Table of Contents

 

 

 

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

 

Form 10-Q

 

x      QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

For the quarterly period ended December 31, 2011

 

OR

 

o         TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

For the transition period from                      to                    

 

Commission file number: 001-11789

 

ENCISION INC.

(Exact name of registrant as specified in its charter)

 

Colorado

 

84-1162056

(State or other jurisdiction of

 

(I.R.S. Employer Identification No.)

incorporation or organization)

 

 

 

6797 Winchester Circle

Boulder, Colorado 80301

(Address of principal executive offices)

 

(303) 444-2600

(Registrant’s telephone number)

 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes x   No o

 

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).   Yes x   No o

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

 

Large accelerated filer o

 

Accelerated filer o

 

 

 

Non-accelerated filer o

 

Smaller reporting company x

(Do not check if a smaller reporting company)

 

 

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).Yes o   No x

 

Indicate the number of shares outstanding of each of the issuer’s classes of common equity, as of the latest practicable date:

 

Common Stock, no par value

 

6,455,100 Shares

(Class)

 

(outstanding at December 31, 2011)

 

 

 



Table of Contents

 

ENCISION INC.

 

FORM 10-Q

 

For the Three Months Ended December 31, 2011

 

INDEX

 

 

 

 

 

Page

 

 

 

 

Number

 

 

 

 

 

PART I.

 

FINANCIAL INFORMATION

 

 

 

 

 

 

ITEM 1

Condensed Interim Financial Statements:

 

 

 

Condensed Balance Sheets as of December 31, 2011 and March 31, 2011

3

 

 

Condensed Statements of Operations for the Three Months Ended December 31, 2011 and 2010

4

 

 

Condensed Statements of Operations for the Nine Months Ended December 31, 2011 and 2010

5

 

 

Condensed Statements of Cash Flows for the Nine Months Ended December 31, 2011 and 2010

6

 

 

Notes to Condensed Interim Financial Statements

7

 

 

 

 

 

 

ITEM 2

Management’s Discussion and Analysis of Financial Condition and Results of Operations

11

 

 

 

 

 

 

 

 

 

 

 

ITEM 4

Controls and Procedures

16

 

 

 

 

 

 

 

 

 

 

PART II.

 

OTHER INFORMATION

 

 

 

 

 

 

 

ITEM 5

Other Information (not previously reported in a Form 8-K)

17

 

 

 

 

 

 

ITEM 6

Exhibits

17

 

 

 

 

 

 

SIGNATURE

 

 

18

 

2



Table of Contents

 

PART I                  FINANCIAL INFORMATION

 

ITEM 1 —  CONDENSED INTERIM FINANCIAL STATEMENTS

 

Encision Inc.

Condensed Balance Sheets

(unaudited)

 

 

 

December 31,
2011

 

March 31,
2011

 

ASSETS

 

 

 

 

 

Current assets:

 

 

 

 

 

Cash and cash equivalents

 

$

6,227

 

$

120,008

 

Accounts receivable, net of allowance for doubtful accounts of $5,000 at December 31, 2011 and $9,000 at March 31, 2011

 

1,426,766

 

1,160,008

 

Inventories, net of reserve for obsolescence of $60,000 at December 31, 2011 and $60,000 at March 31, 2011

 

2,677,008

 

2,603,873

 

Prepaid expenses

 

75,296

 

74,635

 

Total current assets

 

4,185,297

 

3,958,524

 

Equipment, at cost:

 

 

 

 

 

Furniture, fixtures and equipment

 

3,126,154

 

2,578,637

 

Customer-site equipment

 

814,357

 

814,357

 

Accumulated depreciation

 

(2,411,105

)

(2,224,371

)

Equipment, net

 

1,529,406

 

1,168,623

 

Patents, net of accumulated amortization of $166,453 at December 31, 2011 and $157,971 at March 31, 2011

 

271,166

 

260,097

 

Other assets

 

 

23,624

 

TOTAL ASSETS

 

$

5,985,869

 

$

5,410,868

 

LIABILITIES AND SHAREHOLDERS’ EQUITY

 

 

 

 

 

Current liabilities:

 

 

 

 

 

Accounts payable

 

$

1,115,969

 

$

673,538

 

Accrued compensation

 

331,344

 

261,269

 

Other accrued liabilities

 

544,126

 

287,067

 

Line of credit

 

756,237

 

