration of a quarterly cash dividend of $0.45 per common share, or $8.2 million (including dividend equivalents), which was paid on February 12, 2016 to stockholders of record at the close of business on January 25, 2016.
The future declaration and payment of dividends, if any, will be at the discretion of our Board of Directors and will depend on a number of factors, including our financial and operating results, financial position and anticipated cash requirements and contractual restrictions under our revolving credit facility, the indenture for our 8.25% Senior Notes due 2020, or other indebtedness we may incur in the future. We can give no assurance that dividends will be declared and paid in the future. See Note 3 of Notes to Consolidated Financial Statements in this Report for additional information about restrictions on dividend payments.
Stock Performance Graph
The following graph compares the cumulative total shareholder return on our common stock with: (i) the Russell 2000® index, (ii) the S&P SmallCap 600® index and (iii) the S&P SmallCap 600® Materials index. We are a component of each of these indices. The graph assumes: (i) an initial investment of $100 as of December 31, 2010 and (ii) reinvestment of all dividends. The performance graph is not necessarily indicative of the future performance of our stock price.

20



Issuer Repurchases of Equity Securities
The following table provides information regarding our repurchases of our common shares during the quarter ended December 31, 2015:
 
 
Amended and Restated 2006 Equity and Performance Incentive Plan
 
Stock Repurchase Plan
 
 
Total Number of Shares Purchased1
 
Average Price per Share
 
Total Number of Shares Purchased2
 
Average Price per Share
 
Maximum Dollar Value of Shares that May Yet Be Purchased Under the Program (millions)2
October 1, 2015 - October 31, 2015
 
703

 
$
83.34

 
18,324

 
$
82.27

 
$
125.8

November 1, 2015 - November 30, 2015
 
1,225

 
81.62

 
14,561

 
82.73

 
$
124.6

December 1, 2015 - December 31, 2015
 

 

 
15,238

 
84.43

 
$
123.3

Total
 
1,928

 
$
82.25

 
48,123

 
$
83.09

 
N/A


21



_________________________________________ 
1. 
Under our equity and performance incentive plan, participants may elect to have us withhold common shares to satisfy minimum statutory tax withholding obligations arising from the recognition of income and the vesting of restricted stock, restricted stock units and performance shares. When we withhold these shares, we are required to remit to the appropriate taxing authorities the market price of the shares withheld by us on the date of withholding. The withholding of common shares by us could be deemed a purchase of such common shares. During the quarter ended December 31, 2015, we withheld 1,928 shares of common stock to satisfy employee tax withholding obligations. All such were withheld and canceled by us on the applicable vesting dates or dates on which income to the employees was recognized and the number of shares withheld was determined based on the closing price per common share as reported on the Nasdaq Global Select Market on such dates.
2. 
Of the $123.3 million that as of December 31, 2015 may yet be used to purchase our shares pursuant to the stock repurchase plan, $23.3 million is part of the $75.0 million that was authorized in December 2013 and $100.0 million was authorized in April 2015. Repurchase transactions will occur at such times and prices as management deems appropriate and will be funded with our excess liquidity after giving consideration to internal and external growth opportunities and future cash flows. Repurchases may be in open-market transactions or in privately negotiated transactions and the program may be modified or terminated by our Board of Directors at any time.
During the year ended December 31, 2015, 1,015,185 shares of our common stock were issued in connection with exercises of warrants. The warrants were net-share-settled and accordingly we did not receive any proceeds from their exercise. The shares of common stock issued upon exercises of the warrants were issued in reliance on the exemption from registration provided by Section 3(a)(9) of the Securities Act of 1933, as amended, and no underwriters were used in connection with the warrant exercises. For additional information related to the warrants, see Note 3, Note 10 and Note 12 of Notes to Consolidated Financial Statements included in this Report.
Item 6. Selected Financial Data
The following table represents our selected financial data. The table should be read in conjunction with Item 7. "Management’s Discussion and Analysis of Financial Condition and Results of Operations" and Item 8. "Financial Statements and Supplementary Data" of this Report (in millions of dollars, except shipments, average realized sales price and per share amounts):
 
 
Year Ended December 31,
 
 
2015
 
2014
 
2013
 
2012
 
2011
Net sales
 
$
1,391.9

 
$
1,356.1

 
$
1,297.5

 
$
1,360.1

 
$
1,301.3

Net (loss) income1
 
$
(236.6
)
 
$
71.8

 
$
104.8

 
$
85.8

 
$
25.1

Net (loss) income per share - Basic
 
$
(13.76
)
 
$
4.02

 
$
5.56

 
$
4.49

 
$
1.32

Net (loss) income per share - Diluted
 
$
(13.76
)
 
$
3.86

 
$
5.44

 
$
4.45

 
$
1.32

Shipments (mm lbs)
 
615.4

 
588.8

 
563.7

 
585.9

 
560.9

Average realized sales price (per lb)
 
$
2.26

 
$
2.30

 
$
2.30

 
$
2.32

 
$
2.32

Cash dividends declared per common share
 
$
1.60

 
$
1.40

 
$
1.20

 
$
1.00

 
$
0.96

Capital expenditures
 
$
63.1

 
$
59.4

 
$
70.4

 
$
44.1

 
$
32.5

Depreciation and amortization expense
 
$
32.4

 
$
31.1

 
$
28.1

 
$
26.5

 
$
25.2

_____________________
1. 
Net (loss) income includes the impact of removing the net assets of the voluntary employees beneficiary association that provides benefits for eligible retirees represented by certain unions and their surviving spouses and eligible dependents and related deferred tax liabilities from our Consolidated Balance Sheets during the first quarter of 2015. See Note 6 of Notes to Consolidated Financial Statements included in this Report for further details.

22



 
 
December 31,
 
 
2015
 
2014
 
2013
 
2012
 
2011
Assets:
 
 
 
 
 
 
 
 
 
 
  Fabricated Products
 
$
904.8

 
$
878.9

 
$
852.5

 
$
771.2

 
$
637.0

  All Other
 
345.3

 
864.8

 
918.4

 
981.3

 
683.6

Total assets1
 
$
1,250.1

 
$
1,743.7

 
$
1,770.9

 
$
1,752.5

 
$
1,320.6

Cash and short-term investments
 
$
102.5

 
$
291.7

 
$
299.0

 
$
358.4

 
$
49.8

Long-term borrowings (at face value), including amounts due within one year
 
$
197.8

 
$
400.0

 
$
400.0

 
$
400.0

 
$
179.7

_____________________
1. 
The 2015 Total assets reflect the removal of the Union VEBA net assets from our Consolidated Balance Sheets during the first quarter of 2015. See Note 6 of Notes to Consolidated Financial Statements included in this Report for further details.
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations
This Report contains statements which constitute "forward-looking statements" within the meaning of the Private Securities Litigation Reform Act of 1995. These statements appear throughout this Report and can be identified by the use of forward-looking terminology such as "believes," "expects," "may," "estimates," "will," "should," "plans" or "anticipates" or the negative of the foregoing or other variations of comparable terminology, or by discussions of strategy. Readers are cautioned that any such forward-looking statements are not guarantees of future performance and involve significant risks and uncertainties and that actual results may vary from those in the forward-looking statements as a result of various factors. These factors include: the effectiveness of management’s strategies and decisions; general economic and business conditions, including cyclicality and other conditions in the aerospace, automotive and other end market applications we serve; developments in technology; new or modified statutory or regulatory requirements; and changing prices and market conditions. This Item and Item 1A. "Risk Factors" each identify other factors that could cause actual results to vary. No assurance can be given that these are all of the factors that could cause actual results to vary materially from the forward-looking statements.
Management’s discussion and analysis of financial condition and results of operations ("MD&A") is designed to provide a reader of our financial statements with a narrative from the perspective of our management on our financial condition, results of operations, liquidity and certain other factors that may affect our future results. Our MD&A is presented in the following sections:
Overview;
Management Review of 2015 and Outlook for the Future;
Results of Operations;
Certain Information Related to Our Significant Tax Attributes;
Liquidity and Capital Resources;
Contractual Obligations, Commercial Commitments and Off-Balance Sheet and Other Arrangements;
Critical Accounting Estimates and Policies; and
New Accounting Pronouncements.
Our MD&A should be read in conjunction with the consolidated financial statements and related notes included in Item 8. "Financial Statements and Supplementary Data" of this Report.
In the discussion of operating results below, we refer to certain items as non-run-rate items. For purposes of such discussion, non-run-rate items are items that, while they may recur from period-to-period: (i) are particularly material to results; (ii) affect costs primarily as a result of external market factors; and (iii) may not recur in future periods if the same level of underlying performance were to occur. Non-run-rate items are part of our business and operating environment but are worthy of being highlighted for the benefit of readers of our financial statements. Our intent is to allow users of the financial statements to consider our results both in light of and separately from items such as unrealized mark-to-market gains or losses on derivatives related to fluctuations in underlying metal and energy prices and currency exchange rates, lower of cost or market inventory write-downs and gains or losses related to our voluntary employee beneficiary associations ("VEBAs"). For a reconciliation of

23



operating (loss) income excluding non-run-rate items to operating (loss) income, see "Results of Operations - Segment and Business Unit Information" below.
We also provide information regarding value added revenue, which represents net sales less the hedged cost of alloyed metal. A fundamental part of our business model is to mitigate the impact of aluminum price volatility. We purchase primary and scrap aluminum, our main raw material, at prices that fluctuate on a monthly basis, and we use pricing policies that generally allow us to pass metal cost fluctuations through to our customers. For some of our higher value added products sold on a spot basis, however, the pass through of metal price movements can sometimes lag by as much as several months, with a favorable impact to us when metal prices decline and an adverse impact to us when metal prices increase. Additionally, we often enter into firm-price customer sales agreements that specify the underlying metal price plus a conversion price. Spot sales with lagged metal price pass through and firm-price sales agreements create metal price exposure for us which we mitigate through a hedging program. Our pricing policies and hedging program are designed to largely mitigate the impact on our profitability as a result of fluctuations in underlying metal price. Value added revenue (including average realized value added revenue and value added revenue of the product categories of our Fabricated Products segment) is worthy of being highlighted for the benefit of readers of our financial statements. Our intent is to allow users of the financial statements to consider our net sales information both with and without the metal cost component thereof. For a reconciliation of value added revenue to net sales, see "Results of Operations - Segment and Business Unit Information" below.
Overview
We are a leading North American manufacturer of semi-fabricated specialty aluminum products for the following end market applications: aerospace and high strength products ("Aero/HS products"); extrusions for automotive applications ("Automotive Extrusions"); general engineering products ("GE products"); and other industrial products ("Other products"). We operate 12 focused production facilities in North America to serve a global customer base. We have one operating segment, Fabricated Products. See "Results of Operations - Segment and Business Unit Information" below.
Our highly engineered products are manufactured to meet demanding requirements of aerospace/high strength, automotive, general engineering and other industrial end market applications. We have focused our business on select end market applications where we believe we have sustainable competitive advantages and opportunities for long-term profitable growth. We believe that we differentiate ourselves with "Best in Class" customer satisfaction driven by quality, availability, service and delivery performance. We believe that we further differentiate ourselves by offering a broad product portfolio, including our KaiserSelect® products, which are engineered and manufactured to deliver enhanced product characteristics with improved consistency, which results in such benefits as better performance, lower waste and, in many cases, lower production cost for our customers.
In the commercial aerospace sector, we believe that global economic growth and development will continue to drive growth in airline passenger miles. In addition, trends such as longer routes, larger payloads and focus on fuel efficiency have increased the demand for new and larger aircraft. We believe the strength of commercial aerospace demand is demonstrated by the existing nine-year backlog for the two primary manufacturers of commercial aircraft. Further, we believe that the long-term demand drivers, including growing build rates, larger airframes and continued conversion of parts to monolithic design (where aluminum plate is heavily machined to form the desired part from a single piece of metal as opposed to using aluminum sheet, extrusions or forgings that are affixed to one another using rivets, bolts or welds) throughout the industry will continue to increase demand for our high strength aerospace plate. We expect aerospace plate demand to grow at a pace higher than our other Aero/HS products (including sheet, extruded shapes, cold finish rod and bar and tube) as some of the applications using these other Aero/HS products continue to be converted to monolithic design (using plate in lieu of these other products). Additionally, our Aero/HS products other than plate tend to be used to a greater degree in applications that have a lower growth rate than commercial aerospace.
Our Aero/HS and GE products are also sold for use in defense end market applications. Requirements of military engagements and sequestration of spending by the United States government will determine near-term demand for our Aero/HS and GE products for use in such applications. We expect the production of the F-35, or Joint Strike Fighter, to continue to be a demand driver for our Aero/HS products.
Commercial aerospace and defense end market applications have demanding customer requirements for quality and consistency. As a result, there are a limited number of suppliers worldwide who are qualified to serve these market segments. We believe barriers to entry include significant capital requirements, technological expertise and a rigorous qualification process for safety-critical applications.
In recent years, automotive original equipment manufacturers ("OEMs") and their suppliers have at an increasing pace been converting many automotive components that historically were made of steel to aluminum to decrease weight without sacrificing structural integrity and safety performance and thereby achieve greater fuel efficiency standards mandated by

24



stringent United States' Corporate Average Fuel Economy ("CAFE") regulations. We believe fuel efficiency standards along with consumer preference for larger vehicles will continue to drive growth in demand for aluminum extruded components in passenger vehicles as a replacement for the heavier weight of steel components. Our Automotive Extrusions are designed and produced to provide specific mechanical properties and performance attributes required in automotive applications across a broad mix of North American OEMs and automotive platforms. We believe that these attributes are not easily replicated by our competitors and are important to our customers, who are typically first tier automotive suppliers.
Our GE products serve the North American industrial market segments and demand for these products generally tracks the broader manufacturing economic environment.
Management Review of 2015 and Outlook for the Future
Our 2015 full year results reflected record shipments driven by higher volume of heat treat plate and automotive extrusions. The previous investments made at our Spokane, Washington ("Trentwood") facility and across our automotive platform were key factors in enabling the growth in shipments and overall results. The year-over-year increase in operating income reflected operating leverage from strong volume, improved pricing for heat treat plate and certain general engineering products, as well as some benefit from lower contained metal costs on some of our higher value added products. Although we continued to derive benefit from previous investments improving manufacturing efficiencies, these benefits were more than offset by growth related costs and inefficiencies associated with the significant increase in our automotive extrusions as we continued to launch and ramp-up numerous new automotive programs during the year, including new programs for the redesigned Ford F-150 truck.
Based on new programs booked and to support further demand growth for our automotive extrusions, we continued to make investments to expand our capacity, including upgrades to existing extrusion presses at our London, Ontario, Sherman, Texas and Richmond, Virginia facilities, the addition of a new extrusion press at our London, Ontario facility that was in start-up at year-end 2015, and significant spending on a new extrusion press at our Sherman, Texas facility that will be in production later in 2016. We also commenced a multi-year, $150.0 million capital investment project at our Trentwood facility focused on equipment upgrades throughout the process flow to reduce conversion costs and increase efficiency, further improving our competitive cost position on all products produced at the Trentwood facility. A significant portion of the investment will focus on modernizing the legacy equipment and process flow for thin gauge plate to achieve KaiserSelect® quality enhancements for these aerospace and general engineering products. In addition to cost and quality benefits, the investments will result in a 5%-10% increase in manufacturing capacity at our Trentwood facility by early 2018. The project is scheduled to be completed over the next five years to minimize plant disruption and facilitate execution.
Consistent with our priorities for capital deployment, in addition to significant investments in our operations, we retired $175.0 million of convertible debt and returned $77.3 million of cash to shareholders through share repurchases and dividends, increasing our quarterly dividend 14% in early 2015 to $0.40 per share and an additional 12.5% in early 2016 to $0.45 per share.
Outlook
We anticipate continued growth in total value added revenue with improvement in operating income driven by sales growth and continued improvement in manufacturing efficiencies. Overall for 2016, we anticipate a 3%-5% year-over-year increase in our total value added revenue driven by approximately 5% growth in value added revenue for our Aero/HS applications and approximately 10% growth in value added revenue for Automotive Extrusions. Demand for our GE and industrial applications is expected to be relatively flat with no indication of any positive shift in 2016 demand. We continue to anticipate increased import activity and price competition for GE plate in 2016.
As we look at demand drivers over the next three years and related growth opportunities for each of our served markets, we continue to envision growth in commercial aerospace demand driven by increasing build rates, larger airframes and continued conversion to monolithic design. Airframe builds in 2015 were a record, and for the sixth consecutive year orders exceeded builds, maintaining the very strong nine-year backlog. For other aerospace applications, such as regional, business and military aircraft, we expect slow overall growth, and for high strength products used in other industrial applications we anticipate little to no growth given the weakness in U.S. manufacturing economy. Overall, we anticipate compound annual demand growth in our Aero/HS served markets of approximately 5% over the next three years.
Demand for our Automotive Extrusions is driven by mature applications including anti-lock braking systems and drive train components and growing applications that include chassis, structural components and crash management systems where aluminum is being utilized to light-weight vehicles. While we remain optimistic about the prospects for growing aluminum extrusion content in vehicles, we are increasingly cautious regarding the outlook for North American build rates. As such, we anticipate approximately 6% compound annual demand growth for our served automotive markets over the next three years driven by approximately 1% growth in North American build rates and approximately 5% content growth.

25



In addition to capitalizing on the secular growth opportunities in our served markets, we continue to benefit from investments we have made over the years to improve efficiency and overall throughput. We anticipate that the modernization project at our Trentwood facility along with other planned investments will provide the next step in advancing our overall manufacturing efficiencies and product quality while creating additional capacity for heat treat plate and automotive extrusions. Based on these growth related investments in addition to our sustaining capital investments, we anticipate capital spending of approximately $60.0 million to $80.0 million per year over the next three years with spending in 2016 at the upper end of the range.
Results of Operations
Fiscal 2015 Summary
We reached agreement on a definitive expiration date of our obligation to make variable cash contributions to the Union VEBA which caused us to terminate defined benefit accounting with respect to the Union VEBA in the first quarter 2015. Removing the net assets and the deferred tax liabilities related to the Union VEBA from our balance sheet and establishing liabilities for expected remaining payments resulted in a predominantly non-cash pretax loss of $492.2 million in the first quarter, which we considered to be non-run-rate.
Our reported operating loss for 2015 was $345.9 million reflecting predominantly non-cash, non-run-rate charges totaling $496.4 million, primarily related to settlement accounting for the Union VEBA. Adjusted for non-run-rate items, operating income was $150.5 million for the full year 2015. See "Segment and Business Unit Information" below for further discussion of our operating loss before non-run-rate items.
Net loss for 2015 was $236.6 million, as reported. Adjusting for the non-run-rate items as discussed above, adjusted net income was $71.6 million. See "Segment and Business Unit Information" below for discussion of additional non-run-rate items.
We recorded a $2.6 million lower of cost or market inventory adjustment in the fourth quarter primarily due to the decline in metal prices. We considered this inventory adjustment to be a non-run-rate item.
We had combined cash balances, short-term investments and net borrowing availability under our revolving credit facility (with no borrowings thereunder outstanding) of approximately $383.3 million as of December 31, 2015.
We invested $63.1 million in capital spending. See "Liquidity and Capital Resources Capital Expenditures and Investments" below.
We paid a variable cash contribution to the VEBAs with respect to 2014 of $13.7 million and recorded a $19.6 million payable to the VEBAs for the variable contribution with respect to 2015.
We settled our 4.5% Cash Convertible Senior Notes ("Convertible Notes") and the related Option Asset and Bifurcated Conversion Feature on April 1, 2015 with a net cash outflow of $175.0 million; we issued 1,015,185 shares of our common stock in connection with exercised warrants also related to the Convertible Notes. See Note 3 for additional information.
We repurchased $27.2 million aggregate principal amount of our 8.25% Senior Notes due 2020 ("Senior Notes") for 107.5% of the face value.
In December 2015, we amended our revolving credit facility to extend the maturity to December 2020, improve pricing and provide more financial flexibility. The commitment under the facility remained unchanged at $300.0 million.
We paid a total of approximately $28.1 million, or $1.60 per common share, in cash dividends to stockholders, including holders of restricted stock, and dividend equivalents to holders of certain restricted stock units and to the holders of performance shares granted prior to 2014 with respect to the target number of underlying common shares (constituting approximately one-half of the maximum payout).
We repurchased 647,520 shares of common stock in 2015 for a total cost of $49.4 million. Share repurchases were pursuant to a stock repurchase program authorized by our Board of Directors. As of December 31, 2015, $123.3 million was available under the program to purchase additional shares of our common stock.

26



Consolidated Selected Operational and Financial Information
The following data should be read in conjunction with our consolidated financial statements and the notes thereto included in Item 8. "Financial Statements and Supplementary Data" of this Report. See Note 13 of Notes to Consolidated Financial Statements included in this Report for further information regarding segments.
Net Sales. We reported Net sales for 2015 of $1,391.9 million, compared to $1,356.1 million for 2014 and $1,297.5 million for 2013. The increase in Net sales during 2015 compared to 2014 reflected a 5% increase in Fabricated Products segment shipment volume, partially offset by a 2% decrease in average realized sales price per pound. The increase in Fabricated Products segment shipment volume was primarily due to a 15.0 million pound, or 19%, increase in Automotive Extrusions shipment volume, an 8.0 million pound, or 4% increase in GE products shipment volume and a 7.0 million pound, or 3%, increase in Aero/HS products shipment volume. The increase in Automotive Extrusions shipments reflected launches of new programs at each of our automotive facilities, including a significant ramp up of programs on the new aluminum-intensive Ford F-150 platform, as well as strong demand for certain other large vehicle models that we supply. The decrease in average realized sales price per pound reflected an 8% decrease in average hedged cost of alloyed metal prices per pound, partially offset by a 3% increase in average value added revenue per pound. The increase in average value added revenue per pound reflected spot pricing improvements on some Aero/HS and GE products, the benefit from lower contained metal prices on some high value added products and a more favorable shipment mix of Aero/HS and GE products sold. See the table in "Segment and Business Unit Information" below for further details.
The increase in Net sales during 2014 compared to 2013 reflected a 4% increase in Fabricated Products segment shipment volume. The increase in Fabricated Products segment shipment volume was primarily due to a 14.4 million pound, or 22%, increase in Automotive Extrusions shipment volume and a 12.6 million pound, or 6%, increase in Aero/HS products shipment volume. Total average realized sales price per pound for 2014 was consistent with that of 2013. However, the average realized value added revenue per pound declined $0.06 per pound, or 5%, which was offset by a $0.06 per pound, or 6%, increase in average hedged cost of alloyed metal prices per pound. The decline in average value added revenue per pound reflected: (i) a 9% decrease in value added revenue per pound for Aero/HS products, primarily due to lower pricing for heat treat plate products; (ii) a 4% decrease in value added revenue per pound for GE products due to lower heat treat plate pricing, partially offset by (iii) a 13% increase in value added revenue per pound for Automotive Extrusions driven by a richer mix of higher valued products and the launch of several new automotive programs in 2014. See the table in "Segment and Business Unit Information" below for further details.
Fluctuation in the Midwest Transaction Price for primary aluminum does not necessarily directly impact profitability because: (i) a substantial portion of the business conducted by the Fabricated Products segment passes aluminum price changes directly onto customers and (ii) our hedging activities in support of the Fabricated Products segment’s firm-price sales agreements limit our losses, as well as gains, from primary metal price changes.
Cost of Products Sold, Excluding Depreciation and Amortization and Other Items. Cost of products sold, excluding depreciation and amortization and other items for 2015 totaled $1,115.4 million, or 80% of Net sales, compared to $1,117.5 million, or 82% of Net sales, in 2014 and $1,038.9 million, or 80% of Net sales, in 2013. The $2.1 million decrease from 2014 to 2015 was comprised of a $21.6 million decrease in hedged cost of alloyed metal, partially offset by $19.5 million of higher net manufacturing conversion and other costs. Of the $21.6 million decrease in hedged cost of alloyed metal, $49.9 million was due to lower hedged metal prices, partially offset by $28.3 million due to higher shipment volume, as discussed in "Net Sales" above. The $19.5 million increase in net manufacturing conversion and other costs reflected $11.5 million of higher conversion costs due to the impact of higher shipment volume, $7.1 million due to higher manufacturing costs largely related to start-ups of automotive programs and higher overhead costs to support automotive growth, and approximately $0.9 million of other costs. See "Segment and Business Unit Information" below for a further discussion of the comparative results of operations for 2015 and 2014.
The increase in Cost of products sold, excluding depreciation and amortization and other items during 2014 compared to 2013 was primarily due to: (i) a $59.8 million increase related to the higher hedged cost of alloyed metal prices discussed in "Net Sales" above; (ii) a $26.3 million increase due to sales impact; (iii) $2.2 million of higher major maintenance expense related to the ramp up of major 2013 capital improvement projects; and (iv) $3.2 million of higher energy cost related primarily to the severe 2014 winter season. These increases were partially offset by a reduction in: (i) environmental costs of $2.7 million and (ii) net manufacturing conversion and other costs of approximately $10.2 million.
See "Segment and Business Unit Information" below for further discussion of the comparative results of operations for 2015, 2014 and 2013.
Lower of Cost or Market Inventory Write-Down. We recorded a lower of cost or market inventory write-down of $2.6 million in 2015, predominantly as a result of declining metal prices.