435,000

 

Total current liabilities

 

2,747,676

 

1,656,874

 

Commitments and contingencies

 

 

 

 

 

Shareholders’ equity:

 

 

 

 

 

Preferred stock, no par value: 10,000,000 shares authorized; none issued and outstanding

 

 

 

Common stock and additional paid-in capital, no par value: 100,000,000 shares authorized; 6,455,100 shares issued and outstanding

 

19,837,868

 

19,783,361

 

Accumulated (deficit)

 

(16,599,675

)

(16,029,367

)

Total shareholders’ equity

 

3,238,193

 

3,753,994

 

TOTAL LIABILITIES AND SHAREHOLDERS’ EQUITY

 

$

5,985,869

 

$

5,410,868

 

 

The accompanying notes to financial statements are an integral part of these condensed statements.

 

3



Table of Contents

 

Encision Inc.

Condensed Statements of Operations

(Unaudited)

 

Three Months Ended

 

December 31,
2011

 

December 31,
2010

 

NET REVENUE:

 

 

 

 

 

Product

 

$

2,688,625

 

$

2,916,808

 

Service

 

478,654

 

 

Total Revenue

 

3,167,279

 

2,916,808

 

COST OF REVENUE:

 

 

 

 

 

Product

 

1,195,418

 

1,095,667

 

Service

 

230,866

 

 

Total Cost of Revenue

 

1,426,284

 

1,095,667

 

GROSS PROFIT

 

1,740,995

 

1,821,141

 

OPERATING EXPENSES:

 

 

 

 

 

Sales and marketing

 

1,057,771

 

963,540

 

General and administrative

 

406,933

 

340,571

 

Research and development

 

338,461

 

269,491

 

Total operating expenses

 

1,803,165

 

1,573,602

 

OPERATING PROFIT (LOSS)

 

(62,170

)

247,539

 

Interest expense, net

 

(18,789

)

(14,010

)

Other income, net

 

402

 

393

 

Interest and other income, net

 

(18,387

)

(13,617

)

INCOME (LOSS) BEFORE PROVISION FOR INCOME TAXES

 

(80,557

)

233,922

 

Provision for income taxes

 

 

 

NET INCOME (LOSS)

 

$

(80,557

)

$

233,922

 

Net income (loss) per share—basic and diluted

 

$

 (0.01

)

$

 0.04

 

Weighted average shares—basic and diluted

 

6,455,100

 

6,455,100

 

 

The accompanying notes to financial statements are an integral part of these condensed statements.

 

4



Table of Contents

 

Encision Inc.

Condensed Statements of Operations

(Unaudited)

 

Nine Months Ended

 

December 31,
2011

 

December 31,
2010

 

NET REVENUE:

 

 

 

 

 

Product

 

$

8,352,200

 

$

8,646,540

 

Service

 

1,266,232

 

48,688

 

Total Revenue

 

9,618,432

 

8,695,228

 

COST OF REVENUE:

 

 

 

 

 

Product

 

3,981,338

 

3,150,734

 

Service

 

550,776

 

44,802

 

Total Cost of Revenue

 

4,532,114

 

3,195,536

 

GROSS PROFIT

 

5,086,318

 

5,499,692

 

OPERATING EXPENSES:

 

 

 

 

 

Sales and marketing

 

3,308,089

 

3,225,012

 

General and administrative

 

1,288,629

 

1,133,446

 

Research and development

 

1,011,226

 

1,136,040

 

Total operating expenses

 

5,607,944

 

5,494,498

 

OPERATING PROFIT (LOSS)

 

(521,626

)

5,194

 

Interest expense, net

 

(49,709

)

(36,792

)

Other income, net

 

1,027

 

1,357

 

Interest and other income, net

 

(48,682

)

(35,435

)

LOSS BEFORE PROVISION FOR INCOME TAXES

 

(570,308

)

(30,241

)

Provision for income taxes

 

 

 

NET LOSS

 

$

(570,308

)

$

(30,241

)

Net loss per share—basic and diluted

 

$

(0.09

)

$

0.00

 

Weighted average shares—basic and diluted

 

6,455,100

 

6,455,100

 

 

The accompanying notes to financial statements are an integral part of these condensed statements.

 

5



Table of Contents

 

Encision Inc.