27



Unrealized Loss (Gain) on Derivative Instruments. Unrealized loss (gain) on derivative instruments is primarily due to changes in underlying commodity prices as well as derivative settlements and are related to our operational hedges. These hedges are intended to mitigate our exposure to changes in prices for certain products sold and consumed by us and, to a lesser extent, to mitigate our exposure to changes in foreign currency exchange rates. Unrealized loss (gain) on derivative instruments was $3.4 million, $10.4 million and $(0.7) million for 2015, 2014 and 2013, respectively. Unrealized loss in 2015 was comprised of a $0.5 million loss on natural gas hedge positions and $4.6 million loss on aluminum hedge positions, partially offset by a $1.7 million gain on electricity hedge positions. See Note 10 of Notes to Consolidated Financial Statements included in this Report for details on the unrealized loss (gain) on derivative instruments for 2014 and 2013.
Depreciation and Amortization. Depreciation and amortization for 2015 was $32.4 million compared to $31.1 million for 2014 and $28.1 million for 2013. Approximately $1.3 million of the increase in Depreciation and amortization in 2015 compared to 2014 was due to various construction-in-progress projects being placed in service during 2015 such as the capital upgrades at several of our extrusion facilities to support new automotive programs that will launch over the next few years. Approximately $2.2 million of the increase in Depreciation and amortization expense in 2014 compared to 2013 was due to additional construction in progress being placed in service during 2014 in connection with our casting complex and Phase 5 expansion at our Trentwood facility.
Selling, General, Administrative, Research and Development ("SG&A and R&D"). SG&A and R&D expense totaled $88.1 million in 2015 compared to $81.4 million in 2014. The increase in 2015 was due primarily to an increase of $3.7 million in employee incentive compensation and $2.5 million in salaries and benefits.
SG&A and R&D expense totaled $81.4 million in 2014 compared to $80.4 million in 2013. The increase in 2014 was primarily due to increased investment in research and development initiatives.
Net Periodic Postretirement Benefit Cost (Income) Relating to VEBAs. Net periodic postretirement benefit cost (income) relating to the VEBAs totaled $2.4 million, $(23.7) million and $(22.5) million in 2015, 2014 and 2013, respectively. The increase in cost in 2015 was due primarily to the removal of the net assets of the VEBA that provides benefits for eligible retirees represented by certain unions and their surviving spouses and eligible dependents (the "Union VEBA") and related deferred tax liabilities from our consolidated financial statements during the quarter ended March 31, 2015. The 2015 cost reflected only the cost associated with the VEBA that provides healthcare related benefits for certain other retirees and their spouse and eligible dependents (the "Salaried VEBA"), which was netted against the net periodic postretirement benefit income of the Union VEBA in prior years. The net periodic postretirement benefit cost relating to the Salaried VEBA was $0.6 million and $1.2 million for 2014 and 2013, respectively. The increase in cost in 2015 was due primarily to the increase in the annual healthcare reimbursement benefit starting in 2015 for plan participants in the Salaried VEBA. The increase in income in 2014 was due primarily to increases in expected return on plan assets for both VEBAs. See Note 6 of Notes to Consolidated Financial Statements included in this Report for disclosure regarding the VEBAs.
Loss on Removal of Union VEBA Net Assets. Loss on removal of Union VEBA net assets totaled $493.4 million in 2015 due to the removal of the Union VEBA’s plan assets, related deferred tax liabilities and accumulated other comprehensive loss from our consolidated financial statements during the quarter ended March 31, 2015 as a result of the definitive expiration of our obligation to make annual variable contributions to the Union VEBA for any period after September 2017. The loss on removal of Union VEBA net assets included a $16.8 million accrual for the 2015 variable contribution to be paid in the first quarter of 2016 and a $29.9 million accrual for the estimated variable contributions for 2016 (to be paid in 2017) and 2017 (to be paid in 2018). The final amount is subject to change until the close of each respective calendar year. See Note 6 of Notes to Consolidated Financial Statements included in this Report for further details. The estimated liability for the remaining variable cash contributions will be adjusted quarterly based on our most current projections of cash flow (as defined) with the changes reflected in our Operating (loss) income.
Other Operating Charges, Net. Other operating charges in 2015 and 2014 consisted primarily of $0.1 million and $1.5 million, respectively, of impairment charges related to property, plant and equipment. There were no Other operating charges, net in 2013.
Interest Expense. Interest expense represents cash and non-cash interest expense incurred on our Convertible Notes, which were settled on April 1, 2015, our Senior Notes and our revolving credit facility, net of capitalized interest. Interest expense was $24.1 million, $37.5 million and $35.7 million for 2015, 2014 and 2013, respectively, net of $1.8 million, $2.5 million and $3.4 million of interest expense capitalized as part of construction-in-progress, respectively, for the three periods. Non-cash amortization of the discount on our Convertible Notes accounted for $2.4 million, $9.1 million and $8.2 million of the total interest expense in 2015, 2014 and 2013, respectively. Interest expense in 2015, 2014 and 2013 was primarily related to interest expense incurred on our Convertible Notes and our Senior Notes.

28



Other (Expense) Income, Net. Other (expense) income, net was $(1.8) million for 2015, compared to $6.7 million for 2014 and $5.6 million for 2013. Other (expense) income, net for 2015 was due primarily to a $2.5 million loss related to the repurchase of Senior Notes. Other (expense) income, net for 2014 and 2013 primarily consisted of unrealized gains associated with our hedges relating to the Convertible Notes. See Note 3 and Note 15 of Notes to Consolidated Financial Statements included in this Report for further information.
Income Tax Benefit (Provision). The income tax benefit for 2015 was $135.2 million, resulting in an effective tax rate of 36.4%. The difference between the effective tax rate and the projected blended statutory tax rate for 2015 was primarily due to: (i) a decrease in unrecognized tax benefits, including interest and penalties, of $1.8 million, resulting in a 0.5% increase in the effective tax rate; (ii) state tax rate and apportionment changes in various states resulting in an increase of $4.7 million, which resulted in a 1.3% decrease in the effective tax rate; and (iii) an increase in the valuation allowance for Federal and certain state net operating losses of $2.0 million, which resulted in a 0.5% decrease to the effective tax rate.
The income tax provision for 2014 was $35.3 million, resulting in an effective tax rate of 33.0%. The difference between the effective tax rate and the projected blended statutory tax rate for 2014 was primarily due to: (i) a decrease in unrecognized tax benefits, including interest and penalties, of $2.3 million, resulting in a 2.1% decrease in the effective tax rate; (ii) a lower state tax rate in various states resulting in a decrease of $1.6 million, which resulted in a 1.5% decrease in the effective tax rate; and (iii) a decrease in the valuation allowance for certain state net operating losses of $0.7 million, which resulted in a 0.6% decrease to the effective tax rate.
The income tax provision for 2013 was $38.4 million, resulting in an effective tax rate of 26.8%. The difference between the effective tax rate and the projected blended statutory tax rate for 2013 was primarily due to: (i) a decrease in unrecognized tax benefits, including interest and penalties, of $4.4 million, resulting in a 3.1% decrease in the effective tax rate due to an audit settlement with the Canada Revenue Agency Competent Authority on February 28, 2013 for the 1998-2004 tax years; (ii) a decrease in unrecognized tax benefits, including interest and penalties, of $4.6 million, resulting in a 3.2% decrease in the effective rate; (iii) a decrease from a bilateral advance pricing agreement between Canada and the U.S. for $2.9 million, resulting in a 2.0% decrease in the effective tax rate; and (iv) a decrease from an audit settlement with the Canada Revenue Agency for $5.3 million, resulting in a 3.7% decrease in the effective tax rate.
Segment and Business Unit Information
Consistent with the manner in which our chief operating decision maker reviews and evaluates our business, we have one operating segment, which we refer to as Fabricated Products, that produces semi-fabricated specialty aluminum products, such as aluminum plate and sheet and extruded and drawn products, primarily used in aerospace/high strength, automotive, general engineering and other industrial end market applications. We categorize our products by the following end market applications: Aero/HS products, Automotive Extrusions, GE products and Other products.
We also have a business unit, All Other, which provides general and administrative support for our operations. For purposes of segment reporting under United States generally accepted accounting principles ("GAAP"), we treat the Fabricated Products segment as a reportable segment. All Other is not considered a reportable segment.
The following data should be read in conjunction with our consolidated financial statements and the notes thereto included in this Report. See Note 13 of Notes to Consolidated Financial Statements included in this Report for further information regarding segments.