Condensed Statements of Cash Flows

(Unaudited)

 

Nine Months Ended

 

December 31,
2011

 

December 31,
2010

 

Cash flows from operating activities:

 

 

 

 

 

Net loss

 

$

(570,308

)

$

(30,241

)

Adjustments to reconcile loss to net cash provided by operating activities:

 

 

 

 

 

Depreciation and amortization

 

195,216

 

195,623

 

Stock-based compensation expense related to stock options

 

54,507

 

79,204

 

Provision for doubtful accounts, net

 

(4,000

)

4,500

 

Provision for inventory obsolescence, net

 

 

(90,940

)

Change in operating assets and liabilities:

 

 

 

 

 

Accounts receivable

 

(262,758

)

169,450

 

Inventories

 

(73,135

)

91,870

 

Prepaid expenses and other assets

 

22,963

 

(45,042

)

Accounts payable

 

442,431

 

(303,770

)

Accrued compensation and other accrued liabilities

 

327,134

 

(46,358

)

Net cash provided by operating activities

 

132,050

 

24,296

 

Cash flows from investing activities:

 

 

 

 

 

Acquisition of property and equipment

 

(547,517

)

(174,899

)

Patent costs

 

(19,551

)

(5,995

)

Net cash (used in) investing activities

 

(567,068

)

(180,894

)

Cash flows from financing activities:

 

 

 

 

 

Borrowings from credit facility

 

321,237

 

97,367

 

Net cash provided by financing activities

 

321,237

 

97,367

 

Net decrease in cash and cash equivalents

 

(113,781

)

(59,231

)

Cash and cash equivalents, beginning of period

 

120,008

 

113,735

 

Cash and cash equivalents, end of period

 

$

6,227

 

$

54,504

 

 

The accompanying notes to financial statements are an integral part of these condensed statements.

 

6



Table of Contents

 

ENCISION INC.

 

NOTES TO CONDENSED INTERIM FINANCIAL STATEMENTS

 

DECEMBER 31, 2011

(Unaudited)

 

Note 1.   ORGANIZATION AND NATURE OF BUSINESS

 

Encision Inc. is a medical device company that designs, develops, manufactures and markets patented surgical instruments that provide greater safety to patients undergoing minimally-invasive surgery. We believe that our patented AEM® (Active Electrode Monitoring) surgical instrument technology is changing the marketplace for electrosurgical devices and instruments by providing a solution to a patient safety risk in laparoscopic surgery. Our sales to date have been made principally in the United States.

 

We have an accumulated deficit of $16,599,675 at December 31, 2011. Operating funds have been provided primarily by issuances of our common stock and warrants, and the exercise of stock options to purchase our common stock.Should our liquidity be diminished in the future because of operating losses, we may be required to seek additional capital in the future. There are no assurances that additional capital will be available to us on terms acceptable to us, or at all.

 

Our strategic marketing and sales plan is designed to expand the use of our products in surgically active hospitals and surgery centers in the United States.

 

Note 2.   SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES

 

Basis of Presentation.  The condensed interim financial statements included herein have been prepared by us, without audit, pursuant to the rules and regulations of the Securities and Exchange Commission (“SEC”). Certain information and footnote disclosures normally included in financial statements prepared in accordance with generally accepted accounting principles accepted in the United States (“GAAP”) have been condensed or omitted pursuant to such rules and regulations, although we believe that the disclosures made are adequate to make the information presented not misleading. The condensed interim financial statements and notes thereto should be read in conjunction with the financial statements and the notes thereto included in our Annual Report on Form 10-K for the fiscal year ended March 31, 2011, filed on June 15, 2011.

 

The accompanying condensed interim financial statements have been prepared, in all material respects, in conformity with the standards of accounting measurements and reflect, in the opinion of management, all adjustments necessary to summarize fairly the financial position and results of operations for such periods in accordance with GAAP. All adjustments are of a normal recurring nature. The results of operations for the most recent interim period are not necessarily indicative of the results to be expected for the full year.

 

Use of Estimates in the Preparation of Financial Statements.  The preparation of financial statements in conformity with GAAP requires management to make estimates and assumptions. Such estimates and assumptions affect the reported amounts of assets and liabilities as well as disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of sales and expense during the reporting period. Actual results could differ from those estimates.

 

Cash and Cash Equivalents.  For purposes of reporting cash flows, we consider all cash and highly liquid investments with an original maturity of three months or less to be cash equivalents.

 

Fair Value of Financial Instruments.  Our financial instruments consist of cash and cash equivalents, short-term trade receivables and payables and a line of credit. The carrying values of cash and cash equivalents, short-term trade receivables and payables approximate their fair value due to their short maturities. The interest rate associated with the line of credit is variable and based upon fluctuations of the prime rate, thus the carrying value approximates fair value.

 

Concentration of Credit Risk.  Financial instruments, which potentially subject us to concentrations of credit risk, consist of cash and cash equivalents, accounts receivable and a line of credit. The amount of cash on deposit with financial institutions does not exceed the $250,000 federally insured limit at December 31, 2011. However, we believe that in the event that cash on deposit exceeds $250,000, the financial institutions are financially sound and the risk of loss is minimal.

 

We have no significant off-balance sheet concentrations of credit risk such as foreign exchange contracts, options contracts or other foreign hedging arrangements. We maintain the majority of our cash balances with one financial institution in the form of demand deposits.

 

Accounts receivable are typically unsecured and are derived from transactions with and from entities in the healthcare industry primarily located in the United States. Accordingly, we may be exposed to credit risk generally associated with the healthcare industry. We maintain allowances for doubtful accounts for estimated losses resulting from the inability of our customers to make required payments. The net accounts receivable balance at December 31, 2011 of $1,426,766 included 21% from one customer. The net accounts receivable balance at March 31, 2011 of $1,160,008 included 13% from one customer.

 

Warranty Accrual.  We provide for the estimated cost of product warranties at the time sales are recognized. While we engage in extensive product quality programs and processes, including actively monitoring and evaluating the quality of our component suppliers, our warranty obligation is based upon historical experience and is also affected by product failure rates and material usage incurred in correcting a product failure. Should actual product failure rates or material usage costs differ from our estimates, revisions to the estimated warranty liability would be required. The warranty accrual balance at December 31, 2011 of approximately $190,000 increased principally as a result of our voluntary recall of product from the warranty accrual balance of $25,000 at March 31, 2011.

 

7



Table of Contents

 

Inventories.  Inventories are stated at the lower of cost (first-in, first-out basis) or market. We reduce inventory for estimated obsolete or unmarketable inventory equal to the difference between the cost of inventory and the estimated market value based upon assumptions about future demand and market conditions. If actual market conditions are less favorable than those projected by management, additional inventory write-downs may be required.  At December 31, 2011 and March 31, 2011, inventory consisted of the following:

 

 

 

December 31, 2011

 

March 31, 2011

 

Raw materials

 

$

1,794,192

 

$

1,576,706

 

Finished goods

 

942,816

 

1,087,167

 

Total gross inventories

 

2,737,008

 

2,663,873

 

Less reserve for obsolescence

 

(60,000

)

(60,000

)

Total net inventories

 

$

2,677,008

 

$

2,603,873

 

 

Property and Equipment. Property and equipment are stated at cost, with depreciation computed over the estimated useful lives of the assets, generally three to seven years. We use the straight-line method of depreciation for property and equipment. Leasehold improvements are depreciated over the shorter of the remaining lease term or the estimated useful life of the asset. Maintenance and repairs are expensed as incurred and major additions, replacements and improvements are capitalized.

 

Long-Lived Assets.  Long-lived assets are reviewed for impairment whenever events or changes in circumstances indicate that the carrying amount of an asset may not be recoverable. A long-lived asset is considered impaired when estimated future cash flows related to the asset, undiscounted and without interest, are insufficient to recover the carrying amount of the asset. If deemed impaired, the long-lived asset is reduced to its estimated fair value. Long-lived assets to be disposed of are reported at the lower of their carrying amount or estimated fair value less cost to sell.

 

Patents.  The costs of applying for patents are capitalized and amortized on a straight-line basis over the lesser of the patent’s economic or legal life (20 years from the date of application in the United States). Capitalized costs are expensed if patents are not issued. We review the carrying value of our patents periodically to determine whether the patents have continuing value and such reviews could result in the conclusion that the recorded amounts have been impaired.