29



Fabricated Products
The table below provides selected operational and financial information for our Fabricated Products segment for each period presented (in millions of dollars):
 
 
Year Ended
December 31,
 
 
2015
 
2014
 
2013
Segment operating income
 
$
190.8

 
$
151.4

 
$
188.6

Impact to segment operating income of non-run-rate items:
 
 
 
 
 
 
Adjustments to plant-level LIFO1
 
7.0

 
(4.0
)
 
7.4

Mark-to-market (loss) gain on derivative instruments
 
(3.4
)
 
(10.4
)
 
0.7

Non-cash lower of cost or market inventory write-down2
 
(2.6
)
 

 

Workers’ compensation (cost) benefit due to discounting
 
(0.2
)
 

 
1.1

Asset impairment charges
 
(0.1
)
 
(1.5
)
 

Environmental expenses3
 
(1.7
)
 
(1.2
)
 
(4.0
)
Total non-run-rate items
 
(1.0
)
 
(17.1
)
 
5.2

Segment operating income excluding non-run-rate items
 
$
191.8

 
$
168.5

 
$
183.4

_____________________
1. 
We manage our Fabricated Products segment business on a monthly last-in, first-out ("LIFO") basis at each plant, but report inventory externally on an annual LIFO basis in accordance with GAAP on a consolidated basis. This amount represents the conversion from GAAP LIFO applied on a consolidated basis for the Fabricated Products segment to monthly LIFO applied on a plant-by-plant basis.
2. 
The $2.6 million lower of cost or market inventory write-down in 2015 was due primarily to declining metal prices.
3. 
See Note 9 of Notes to Consolidated Financial Statements included in this Report for additional information relating to the environmental expenses.
As noted above, operating income excluding non-run-rate items for 2015 was $23.3 million higher than operating income excluding such items for 2014. Higher operating income excluding non-run-rate items primarily reflected a positive sales impact, partially offset by higher: (i) manufacturing conversion and other costs; (ii) overhead cost; (iii) other costs and (iv) depreciation expense. The positive sales impact of $33.7 million was due primarily to increased shipments of Automotive Extrusions, GE products and Aero/HS products and improved sales margins on certain Aero/HS and GE products reflecting improved spot pricing and lower contained metal costs. The $1.2 million increase in manufacturing conversion and other costs was due to approximately $5.2 million of inefficiencies in our automotive operations as we ramped up on several new automotive programs and responded to unexpectedly strong and volatile demand, as discussed in further detail in "Consolidated Results of Operations" above, largely offset by the improved manufacturing cost efficiencies in our operations other than automotive, including benefits derived from recent investments at our Trentwood facility. Overhead cost increased $5.4 million due to additional resources to support sizable growth in strategic served markets and increased wages. Other costs increased $3.0 million due primarily to higher employee incentive compensation. Depreciation expense increased $1.3 million.
Operating income excluding non-run-rate items for 2014 was $14.9 million lower than for 2013. Lower operating income excluding non-run-rate items in 2014 reflected: (i) a $32.6 million negative price impact due primarily to lower pricing for heat treat plate products; (ii) a positive volume impact of $16.6 million due primarily to increased shipments of Automotive Extrusions and Aero/HS products; (iii) $3.2 million of higher energy costs; (iv) $2.2 million of higher planned major maintenance expense; (v) $3.0 million of higher depreciation expense; and (vi) a net $9.5 million improvement in manufacturing conversion and other costs.
The table below provides shipment and value added revenue information (in millions of dollars except shipments and value added revenue per pound) for each of the product categories (which are based on end market applications) of our Fabricated Products segment for each period presented:

30



 
 
Year Ended December 31,
 
 
2015
 
2014
 
2013
Aero/HS Products:
 
 
 
 
 
 
 
 
 
 
 
 
Shipments (mmlbs)
 
243.5
 
236.9
 
224.3
 
 
$
 
$ / lb
 
$
 
$ / lb
 
$
 
$ / lb
Net sales
 
$
695.5

 
$
2.86

 
$
686.3

 
$
2.90

 
$
677.0

 
$
3.02

Less: hedged cost of alloyed metal
 
(246.4
)
 
(1.02
)
 
(256.1
)
 
(1.08
)
 
(227.8
)
 
(1.02
)
Value added revenue
 
$
449.1

 
$
1.84

 
$
430.2

 
$
1.82

 
$
449.2

 
$
2.00

 
 
 
 
 
 
 
 
 
 
 
 
 
Automotive Extrusions:
 
 
 
 
 
 
 
 
 
 
 
 
Shipments (mmlbs)
 
93.5
 
78.5
 
64.1
 
 
$
 
$ / lb
 
$
 
$ / lb
 
$
 
$ / lb
Net sales
 
$
199.2

 
$
2.13

 
$
173.5

 
$
2.21

 
$
129.5

 
$
2.02

Less: hedged cost of alloyed metal
 
(88.7
)
 
(0.95
)
 
(82.6
)
 
(1.05
)
 
(63.2
)
 
(0.99
)
Value added revenue
 
$
110.5

 
$
1.18

 
$
90.9

 
$
1.16

 
$
66.3

 
$
1.03

 
 
 
 
 
 
 
 
 
 
 
 
 
GE Products:
 
 
 
 
 
 
 
 
 
 
 
 
Shipments (mmlbs)
 
231.4
 
223.4
 
222.5
 
 
$
 
$ / lb
 
$
 
$ / lb
 
$
 
$ / lb
Net sales
 
$
426.1

 
$
1.84

 
$
419.5

 
$
1.88

 
$
411.0

 
$
1.85

Less: hedged cost of alloyed metal
 
(226.1
)
 
(0.98
)
 
(237.6
)
 
(1.07
)
 
(224.9
)
 
(1.01
)
Value added revenue
 
$
200.0

 
$
0.86

 
$
181.9

 
$
0.81

 
$
186.1

 
$
0.84

 
 
 
 
 
 
 
 
 
 
 
 
 
Other Products:
 
 
 
 
 
 
 
 
 
 
 
 
Shipments (mmlbs)
 
47.0
 
50.0
 
52.8
 
 
$
 
$ / lb
 
$
 
$ / lb
 
$
 
$ / lb
Net sales
 
$
71.1

 
$
1.51

 
$
76.8

 
$
1.54

 
$
80.0

 
$
1.52

Less: hedged cost of alloyed metal
 
(40.8
)
 
(0.87
)
 
(47.3
)
 
(0.95
)
 
(48.0
)
 
(0.91
)
Value added revenue
 
$
30.3

 
$
0.64

 
$
29.5

 
$
0.59

 
$
32.0

 
$
0.61

 
 
 
 
 
 
 
 
 
 
 
 
 
Total:
 
 
 
 
 
 
 
 
 
 
 
 
Shipments (mmlbs)
 
615.4
 
588.8
 
563.7
 
 
$
 
$ / lb
 
$
 
$ / lb
 
$
 
$ / lb
Net sales
 
$
1,391.9

 
$
2.26

 
$
1,356.1

 
$
2.30

 
$
1,297.5

 
$
2.30

Less: hedged cost of alloyed metal
 
(602.0
)
 
(0.98
)
 
(623.6
)
 
(1.06
)
 
(563.9
)
 
(1.00
)
Value added revenue
 
$
789.9

 
$
1.28

 
$
732.5

 
$
1.24

 
$
733.6

 
$
1.30

For 2015, Net sales of Fabricated Products increased by $35.8 million to $1,391.9 million, as compared to 2014, primarily reflecting a 5% increase in Fabricated Products segment shipment volume, partially offset by a 2% decrease in average realized sales price per pound. See "Consolidated Selected Operational and Financial Information" above for further discussion.
The increase in Net sales of Fabricated Products during 2014 compared to 2013 was due primarily to an increase in shipment volume and an increase in the hedged cost of alloyed metal prices, partially offset by a decrease in average value added revenue per pound. See "Consolidated Selected Operational and Financial Information" above for further discussion.

31



All Other
All Other provides support for our operations and incurs general and administrative expenses that are not allocated to the Fabricated Products segment. All Other is not considered a reportable segment. The table below presents the impact of non-run-rate items to operating loss within the All Other business unit for each period presented (in millions of dollars):
 
 
Year Ended
December 31,
 
 
2015
 
2014
 
2013
Operating loss
 
$
(536.7
)
 
$
(13.5
)
 
$
(15.3
)
Impact to operating loss of non-run-rate items:
 
 
 
 
 
 
Net periodic postretirement benefit (cost) income relating to the VEBAs1
 
(2.4
)
 
23.7

 
22.5

Loss on removal of Union VEBA net assets1,2
 
(493.4
)
 

 

Environmental income (expense)
 
0.4

 
0.4

 
(0.5
)
Workers' compensation benefit due to a change in discount rate3
 

 

 
0.2

Total non-run-rate items
 
(495.4
)
 
24.1

 
22.2

Operating loss excluding non-run-rate items
 
$
(41.3
)
 
$
(37.6
)
 
$
(37.5
)
_______________________
1. 
See Note 6 of Notes to Consolidated Financial Statements included in this Report for additional information relating to the VEBAs.
2. 
Our obligation to make variable contributions to the Union VEBA continues until September 30, 2017. This loss includes a liability of $46.7 million for the estimated remaining variable cash contributions to be made with respect to 2015, 2016 and the first nine months of 2017 (in each case paid in the following calendar year). See Note 6 for additional information regarding our estimated future variable cash contributions.
3. 
Amount represents a portion of the workers' compensation benefit (expense) resulting from the change in the discount rates applied in estimating workers' compensation liabilities. We consider such expense to be non-run-rate because such amounts are not related to the incurrence and resolution of workers' compensation claims. Non-run-rate workers' compensation benefit (expense) for years presented was not material because discount rates did not fluctuate significantly.
All Other operating loss excluding non-run-rate items for 2015 was $3.7 million higher than in 2014. The increase was due primarily to an increase of $1.5 million in employee long-term incentive compensation expense and $1.9 million in salaries and benefits.
All Other operating loss excluding non-run-rate items for 2014 was $0.1 million higher than in 2013. The increase was primarily due to an increase in corporate overhead, partially offset by a decrease in short-term employee incentive compensation expense.
Certain Information Related to Our Significant Tax Attributes
We have significant federal income tax attributes, including sizable net operating loss carryforwards. Under Section 382(l)(5) ("Section 382") of the Internal Revenue Code of 1986 ("Code"), our ability to use our federal income tax attributes following a more than 50% change in ownership during any period of 36 consecutive months, all as determined under the Code (an "ownership change"), would be limited annually to an amount equal to the product of: (i) the aggregate value of our outstanding common shares immediately prior to the ownership change and (ii) the applicable federal long-term tax exempt rate in effect on the date of the ownership change.
To reduce the risk that an ownership change under Section 382 would jeopardize our ability to fully use our federal income tax attributes, our certificate of incorporation prohibits certain transfers of our equity securities without the prior approval of our Board of Directors if either (a) the transferor holds 5% or more of the total fair market value of all of our issued and outstanding equity securities (such person, a "5% shareholder") or (b) as a result of such transfer, either: (i) any person or group of persons would become a 5% shareholder or (ii) the percentage stock ownership of any 5% shareholder would be increased (any such transfer, a "5% transaction"). These transfer restrictions, however, are scheduled to expire on July 6, 2016. We are evaluating alternatives with respect to the protection of our net operating loss carry-forwards from and after July 6, 2016.

32



Liquidity and Capital Resources
Summary
The following table summarizes our liquidity at the dates presented (in millions of dollars):
 
December 31, 2015
 
December 31, 2014
Available cash and cash equivalents
$
72.5

 
$
177.7

Short-term investments
30.0

 
114.0

Net borrowing availability under Revolving Credit Facility after borrowings and letters of credit
280.8

 
269.1

Total liquidity
$
383.3

 
$
560.8

Cash equivalents consist primarily of money market accounts and investments with an original maturity of 90 days or less when purchased. We place our cash in bank deposits and money market funds with high credit quality financial institutions, which invest primarily in commercial paper and time deposits of prime quality, short-term repurchase agreements and U.S. government agency notes. Short-term investments represent holdings in investment-grade commercial paper and corporate bonds with a maturity of greater than 90 days.
In addition to our unrestricted cash and cash equivalents described above, we have restricted cash that is pledged or held as collateral in connection with workers’ compensation requirements and certain other agreements. From time to time, such restricted funds could be returned to us or we could be required to pledge additional cash (see Note 2 of Notes to Consolidated Financial Statements included in this Report).
On December 1, 2015, we and certain of our subsidiaries amended and extended our credit agreement with JPMorgan Chase Bank, N.A., as administrative agent, and the other financial institutions party thereto ("Revolving Credit Facility") (see Note 3 of Notes to Consolidated Financial Statements included in this Report). There were no borrowings under our Revolving Credit Facility as of December 31, 2015 or December 31, 2014.