 

Income Taxes.  We account for income taxes under the provisions of FASB Accounting Standards Codification (“ASC”) Topic 740, “Accounting for Income Taxes” (“ASC 740”). ASC 740 requires recognition of deferred income tax assets and liabilities for the expected future income tax consequences, based on enacted tax laws, of temporary differences between the financial reporting and tax bases of assets and liabilities. ASC 740 also requires recognition of deferred tax assets for the expected future tax effects of all deductible temporary differences, loss carryforwards and tax credit carryforwards. Deferred tax assets are then reduced, if deemed necessary, by a valuation allowance for the amount of any tax benefits which, more likely than not based on current circumstances, are not expected to be realized. As a result, no provision for income tax is reflected in the accompanying statements of operations. Should we achieve sufficient, sustained income in the future, we may conclude that some or all of the valuation allowance should be reversed. We are required to make many subjective assumptions and judgments regarding our income tax exposures. At December 31, 2011, we had no unrecognized tax benefits which would affect the effective tax rate if recognized and had no accrued interest or penalties related to uncertain tax positions.

 

Revenue Recognition.  Revenue from product sales is recorded when we ship the product and title has passed to the customer, provided that we have evidence of a customer arrangement and can conclude that collection is probable. Our shipping policy is FOB Shipping Point. We recognize revenue from sales to stocking distributors when there is no right of return, other than for normal warranty claims. We have no ongoing obligations related to product sales, except for normal warranty obligations. Revenue from engineering services is recognized when the service is performed.

 

Research and Development Expenses.  We expense research and development costs for products and processes as incurred.

 

Stock-Based Compensation.  Stock-based compensation is presented in accordance with the guidance of ASC Topic 718, “Compensation — Stock Compensation” (“ASC 718”). Under the provisions of ASC 718, companies are required to estimate the fair value of share-based payment awards on the date of grant using an option-pricing model. The value of the portion of the award that is ultimately expected to vest is recognized as expense over the requisite service periods in our statement of operations.

 

Stock-based compensation expense recognized under ASC 718 for the three months ended December 31, 2011 and 2010 was $10,166 and $26,544, respectively, and $54,507 and $79,204 for the nine months ended December 31, 2011 and 2010, respectively, which consisted of stock-based compensation expense related to grants of employee stock options.

 

Segment Reporting.  We have concluded that we have one operating segment.

 

Recent Accounting Pronouncements.  We have reviewed all recently issued, but not yet effective, accounting pronouncements and do not believe the future adoption of any such pronouncements may be expected to cause a material impact on our financial condition or the results of our operations.

 

Note 3.   BASIC AND DILUTED INCOME AND LOSS PER COMMON SHARE

 

We report both basic and diluted net income (loss) per share. Basic net income or loss per common share is computed by dividing net income or loss for the period by the weighted average number of common shares outstanding for the period. Diluted net income or loss per common share is computed by dividing the net income or loss for the period by the weighted average number of common and potential common shares outstanding during the period if the effect of the potential common shares is dilutive. The shares used in the calculation of dilutive potential common shares exclude options to purchase shares where the exercise price was greater than the average market price of common shares for the period.

 

The following table presents the calculation of basic and diluted net loss per share:

 

8



Table of Contents

 

 

 

Three Months Ended

 

Nine Months Ended

 

 

 

December 31,
2011

 

December 31,
2010

 

December 31,
2011

 

December 31,
2010

 

Net income (loss)

 

$

(80,557

)

$

233,922

 

$

(570,308

)

$

(30,241

)

Weighted-average shares — basic

 

6,455,100

 

6,455,100

 

6,455,100

 

6,455,100

 

Effect of dilutive potential common shares

 

 

 

 

 

Weighted-average shares — diluted

 

6,455,100

 

6,455,100

 

6,455,100

 

6,455,100

 

Net income (loss) per share — basic

 

$

(0.01

)

$

0.04

 

$

(0.09

)

$

0.00

 

Net income (loss) per share — diluted

 

$

(0.01

)

$

0.04

 

$

(0.09

)

$

0.00

 

Antidilutive employee stock options

 

725,000

 

545,000

 

725,000

 

545,000

 

 

Note 4.   COMMITMENTS AND CONTINGENCIES

 

We currently lease our facilities at 6797 Winchester Circle, Boulder, Colorado under noncancelable lease agreements through July 31, 2014. The minimum future lease payment, by fiscal year, as of December 31, 2011 is as follows:

 

Fiscal Year 

 

Amount

 

2012 (three months remaining)

 

$

73,247

 

2013

 

301,469

 

2014

 

320,080

 

2015

 

108,303

 

Total

 

$

803,099

 

 