33



Cash Flows
The following table summarizes our cash flows from operating, investing and financing activities for each period presented (in millions of dollars):
 
 
Year Ended
December 31,
 
 
2015
 
2014
 
2013
Total cash provided by (used in):
 
 
 
 
 
 
Operating activities:
 
 
 
 
 
 
Fabricated Products
 
$
226.4

 
$
199.5

 
$
187.5

All Other
 
(67.6
)
 
(75.4
)
 
(75.8
)
Total cash provided by operating activities
 
$
158.8

 
$
124.1

 
$
111.7

 
 
 
 
 
 
 
Investing activities:
 
 
 
 
 
 
Fabricated Products
 
$
(62.4
)
 
$
(58.5
)
 
$
(69.8
)
All Other
 
82.8

 
13.8

 
(43.6
)
Total cash provided by (used in) investing activities
 
$
20.4

 
$
(44.7
)
 
$
(113.4
)
 
 
 
 
 
 
 
Financing activities:
 
 
 
 
 
 
Fabricated Products
 
$

 
$

 
$
(0.1
)
All Other
 
(284.4
)
 
(71.2
)
 
(102.1
)
Total cash used in financing activities
 
$
(284.4
)
 
$
(71.2
)
 
$
(102.2
)
Operating Activities
Fabricated Products – In 2015, Fabricated Products segment operating activities provided $226.4 million of cash. Cash provided in 2015 was primarily related to: (i) $190.8 million of operating income; (ii) adjustments for non-cash items and depreciation and amortization of $37.5 million and (iii) a decrease in accounts receivable of $17.0 million, partially offset by (iv) an increase in inventory of $4.9 million (net of a $2.6 million lower of cost or market charge) due primarily to increased shipment volume and (v) a decrease in accounts payable of $12.4 million due to the timing of payments and decreasing price of aluminum.
In 2014, Fabricated Products segment operating activities provided $199.5 million of cash. Cash provided in 2014 was primarily related to: (i) $151.4 million of operating income; (ii) adjustments for non-cash items and depreciation and amortization of $46.4 million; and (iii) an increase in accounts payable of $20.7 million due to an increase in general business activities and the timing of payments. Cash provided in 2014 was partially offset by: (i) an increase in accounts receivable of $7.7 million; (ii) a $5.0 million decrease in other accrued liabilities due primarily to a decrease in accrued salaries and wages; and (iii) a $6.1 million decrease in long-term liabilities due primarily to a decrease in workers' compensation and environmental accruals.
In 2013, Fabricated Products segment operating activities provided $187.5 million of cash. Cash provided in 2013 was primarily related to $188.6 million of operating income and $15.7 million of Canadian tax benefits, partially offset by $3.3 million of non-cash adjustments. Cash provided in 2013 also included an increase in accounts payable and other accrued liabilities of $2.1 million due to general business activities and the timing of payments, partially offset by an increase in accounts receivable of $7.9 million due partially to the recognition of a $4.4 million receivable relating to tax refunds from the Canada Revenue Agency, as well as increases in product shipments near year end and an increase in inventory of $4.4 million in anticipation of higher sales.
For additional information regarding Fabricated Products operating income excluding non-run-rate items, see "Results of Operations - Segment and Business Unit Information" above.
All Other – Cash used in operating activities was $67.6 million, $75.4 million and $75.8 million during 2015, 2014 and 2013, respectively. Cash outflow from All Other operating activities in 2015 consisted primarily of payments relating to: (i) general and administrative costs of $25.9 million; (ii) an annual variable cash contribution to the VEBAs of $13.7 million with respect to the 2014 year; (iii) our short-term incentive program in the amount of $3.4 million; (iv) interest on the Convertible

34



Notes, Senior Notes and Revolving Credit Facility of $22.1 million; and (v) a loss of $2.5 million on the repurchase of our Senior Notes.
Cash outflow from All Other operating activities in 2014 consisted primarily of payments relating to: (i) general and administrative costs of $29.9 million; (ii) an annual variable cash contribution to the VEBAs of $16.0 million with respect to 2013; (iii) our short-term incentive program in the amount of $4.3 million; and (iv) interest on the Convertible Notes Senior Notes and Revolving Credit Facility of $25.6 million in the aggregate. Cash outflow from All Other operating activities in 2013 consisted primarily of payments relating to: (i) general and administrative costs of $26.9 million; (ii) an annual variable cash contribution to the VEBAs of $20.0 million with respect to 2012; and (iii) interest on the Convertible Notes, Senior Notes and Revolving Credit Facility of $28.1 million in the aggregate.
Investing Activities
Fabricated Products – Cash used in investing activities for Fabricated Products was $62.4 million in 2015, compared to $58.5 million of cash used in 2014 and $69.8 million of cash used in 2013. Cash used in 2015, 2014 and 2013 was substantially related to capital expenditures. See "Capital Expenditures and Investments" below for additional information.
All Other – Cash provided by investing activities during 2015 of $82.8 million primarily consisted of proceeds from the disposition of available for sale securities. A portion of the proceeds was used to settle the Convertible Notes on April 1, 2015. Cash provided by investing activities during 2014 of $13.8 million consisted primarily of $14.7 million net cash inflow in conducting investment activities with respect to our available for sale securities, partially offset by $0.9 million of capital expenditures. Cash used in investing activities for All Other during 2013 of $43.6 million consisted primarily of $44.7 million net cash outflow relating to purchases and settlements of short-term investments and $0.6 million relating to capital expenditures, partially offset by cash deposit returns of $1.7 million related to workers' compensation insurance.
Financing Activities
Fabricated Products – No cash was used in financing activities for Fabricated Products in 2015 or 2014. Cash used in financing activities for Fabricated Products in 2013 was $0.1 million, relating to the repayment of a capital lease liability.
All Other – Cash used in financing activities in 2015 was $284.4 million, representing: (i) net cash outlay of $175.0 million to settle the Convertible Notes; (ii) $49.2 million of cash used to repurchase our common stock under our stock repurchase program; (iii) $28.1 million of cash dividends paid to our stockholders, including holders of restricted stock, and dividend equivalents paid to holders of certain restricted stock units and to holders of performance shares granted prior to 2014, with respect to the target number of underlying shares of common stock (constituting approximately one-half of the maximum payout); (iv) a $30.0 million payment related to the repurchase of $27.2 million aggregate principal amount of our Senior Notes; (v) $2.8 million of cash used to repurchase our common stock to satisfy withholding taxes resulting from the vesting of employee restricted stock, restricted stock units and performance shares; and (vi) $0.6 million of cash paid for financing costs related to the renewal of our Revolving Credit Facility. Cash used in financing activities in 2015 was partially offset by $1.3 million of additional tax benefit in connection with the vesting of employee non-vested shares, restricted stock units and performance shares.
Cash used in financing activities in 2014 was $71.2 million, representing: (i) $44.1 million of cash used to repurchase our common stock under our stock repurchase program; (ii) $25.4 million of cash dividends paid to our stockholders, including holders of restricted stock, and dividend equivalents paid to holders of certain restricted stock units and to holders of performance shares granted prior to 2014, with respect to the target number of underlying shares of common stock (constituting approximately one-half of the maximum payout); and (iii) $2.4 million of cash used to repurchase our common stock to satisfy withholding taxes resulting from the vesting of employee restricted stock, restricted stock units and performance shares. Cash used in financing activities in 2014 was partially offset by $0.8 million of additional tax benefit in connection with the vesting of employee non-vested shares, restricted stock units and performance shares.
Cash used in financing activities in 2013 was $102.1 million, representing primarily: (i) $78.3 million of cash used to repurchase our common stock under our stock repurchase program; (ii) $22.4 million of cash dividends paid to our stockholders (net of dividends returned), including holders of restricted stock, and dividend equivalents paid to holders of certain restricted stock units and to holders of performance shares with respect to the target number of underlying shares of common stock (constituting approximately one-half of the maximum payout); (iii) $2.5 million of cash used to repurchase our common stock to satisfy withholding taxes resulting from the vesting of employee restricted stock, restricted stock units and performance shares. Cash used in financing activities in 2013 was partially offset by $1.1 million of additional tax benefit in connection with the vesting of employee non-vested shares, restricted stock units and performance shares.

35



Sources of Liquidity
We believe our available cash and cash equivalents, short-term investments, borrowing availability under the Revolving Credit Facility and funds generated from operations are our most significant sources of liquidity. We believe these sources will be sufficient to finance our cash requirements and our planned capital expenditures and investments for at least the next 12 months. Nevertheless, our ability to fund our working capital requirements, debt service obligations, the full amount of any variable cash contribution to the VEBAs and planned capital expenditures and investments will depend upon our future operating performance (which will be affected by prevailing economic conditions) and financial, business and other factors, some of which are beyond our control.
The Revolving Credit Facility matures in December 2020 and provides for borrowings up to $300.0 million (subject to borrowing base limitations), of which up to a maximum of $20.0 million may be utilized for letters of credit. The Revolving Credit Facility may, subject to certain conditions and the agreement of lenders thereunder, be increased up to $400.0 million.
The table below summarizes recent availability and usage of our Revolving Credit Facility (in millions of dollars except for borrowing rate):
 
February 12, 2016
 
December 31, 2015
Revolving Credit Facility borrowing commitment
$
300.0

 
$
300.0

 
 
 
 
Borrowing base availability
$
293.2

 
$
288.1

Less: Outstanding borrowings under Revolving Credit Facility

 

Less: Outstanding letters of credit under Revolving Credit Facility
(7.3
)
 
(7.3
)
Net remaining borrowing availability
$
285.9

 
$
280.8

Borrowing rate (if applicable)1
3.75
%
 
3.75
%
_______________________
1. 
Such borrowing rate, if applicable, represents the interest rate for any overnight borrowings under the Revolving Credit Facility.
We do not believe that covenants contained in the Revolving Credit Facility are reasonably likely to limit our ability to raise additional debt or equity should we choose to do so during the next 12 months, nor do we believe it is likely that during the next 12 months we will trigger the availability threshold that would require measuring and maintaining a fixed charge coverage ratio.
See Note 3 of Notes to Consolidated Financial Statements included in this Report for a description of our Revolving Credit Facility.
Debt
See "Contractual Obligations, Commercial Commitments and Off-Balance Sheet and Other Arrangements - Contractual Obligations and Commercial Commitments" below for mandatory principal and cash interest payments on the outstanding borrowings under the Senior Notes. See Note 3 of Notes to Consolidated Financial Statements included in this Report for further details with respect to the Senior Notes.
We do not believe that covenants in the indenture governing the Senior Notes are reasonably likely to limit our ability to obtain additional debt or equity financing should we choose to do so during the next 12 months.

36



Capital Expenditures and Investments
A component of our long-term strategy is our capital expenditure program. We recently commenced a multi-year, $150.0 million capital investment project at our Trentwood facility focused on: (i) equipment upgrades throughout the process flow to reduce conversion costs and increase efficiency; (ii) modernizing our legacy equipment and process flow for thin gauge plate to achieve KaiserSelect® quality enhancements for these aerospace and general engineering products; and (iii) the further expansion of Trentwood’s manufacturing capacity.
Total capital expenditures were $63.1 million, $59.4 million and $70.4 million for 2015, 2014 and 2013, respectively. The majority of our capital spending during 2015 was to support new automotive programs that will launch over the next few years, with upgrades to existing extrusion presses at our London, Ontario, Sherman, Texas and Richmond, Virginia facilities, the addition of a new extrusion press at our London, Ontario facility that was in start-up at year-end 2015, and significant spending on a new extrusion press at our Sherman, Texas facility that will be in production later in 2016. Initial capital spending on the $150.0 million modernization project at our Trentwood facility also commenced in 2015. Capital spending during 2014 and 2013 was due primarily to spending on major projects at our Trentwood facility, including a new casting complex to expand our rolling ingot capacity and reduce costs and a project to further expand heat treat plate capacity. The remainder of our capital spending in 2015, 2014 and 2013 was spread among our manufacturing locations on projects expected to reduce operating costs, improve quality, increase capacity or enhance operational security.
In 2016, we anticipate capital spending will be in the $60.0 million to $80.0 million range for purposes of: (i) continuing our capacity expansions for Automotive Extrusions; (ii) continued spending on the $150.0 million modernization project at our Trentwood facility; (iii) other manufacturing cost efficiency and quality initiatives; and (iv) sustaining capital spending. Capital investment will be funded using cash generated from operations, available cash and cash equivalents, short-term investments, borrowings under the Revolving Credit Facility and/or other third-party financing arrangements. The level of anticipated capital expenditures may be adjusted from time to time depending on our business plans, our price outlook for fabricated aluminum products, our ability to maintain adequate liquidity and other factors. No assurance can be provided as to the timing of any such expenditures or the operational benefits expected therefrom.
Dividends
See Note 12 of Notes to Consolidated Financial Statements included in this Report for information regarding dividends paid during 2015, 2014 and 2013. See Item 5 of this Report for disclosure regarding the future declaration and payment of dividends.
Repurchases of Common Stock
See Note 12 of Notes to Consolidated Financial Statements included in this Report and Item 5 of this Report for information regarding repurchases of common stock in 2015 and 2014 and the amounts authorized and available for future repurchases of common stock under our stock repurchase program.
See Note 8 of Notes to Consolidated Financial Statements included in this Report for information regarding minimum statutory tax withholding obligations arising during 2015, 2014 and 2013 in connection with the vesting of non-vested shares, restricted stock units and performance shares.
Restrictions Related to Equity Capital
As discussed in "Certain Information Related to Our Significant Tax Attributes" above and elsewhere in this Report, our certificate of incorporation places restrictions on the transfer of our common shares. These restrictions are intended to reduce the risk that an ownership change within the criteria under Section 382 would jeopardize our ability to fully use our federal income tax attributes. These transfer restrictions will expire in accordance with their terms on July 6, 2016. We are evaluating alternatives with respect to the protection of our federal income tax attributes from and after July 6, 2016.
Environmental Commitments and Contingencies
See Note 9 of Notes to Consolidated Financial Statements included in this Report for information regarding our environmental commitments and contingencies.
Repurchase of Senior Notes
See Note 3 of Notes to Consolidated Financial Statements included in this Report for information regarding the repurchase of Senior Notes in 2015.

37



Contractual Obligations, Commercial Commitments and Off-Balance Sheet and Other Arrangements
Contractual Obligations and Commercial Commitments
We are obligated to make future payments under various contracts such as long-term purchase obligations and lease agreements. We have grouped these contractual obligations into operating activities, investing activities and financing activities in the same manner as they are classified in our Statements of Consolidated Cash Flows included in Item 8. "Financial Statements and Supplemental Data" in order to provide a better understanding of the nature of the obligations and to provide a basis for comparison to historical information.
The following table provides a summary of our significant contractual obligations at December 31, 2015 (in millions of dollars):
 
 
 
 
Payments Due by Period
 
 
Total
 
2016
 
2017
 
2018
 
2019
 
2020
 
2021 and Thereafter
Operating activities:1
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Purchase obligations
 
$
207.4

 
$
189.6

 
$
9.5

 
$
5.6

 
$
0.6

 
$
0.6

 
$
1.5

Operating leases
 
47.3

 
6.2

 
5.1

 
4.1

 
3.9

 
2.2

 
25.8

VEBA payments2
 
51.0

 
19.9

 
17.4

 
13.1

 
0.3

 
0.3

 

Standby letters of credit3
 
7.7

 
6.1

 
1.6

 

 

 

 

Uncertain tax liabilities4
 
0.7

 

 

 

 

 

 

Deferred compensation plan liability5
 
7.7

 

 

 

 

 

 

Investing activities:6
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Capital equipment
 
5.3

 
5.2

 
0.1

 

 

 

 

Financing activities:7
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Principal on the Senior Notes
 
197.8

 

 

 

 

 
197.8

 

Interest on the Senior Notes8
 
73.4

 
16.3

 
16.3

 
16.3

 
16.3

 
8.2

 

Commitment fees on the Revolving Credit Facility9
 
5.5

 
1.1

 
1.1

 
1.1

 
1.1

 
1.1

 

Total contractual obligations6
 
$
603.8

 
$
244.4

 
$
51.1

 
$
40.2

 
$
22.2

 
$
210.2

 
$
27.3

__________________________
1. 
See "Obligations for Operating Activities" below.
2. 
Total contractual obligations include: (i) the annual administration fees to the VEBAs; (ii) variable cash contribution to the VEBAs to be made in the first quarter of 2016 with respect to the 2015 calendar year; and (iii) estimated future annual variable cash contributions to the Union VEBA that we recorded as a result of settlement accounting, which are subject to change until the close of each respective calendar year. See Note 6 of Notes to Consolidated Financial Statements included in this Report for a description of our annual variable cash obligations to the VEBAs.
3. 
Of the $7.7 million of standby letters of credit, $0.4 million represents cash collateralized and $7.3 million represents letters of credit issued under our Revolving Credit Facility. The letters of credit provide financial assurance of our payment of obligations, primarily related to workers' compensation and environmental compliance. The specific timing of payments with respect to such matters is uncertain. The letters of credit generally automatically renew every 12 months and terminate when the underlying obligations no longer require assurance or upon the maturity of our Revolving Credit Facility in September 2020 (for those letters of credit issued under that facility).
4. 
At December 31, 2015, we had uncertain tax positions which ultimately could result in tax payments. As the amount of ultimate tax payments beyond 2016 is contingent on the tax authorities’ assessment, it is not practical to present annual payment information.
5. 
The amount represents liability relating to our deferred compensation plan for certain key employees. As the distribution amount is contingent upon vesting and other eligibility requirements, it is not practical to present annual payment information.
6. 
See "Obligations for Investing Activities" below.

38



7. 
See "Obligations for Financing Activities" below.
8. 
Interest obligations on the Senior Notes are based on scheduled interest payments.
9. 
Future commitment fees are estimated based on the amount of unused credit under our Revolving Credit Facility at December 31, 2015 and assuming no extension of terms beyond the current maturity date of our Revolving Credit Facility, which is in December 2020.
Obligations for Operating Activities
Cash outlays for operating activities primarily consist of purchase obligations with respect to primary aluminum, other raw materials and electricity and payment obligations under operating leases.
We have various contracts with suppliers of aluminum that require us to purchase minimum quantities of aluminum in future years at a price to be determined at the time of purchase based primarily on the underlying metal price at that time. Amounts included in the table are based on minimum quantities at the metal price at December 31, 2015. We believe the minimum quantities are lower than our current requirements for aluminum. Actual quantities and actual metal prices at the time of purchase could be different.
Operating leases represent multi-year obligations for certain manufacturing facilities, warehouses, office space and equipment.
Our primary financial obligation to the VEBAs is to make an annual variable cash contribution. The amount to be contributed to the two VEBAs pursuant to our obligation is 10% of the first $20.0 million of annual cash flow (as defined; in general terms, the principal elements of cash flow are earnings before interest expense, provision for income taxes and depreciation and amortization less cash payments for, among other things, interest, income taxes and capital expenditures), plus 20% of annual cash flow, as defined, in excess of $20.0 million. Annual contribution payments are allocated 85% to the Union VEBA and 15% to the other VEBA ("Salaried VEBA"). Such annual payments to the two VEBAs are limited (with no carryover to future years) to the extent that the payments would cause our liquidity to be less than $50.0 million and may not exceed $20.0 million ($17.1 million annually for the Union VEBA and $2.9 million annually for the Salaried VEBA). Our obligation to make annual contributions to the Union VEBA terminates on September 30, 2017 and our obligation to the Salaried VEBA has no express termination date. As of December 31, 2015, we determined that the variable cash contribution to the two VEBAs for 2015 was $19.6 million. See Note 6 of Notes to Consolidated Financial Statements included in this Report for information regarding the VEBAs and the effect they had on our consolidated financial statements.
See Note 6 of Notes to Consolidated Financial Statements included in this Report for information regarding our employee benefit plans, including defined contribution plans and defined benefit plans.
Obligations for Investing Activities
Capital project spending included in the preceding table represents non-cancelable capital commitments as of December 31, 2015. We expect capital projects to be funded through available cash generated from our operations, cash and cash equivalents, short-term investments, borrowings under our Revolving Credit Facility and/or other third-party financing arrangements.
Obligations for Financing Activities
Cash outlays for financing activities consist of our principal obligations under long-term debt, scheduled interest payments on the Senior Notes and commitment fees under our Revolving Credit Facility. No borrowings were outstanding under our Revolving Credit Facility either throughout the year or as of December 31, 2015.
Off-Balance Sheet and Other Arrangements
See Note 7 of Notes to Consolidated Financial Statements included in this Report for information regarding our participation in multi-employer pension plans.
See Note 8 of Notes to Consolidated Financial Statements included in this Report for information regarding our employee incentive plans. Additional equity awards are expected to be made to employees and non-employee directors in 2016 and future years.

39



Critical Accounting Estimates and Policies
Our consolidated financial statements are prepared in accordance with GAAP. In connection with the preparation of our financial statements, we are required to make assumptions and estimates about future events and apply judgments that affect the reported amounts of assets, liabilities, revenue and expenses and the related disclosures. We base our assumptions, estimates and judgments on historical experience, current trends and other factors that management believes to be relevant at the time our consolidated financial statements are prepared. On a regular basis, management reviews the accounting policies, assumptions, estimates and judgments to ensure that our financial statements are presented fairly and in accordance with GAAP. However, because future events and their effects cannot be determined with certainty, actual results could differ from our assumptions and estimates and such differences could be material.
Our significant accounting policies are discussed in Note 1 of Notes to Consolidated Financial Statements included in this Report. Management believes that the following accounting estimates are the most critical to aid in fully understanding and evaluating our reported financial results and require management’s most difficult, subjective or complex judgments, resulting from the need to make estimates about the effects of matters that are inherently uncertain. Management has reviewed these critical accounting estimates and related disclosures with the Audit Committee of our Board of Directors.

40



Description
 
Judgments and Uncertainties
 
Potential Effect if Actual Results
Differ From Assumptions
Our judgments and estimates with respect to environmental commitments and contingencies.
 
 
 
 
 
 
 
 
 
We are subject to a number of environmental laws and regulations, to potential fines or penalties assessed for alleged breaches of such laws and regulations and to potential claims and litigation based upon such laws and regulations. Based on our evaluation of environmental matters, we have established environmental accruals, primarily related to potential solid waste disposal and soil and groundwater remediation matters. These environmental accruals represent our estimate of costs reasonably expected to be incurred on a going concern basis in the ordinary course of business based on presently enacted laws and regulations, currently available facts, existing technology and our assessment of the likely remediation action to be taken.

See Note 9 of Notes to Consolidated Financial Statements included in this Report for additional information on our environmental contingencies.
 
Making estimates of possible incremental environmental remediation costs is subject to inherent uncertainties. In estimating the amount of any loss, in many instances a single estimation of the loss may not be possible. Rather, we may only be able to estimate a range for possible losses. In such an event, GAAP requires that a liability be established for at least the minimum end of the range assuming that there is no other amount which is more likely to occur. As additional facts are developed and definitive remediation plans and necessary regulatory approvals for implementation of remediation are established or alternative technologies are developed, changes in these and other factors may result in actual costs exceeding the current environmental accruals.
 
Although we believe that the judgments and estimates discussed herein are reasonable, actual results could differ and we may be exposed to losses or gains that could be materially different than those reflected in our accruals. To the extent we prevail in matters for which accruals have been established or are required to pay amounts in excess of our accruals, our future results from operations could be materially affected.
 
 
 
 
 
Our judgments and estimates with respect to legal and other commitments and contingencies.
 