Our minimum future equipment lease payments with General Electric Capital Corporation as of December 31, 2011, by fiscal year, are as follows:

 

Fiscal Year 

 

Amount

 

2012 (three months remaining)

 

$

25,469

 

2013

 

101,873

 

2014

 

8,488

 

Total

 

$

135,830

 

 

On November 11, 2011, we signed an amendment to our credit facility agreement with Silicon Valley Bank (“Silicon”), effective November 8, 2011. The terms of the credit facility include a line of credit for $2,000,000 for an interim period to December 23, 2011 at an interest rate calculated at Silicon’s prime rate, which was 4% at December 31, 2011, plus 1.25%, subject to increase upon a default. The credit facility is secured by any and all of our properties, rights and assets. Our borrowing under the credit facility is limited by our eligible receivables and inventory at the time of borrowing. The amendment has reduced our inventory borrowing base by $300,000. The credit facility requires us to meet certain financial covenants. As of December 31, 2011, we failed to meet the minimum defined quick debt ratio covenant. As a result, the lender has imposed a monthly maintenance fee, requires additional financial reporting and restricts our borrowings to the beginning of each week instead of when needed. At December 31, 2011, we had borrowed $756,237 from the credit facility and, under our eligible receivables and inventory limit, had an additional $256,000 available to borrow. On January 30, 2012, we entered into an amendment to our credit facility agreement with Silicon, effective January 23, 2012, pursuant to which Silicon has agreed to extend our credit facility through March 23, 2012, subject to the conditions set forth in the agreement. Our borrowing under the credit facility agreement is limited by our eligible receivables and inventory at the time of borrowing. The amendment provides that our inventory borrowing base is calculated as 35% of our eligible receivables, with a $400,000 limitation. Further, the amendment requires us to maintain an adjusted cash balance of $250,000. Under the amendment, our interest rate was increased to Silicon’s prime rate of 4% plus 3.5% and requires additional reporting requirements. We anticipate entering into a new credit facility agreement before our current agreement expires on March 23, 2012; however, we cannot predict with certainty that this will occur.

 

During the quarter ended September 30, 2011, we initiated a voluntary recall of electrode tips used in our AEM surgical systems after determining that certain tips could become susceptible to breaking off as a consequence of aggressive cleaning of the tip. In connection with the voluntary recall, we provided customers with sales credits to use for purchases of our products. At December 31, 2011, approximately $140,000 of credits has not been redeemed.

 

Aside from the recall credits, operating leases and credit facility commitments, we do not have any material contractual commitments requiring settlement in the future.

 

We are subject to regulation by the United States Food and Drug Administration (“FDA”). The FDA provides regulations governing the manufacture and sale of our products and regularly inspects us and other manufacturers to determine compliance with these regulations. We believe that we were in substantial compliance with all known regulations as of December 31, 2011. FDA inspections are conducted periodically at the discretion of the FDA. Our latest inspection by the FDA occurred in November 2009.

 

Note 5.   SHARE-BASED COMPENSATION

 

The provisions of ASC 718-10-55 requires the measurement and recognition of compensation expense for all share-based payment awards made to our employees and directors, including employee stock options, based on estimated fair values. The following table summarizes stock-based compensation expense related to employee stock options and employee stock purchases for the three months ended December 31, 2011 and 2010, which was allocated as follows:

 

9



Table of Contents

 

 

 

Three Months Ended

 

Nine Months Ended

 

 

 

December 31,
2011

 

December 31,
2010

 

December 31,
2011

 

December 31,
2010

 

Cost of sales

 

$

734

 

$

823

 

$

2,202

 

$

2,469

 

Sales and marketing

 

(2,447

)

3,268

 

2,577

 

9,804

 

General and administrative

 

9,029

 

18,731

 

41,177

 

55,765

 

Research and development

 

2,850

 

3,722

 

8,551

 

11,166

 

Stock-based compensation expense

 

$

10,166

 

$

26,544

 

$

54,507

 

$

79,204

 

 

The Black-Scholes model requires the use of actual employee exercise behavior data and the application of a number of assumptions, including expected volatility, risk-free interest rate and expected dividends. Stock options of 20,000 and 235,000 were granted during the three and nine months ended December 31, 2011, respectively.

 

As of December 31, 2011, $222,000 of total unrecognized compensation costs related to nonvested stock options is expected to be recognized over a period of five years.