 
 
 
 
 
 
 
 
Valuation of legal and other contingent claims is subject to a great deal of judgment and substantial uncertainty. Under GAAP, companies are required to accrue for loss contingencies in their financial statements only if both: (i) the potential loss is "probable" and (ii) the amount (or a range) of probable loss is "estimable." In reaching a determination of the probability of an adverse ruling in a matter, we typically consult outside experts. However, any such judgments reached regarding probability are subject to significant uncertainty. We may, in fact, obtain an adverse ruling in a matter that we did not consider a "probable" loss or "estimable" and which, therefore, was not accrued for in our financial statements. Additionally, facts and circumstances can change causing key assumptions that were used in previous assessments of a matter to change.
 
In estimating the amount of any loss, in many instances a single estimation of the loss may not be possible. Rather, we may only be able to estimate a range for possible losses. In such an event, GAAP requires that a liability be established for at least the minimum end of the range assuming that there is no other amount which is more likely to occur.
 
Although we believe that the judgments and estimates discussed herein are reasonable, actual results could differ and we may be exposed to losses or gains that could be materially different than those reflected in our accruals. To the extent we prevail in matters for which accruals have been established or are required to pay amounts in excess of our accruals, our future results from operations could be materially affected.
 
 
 
 
 

41



Description
 
Judgments and Uncertainties
 
Potential Effect if Actual Results
Differ From Assumptions
Our judgments and estimates with respect to conditional asset retirement obligations.
 
 
 
 
 
 
 
 
 
We recognize conditional asset retirement obligations ("CAROs") related to legal obligations associated with the normal operations of certain of our facilities. These CAROs consist primarily of incremental costs that would be associated with the removal and disposal of asbestos (all of which is believed to be fully contained and encapsulated within walls, floors, ceilings or piping) of certain of our older facilities if such facilities were to undergo major renovation or be demolished. There are currently plans for such renovation or demolition at certain facilities and management’s current assessment is that certain immaterial CAROs may be triggered during the next three years. For locations where there are no current plans for renovations or demolitions, the most probable scenario is such CAROs would not be triggered for 15 to 20 or more years, if at all.
Under current accounting guidelines, liabilities and costs for CAROs must be recognized in a company’s financial statements even if it is unclear when or if the CARO will be triggered. If it is unclear when or if a CARO will be triggered, companies are required to use probability weighting for possible timing scenarios to determine the probability-weighted amounts that should be recognized in the company’s financial statements.

 
The estimation of CAROs is subject to a number of inherent uncertainties including: (i) the timing of when any such CARO may be incurred; (ii) the ability to accurately identify all materials that may require special handling or treatment; (iii) the ability to reasonably estimate the total incremental special handling and other costs; (iv) the ability to assess the relative probability of different scenarios which could give rise to a CARO; and (v) other factors outside a company’s control including changes in regulations, costs and interest rates. As such, actual costs and the timing of such costs may vary significantly from the estimates, judgments and probable scenarios we considered, which could, in turn, have a material impact on our future financial statements.
 
Although we believe that the judgments and estimates discussed herein are reasonable, actual results could differ and we may be exposed to losses or gains that could be materially different than those reflected in our accruals.
 
 
 
 
 

42



Description
 
Judgments and Uncertainties
 
Potential Effect if Actual Results
Differ From Assumptions
Our judgments and estimates with respect to self-insured workers' compensation liabilities.
 
 
 
 
 
 
 
 
 
We are primarily self-insured for workers' compensation benefits provided to employees. Workers' compensation liabilities are estimated for incurred-but-not-reported claims based on judgment, using our historical claims data and information and analysis provided by actuarial and claim advisors, our insurance carriers and other professionals. We account for accrued liability relating to workers' compensation claims on a discounted basis.
 
The accounting for our self-insured workers' compensation plan involves estimates and judgments to determine our ultimate liability related to reported claims and incurred-but-not-reported claims. We consider our historical experience, severity factors, actuarial analysis and existing stop loss insurance in estimating our ultimate insurance liability. In addition, since recorded obligations represent the present value of expected payments over the life of the claims, decreases in the discount rate (used to compute the present value of the payments) would cause the estimated obligations to increase. Conversely, an increase in the discount rate would cause the estimated present value of expected payments to decrease. If our workers' compensation claim trends were to differ significantly from our historic claims experience and as the discount rate changes, we would make a corresponding adjustment to our workers' compensation accruals.

 
The rate used to discount future estimated workers' compensation liabilities is determined based on the U.S. Treasury bond rate with a five-year maturity date which resembles the remaining estimated life of the workers' compensation claims. A change in the discount rate of 1/4 of 1% would impact the workers' compensation liability and operating income by approximately $0.2 million.

43



Description
 
Judgments and Uncertainties
 
Potential Effect if Actual Results
Differ From Assumptions
Long-Lived Assets.
 
 
 
 
 
 
 
 
 
Long-lived assets other than goodwill and indefinite-lived intangible assets, which are separately tested for impairment, are evaluated for impairment whenever events or changes in circumstances indicate that the carrying value may not be recoverable. When evaluating long-lived assets for potential impairment, we first compare the carrying value of the asset to the asset’s estimated future cash flows (undiscounted and without interest charges). If the estimated future cash flows are less than the carrying value of the asset, we calculate an impairment loss. The impairment loss calculation compares the fair value, which may be based on estimated future cash flows (discounted and with interest charges) to the asset’s carrying value. We recognize an impairment loss if the amount of the asset’s carrying value exceeds the asset's estimated fair value. If we recognize an impairment loss, the adjusted carrying amount of the asset becomes its new cost basis. For a depreciable long-lived asset, the new cost basis will be depreciated (amortized) over the remaining useful life of that asset.
 
Our impairment loss calculations contain uncertainties because they require management to make assumptions and apply judgment to estimate future cash flows and asset fair values, including forecasting useful lives of the assets and selecting the discount rate that reflects the risk inherent in future cash flows.
 
We have not made any material changes in our impairment loss assessment methodology.

We do not believe there is a reasonable likelihood that there will be a material change in the estimates or assumptions we use to calculate long-lived asset impairment losses. However, if actual results are not consistent with our estimates and assumptions used in estimating future cash flows and asset fair values, we may be exposed to further losses from impairment charges that could be material.

See Note 1 of Notes to Consolidated Financial Statements included in this Report for information regarding impairment charges taken on property, plant and equipment.

44



Description
 
Judgments and Uncertainties
 
Potential Effect if Actual Results
Differ From Assumptions
Income Tax.
 
 
 
 
 
 
 
 
 
We have substantial tax attributes available to offset the impact of future income taxes. We have a process for determining the need for a valuation allowance with respect to these attributes. The process includes an extensive review of both positive and negative evidence including our earnings history, future earnings, adverse recent occurrences, carryforward periods, an assessment of the industry and the impact of the timing differences.

We expect to record a full statutory tax provision in future periods and, therefore, the benefit of any tax attributes realized will only affect future balance sheets and statements of cash flows.

In accordance with GAAP, financial statements for interim periods include an income tax provision based on the effective tax rate expected to be incurred in the current year.
 
Inherent within the completion of our assessment of the need for a valuation allowance, we make significant judgments and estimates with respect to future operating results, timing of the reversal of deferred tax assets and current market and industry factors. In order to determine the effective tax rate to apply to interim periods, estimates and judgments are made (by taxable jurisdiction) as to the amount of taxable income that may be generated, the availability of deductions and credits expected and the availability of net operating loss carryforwards or other tax attributes to offset taxable income.

Making such estimates and judgments is subject to inherent uncertainties given the difficulty of predicting future market conditions, customer requirements, the cost for key inputs such as energy and primary aluminum, overall operating efficiency and other factors. However, if, among other things: (i) actual results vary from our forecasts due to one or more of the factors cited above or elsewhere in this Report; (ii) income is distributed differently than expected among tax jurisdictions; (iii) one or more material events or transactions occur which were not contemplated; or (iv) certain expected deductions, credits or carryforwards are not available, it is possible that the effective tax rate for a year could vary materially from the assessments used to prepare the interim consolidated financial statements. See Note 5 of Notes to Consolidated Financial Statements included in this Report for additional discussion of these matters.
 
Although we believe that the judgments and estimates discussed herein are reasonable, actual results could differ and we may be exposed to losses or gains that could be material. A change in our effective tax rate by 1% would have had an impact of approximately $3.7 million to Net loss for the year ended December 31, 2015.
 
 
 
 
 

45



Description
 
Judgments and Uncertainties
 
Potential Effect if Actual Results
Differ From Assumptions
Tax Contingencies.
 
 
 
 
 
 
 
 
 
We use a "more likely than not" threshold for recognition of tax attributes that are subject to uncertainties and measure reserves in respect of such expected benefits based on their probability. A number of years may elapse before a particular matter for which we have established a reserve is audited and fully resolved or clarified. We adjust our tax reserve and income tax provision in the period in which actual results of a settlement with tax authorities differs from our established reserve, the statute of limitations expires for the relevant tax authority to examine the tax position or when more information becomes available. See Note 5 of Notes to Consolidated Financial Statements included in this Report for additional information on the recognition of tax attributes.
 
Our reserve for contingent tax liabilities reflects uncertainties because management is required to make assumptions and to apply judgment to estimate the exposures associated with our various filing positions.

Our effective income tax rate is also affected by changes in tax law, the tax jurisdiction of new plants or business ventures, the level of earnings and the results of tax audits.
 
Although we believe that the judgments and estimates discussed herein are reasonable, actual results could differ and we may be exposed to losses or gains that could be material.

To the extent we prevail in matters for which reserves have been established or are required to pay amounts in excess of our reserves, our effective income tax rate in a given financial statement period could be materially affected. An unfavorable tax settlement could require use of our cash and would result in an increase in our effective income tax rate in the period of resolution. A favorable tax settlement would be recognized as a reduction in our effective income tax rate in the period of resolution.

Our liability related to uncertain tax positions at December 31, 2015 was $0.7 million.
 
 
 
 
 
Inventory Valuation.
 
 
 
 
 
 
 
 
 
We value our inventories at the lower of cost or market value. For the Fabricated Products segment, finished products, work-in-process and raw material inventories are stated on a LIFO basis and other inventories, principally operating supplies and repair and maintenance parts, are stated at average cost.

Inventory costs consist of material, labor and manufacturing overhead, including depreciation. Abnormal costs, such as idle facility expenses, freight, handling costs and spoilage, are accounted for as current period charges. We determine the market value of our inventories based on the current replacement cost, by purchase or by reproduction, except that it does not exceed the net realizable value and it is not less than net realizable value reduced by an approximate normal profit margin.
 
Our estimate of the market value of our inventories contains uncertainties because management is required to make assumptions and to apply judgment to estimate the selling price of our inventories, costs to complete our inventories and normal profit margin.

Making such estimates and judgments is subject to inherent uncertainties given the difficulty predicting such factors as future commodity prices and market conditions.
 
Although we believe that the judgments and estimates discussed herein are reasonable, actual results could differ and we may be exposed to losses or gains that could be material.

46



Description
 
Judgments and Uncertainties
 
Potential Effect if Actual Results
Differ From Assumptions
Acquisitions, Goodwill and Intangible Assets.
 
 
 
 
 
 
 
 
 
We accounted for acquisitions using the acquisition method of accounting, which requires the assets acquired and liabilities assumed to be recorded at the date of acquisition at their respective estimated fair values.

We recognize goodwill as of the acquisition date, as a residual over the fair values of the identifiable net assets acquired. Goodwill is tested for impairment on an annual basis as well as on an interim basis as events and changes in circumstances occur.

Definite-lived intangible assets acquired are amortized over the estimated useful lives of the respective assets, to reflect the pattern in which the economic benefits of the intangible assets are consumed. In the event the pattern cannot be reliably determined, we use a straight-line amortization method. Whenever events or changes in circumstances indicate that the carrying amount of the intangible assets may not be recoverable, the intangible assets will be reviewed for impairment.
 
The judgments made in determining the estimated fair value assigned to each class of assets acquired and liabilities assumed, as well as asset lives, can significantly impact our results of operations. Fair values and useful lives are determined based on, among other factors, the expected future period of benefit of the asset, the various characteristics of the asset and projected cash flows. As the determination of an asset’s fair value and useful life involves management making certain estimates and because these estimates form the basis for the determination of whether or not an impairment charge should be recorded, these estimates are considered to be critical accounting estimates.
 
We do not believe there is a reasonable likelihood that there will be a material change in the estimates or assumptions we use to calculate goodwill and intangible assets. Additionally, as of December 31, 2015, we do not believe any of our reporting units are at risk of failing step one of the two-step goodwill impairment test. However, if actual results are not consistent with our estimates and assumptions used in estimating future cash flows and fair values assigned to each class of assets acquired and liabilities assumed, we may be exposed to losses from impairment charges that could be material.
 
 
 
 
 

47



Description
 
Judgments and Uncertainties
 
Potential Effect if Actual Results
Differ From Assumptions
Our judgments and estimates with respect to the Salaried VEBA and the Canadian defined benefit plan.
 
 
 
 
 
 
 
 
 
At December 31, 2015, our financial statements include: (i) the Salaried VEBA, which we are required to reflect on our financial statements as a defined benefit postretirement plan, despite our limited legal obligations to the Salaried VEBA in regards to that plan and (ii) a pension plan for our Canadian salaried employees. Liabilities and expenses for pension and other postretirement benefits are determined using actuarial methodologies and incorporate significant assumptions, including the rate used to discount the future estimated liability, the long-term rate of return ("LTRR") on plan assets and several assumptions relating to the employee workforce (i.e., salary increases, retirement age and mortality). The most significant assumptions used in determining the estimated year-end obligations include the assumed discount rate and the LTRR.

In addition to the above assumptions used in the actuarial valuation, changes in plan provisions could also have a material impact on the net funded status of the Salaried VEBA. Our obligation to the Salaried VEBA is to pay an annual variable contribution amount based on the level of our cash flow. The funding status of the Salaried VEBA has no impact on our annual variable contribution amount. We have no control over any aspect of the plan. We rely on information provided to us by the Salaried VEBA administrator with respect to specific plan provisions such as annual benefits expected to be paid. See Note 6 of Notes to Consolidated Financial Statements included in this Report for additional information on our benefit plans.
 
Since recorded obligations represent the present value of expected pension and postretirement benefit payments over the life of the plans, decreases in the discount rate (used to compute the present value of the payments) would cause the estimated obligations to increase. Conversely, an increase in the discount rate would cause the estimated present value of the obligations to decline.

The LTRR on plan assets reflects an assumption regarding what the amount of earnings would be on existing plan assets (before considering any future contributions to the plans). Increases in the assumed LTRR would cause the projected value of plan assets available to satisfy pension and postretirement obligations to increase, yielding a reduced net expense of these obligations. A reduction in the LTRR would reduce the amount of projected net assets available to satisfy pension and postretirement obligations and, thus, cause the net expense of these obligations to increase.

A change in plan provisions could cause the estimated obligations to change. An increase in annual benefits expected to be paid would increase the estimated present value of the obligations and conversely, a decrease in annual benefits expected to be paid would decrease the estimated present value of the obligations.
 
The rate used to discount future estimated liabilities is determined taking into consideration the rates available at year end on debt instruments that could be used to settle the obligations of the plan. In relation to the Salaried VEBA, a change in the discount rate of 1/4 of 1% would impact the accumulated postretirement benefit obligation by approximately $1.6 million, impact service and interest costs by $0.1 million and have an immaterial impact on 2016 expense. The LTRR on plan assets is estimated by considering historical returns and expected returns on current and projected asset allocations. A change in the assumption for LTRR on plan assets of 1/4 of 1% would impact expense by approximately $0.1 million in 2016 in relation to the Salaried VEBA.

A change in the discount rate of 1/4 of 1% would have an immaterial impact on the Canadian pension plan.
 
 
 
 
 
New Accounting Pronouncements
For a discussion of all recently adopted and recently issued but not yet adopted accounting pronouncements, see Note 1 of Notes to Consolidated Financial Statements included in this Report.
Item 7A. Quantitative and Qualitative Disclosures About Market Risk
Our operating results are sensitive to changes in the prices of primary aluminum and fabricated aluminum products and also depend to a significant degree upon the volume and mix of all products sold. As discussed more fully in Note 10 of Notes to Consolidated Financial Statements included in this Report, we have historically utilized hedging transactions to lock in a

48



specified price or range of prices for certain products which we sell or consume in our production process and to mitigate our exposure to changes in energy prices and foreign currency exchange rates.
Aluminum
See Note 10 of Notes to Consolidated Financial Statements included in this Report, under "Hedges of Operational Risk" for a discussion of our pricing of fabricated aluminum, firm-price arrangements and third-party hedging instruments.
In 2015, 2014 and 2013, settlements of derivative contracts covering, in millions of pounds, 204.6, 138.3 and 119.8, respectively, hedged Fabricated Products shipments sold on pricing terms that created metal price risk for us. At December 31, 2015, we had derivative contracts with respect to approximately, in millions of pounds, 129.9 and 4.8 to hedge sales to be made in 2016 and 2017, respectively, on pricing terms that create metal price risk for us.
Based on the aluminum derivative positions held by us to hedge firm-price customer sales agreements, we estimate that a $0.10 per pound decrease in the London Metal Exchange market price of aluminum as of December 31, 2015 and December 31, 2014, with all other variables held constant, would have resulted in an unrealized mark-to-market loss of $12.9 million and $6.7 million, respectively, with corresponding changes to the net fair value of our aluminum derivative positions. Additionally, we estimate that a $0.01 per pound decrease in the Midwest premium for aluminum as of December 31, 2015 and December 31, 2014, with all other variables held constant, would have resulted in an unrealized mark-to-market loss of $0.8 million and $0.7 million, respectively. The balances of such financial instruments may change in future periods and therefore the amounts discussed above may not be indicative of future results.

If we continue to encounter reductions in the price of aluminum and/or if we experience a decrease in our net realizable
value of inventory, we may be subject to additional inventory lower of cost or market value adjustments.
Energy
We are exposed to energy price risk from fluctuating prices for natural gas and electricity. We estimate that, before consideration of any hedging activities and the potential to pass through higher natural gas and electricity prices to customers, each $1.00 change in natural gas prices (per mmBtu) and electricity prices (per mwh) would impact our 2016 annual operating costs by approximately $4.3 million and $0.5 million, respectively. We, from time to time, in the ordinary course of business, enter into hedging transactions and/or physical delivery commitments with third parties to mitigate our risk from fluctuations in natural gas and electricity prices.
As of December 31, 2015, we had derivative and/or physical delivery commitments with energy companies in place to cover our exposure to fluctuations in natural gas prices for approximately 73%, 72% and 59% of the expected natural gas purchases for 2016, 2017 and 2018, respectively. We estimate that a $1.00 per mmbtu decrease in natural gas prices as of December 31, 2015 and December 31, 2014 would have resulted in an unrealized mark-to-market loss of $7.0 million and $6.7 million, respectively, with corresponding changes to the net fair value of our natural gas derivative positions.
Additionally, as of December 31, 2015, we had physical delivery commitments with energy companies, in place to cover our exposure to fluctuations in electricity prices for approximately 55% of the expected electricity purchases for both 2016 and 2017.
The balances of such financial instruments for hedging of natural gas and electricity may change in future periods however, and therefore the amounts discussed above may not be indicative of future results.
Foreign Currency
Our primary foreign exchange exposure is the operating costs of our London, Ontario facility. A 10% change in the Canadian dollar exchange rate is estimated to have an annual operating cost impact of $1.5 million. Additionally, during the year ended December 31, 2015, we entered into cash commitments for an equipment purchase denominated in euros and hedged our exposure to currency exchange rate fluctuations by entering into foreign currency forward contracts with settlement dates designed to line up with the timing of scheduled payments to the foreign equipment manufacturer. These derivative instruments are designated and qualify as cash flow hedges; therefore, periodic gains and losses related to market value adjustments are deferred in Accumulated other comprehensive loss until depreciation on the underlying equipment commences. See Note 10 of Notes to Consolidated Financial Statements included in this Report for additional information relating to these foreign currency forward contracts. As of December 31, 2015, we hedged our equipment purchase transactions denominated in euros using forward contracts with settlement dates through December 2016. We estimate that a 10% decrease in the December 31, 2015 exchange rate of euros to US dollars would have resulted in an unrealized mark-to-market loss of $0.5 million.

49



KAISER ALUMINUM CORPORATION AND SUBSIDIARY COMPANIES
Item 8. Financial Statements and Supplementary Data
Report of Independent Registered Public Accounting Firm
 
 
Consolidated Balance Sheets
 
 
Statements of Consolidated (Loss) Income
 
 
Statements of Consolidated Comprehensive (Loss) Income
 
 
Statements of Consolidated Stockholders’ Equity
 
 
Statements of Consolidated Cash Flows
 
 
Notes to Consolidated Financial Statements


50



KAISER ALUMINUM CORPORATION AND SUBSIDIARY COMPANIES
REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Stockholders of
Kaiser Aluminum Corporation
Foothill Ranch, California

We have audited the accompanying consolidated balance sheets of Kaiser Aluminum Corporation and Subsidiary Companies (the "Company") as of December 31, 2015 and 2014, and the related consolidated statements of (loss) income, comprehensive (loss) income, stockholders' equity, and cash flows for each of the three years in the period ended December 31, 2015. We also have audited the Company's internal control over financial reporting as of December 31, 2015, based on criteria established in Internal Control-Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission. The Company's management is responsible for these consolidated financial statements, for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management's Annual Report on internal control over financial reporting. Our responsibility is to express an opinion on these consolidated financial statements and an opinion on the Company's internal control over financial reporting based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement and whether effective internal control over financial reporting was maintained, in all material respects. Our audits of the consolidated financial statements included examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, and evaluating the overall consolidated financial statement presentation. Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audits also included performing such other procedures, as we considered necessary in the circumstances. We believe that our audits provide a reasonable basis for our opinions.

A company's internal control over financial reporting is a process designed by, or under the supervision of, the Company's principal executive and principal financial officers, or persons performing similar functions, and effected by the Company's board of directors, management, and other personnel to provide reasonable assurance regarding the reliability of financial reporting and the preparation of consolidated financial statements for external purposes in accordance with accounting principles generally accepted in the United States of America ("generally accepted accounting principles"). A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the Company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of consolidated financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the Company are being made only in accordance with authorizations of management and directors of the Company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the Company's assets that could have a material effect on the consolidated financial statements.

Because of the inherent limitations of internal control over financial reporting, including the possibility of collusion or improper management override of controls, material misstatements due to error or fraud may not be prevented or detected on a timely basis. Also, projections of any evaluation of the effectiveness of the internal control over financial reporting to future periods are subject to the risk that the controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of the Company as of December 31, 2015 and 2014, and the results of its operations and its cash flows for each of the three years in the period ended December 31, 2015, in conformity with generally accepted accounting principles. Also, in our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of December 31, 2015, based on the criteria established in Internal Control-Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission.



/s/ DELOITTE & TOUCHE LLP

Costa Mesa, California
February 22, 2016


51



KAISER ALUMINUM CORPORATION AND SUBSIDIARY COMPANIES
CONSOLIDATED BALANCE SHEETS
 
 
December 31,
2015
 
December 31, 2014
 
 
(In millions of dollars, except share and per share amounts)
ASSETS
 
 
 
 
Current assets:
 
 
 
 
Cash and cash equivalents
 
$
72.5