 

Note 6.   RELATED PARTY TRANSACTION

 

We paid consulting fees of $17,969 and $59,260 to an entity owned by one of our directors during the three and nine months ended December 31, 2011, respectively, and $15,096 and $47,480 during the three and nine months ended December 31, 2010, respectively.

 

Note 7.   SUBSEQUENT EVENTS

 

Except for the event explained below, we evaluated all of our activity and concluded that no subsequent events have occurred that would require recognition in our financial statements or disclosed in the notes to our financial statements.

 

On January 30, 2012, we entered into an amendment to our credit facility agreement with Silicon, effective January 23, 2012, pursuant to which Silicon has agreed to extend our credit facility through March 23, 2012, subject to the conditions set forth in the agreement. Our borrowing under the credit facility agreement is limited by our eligible receivables and inventory at the time of borrowing. The amendment provides that our inventory borrowing base is calculated as 35% of our eligible receivables, with a $400,000 limitation. Further, the amendment requires us to maintain an adjusted cash balance of $250,000. Under the amendment, our interest rate was increased to Silicon’s prime rate of 4% plus 3.5% and requires additional reporting requirements.

 

10



Table of Contents

 

ITEM 2   —  MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

 

Certain statements contained in this section on Management’s Discussion and Analysis are not historical facts, including statements about our strategies and expectations with respect to new and existing products, market demand, acceptance of new and existing products, marketing efforts, technologies and opportunities, market and industry segment growth, and return on investments in products and markets. These statements are forward looking statements within the meaning of the Private Securities Litigation Reform Act of 1995 and involve substantial risks and uncertainties that may cause actual results to differ materially from those indicated by the forward looking statements. All forward looking statements in this section on Management’s Discussion and Analysis are based on information available to us on the date of this document, and we assume no obligation to update such forward looking statements. Readers of this Form 10-Q are strongly encouraged to review the section entitled “Risk Factors” in our Form 10-K for the fiscal year ended March 31, 2011.

 

General

 

Encision Inc., a medical device company based in Boulder, Colorado, has developed and launched innovative technology that is emerging as a standard of care in minimally-invasive surgery. We believe that our patented AEM® (Active Electrode Monitoring) surgical instruments are changing the marketplace for electrosurgical devices and laparoscopic instruments by providing a solution to a well documented patient safety risk in laparoscopic surgery.

 

We were founded to address market opportunities created by the increase in minimally-invasive surgery (“MIS”) and surgeons’ preference for using electrosurgery devices in these procedures. The product opportunity was created by surgeons’ continued widespread demand for using monopolar electrosurgery instruments, which, when used in laparoscopic surgery, are susceptible to causing inadvertent collateral tissue damage outside the surgeon’s field of view. The risk of unintended electrosurgical burn injury to the patient in laparoscopic surgery has been well documented. This risk poses a threat to patient safety and creates liability exposure for surgeons and hospitals that do not adequately address the issue.

 

Our patented AEM technology provides surgeons with the desired tissue effects, while preventing stray electrosurgical energy that can cause unintended and unseen tissue injury. AEM laparoscopic instruments are equivalent to conventional instruments in functionality, but they incorporate “active electrode monitoring” technology to dynamically and continuously monitor the flow of electrosurgical current, thereby helping to prevent patient injury. With our “shielded and monitored” instruments, surgeons are able to perform electrosurgical procedures more safely and effectively than when using conventional instruments. In addition, our AEM instruments are cost competitive with conventional “non-shielded, non-monitored” instruments. The result is advanced patient safety at comparable cost and with no change in surgeon technique.

 

AEM technology has been recommended and endorsed by sources from various groups involved in MIS. Surgeons, nurses, biomedical engineers, the medicolegal community, malpractice insurance carriers and electrosurgical device manufacturers advocate the use of AEM technology. Recommendations from the malpractice insurance and medicolegal communities complement the broad clinical endorsements AEM technology has garnered over the past few years.

 

We have focused our marketing strategies to date on expanding the market awareness of the AEM technology and our broad independent endorsements and have continued efforts to improve and expand the AEM product line. Accordingly, we are currently focusing on updating our accepted AEM instruments to include ergonomics and user functionalities for which surgeons have been expressing a preference. When a hospital or surgery center changes to AEM technology, we receive recurring sales from sales of replacement instruments. We believe that there is no directly competing technology to supplant AEM products. The replacement market of reusable and disposable AEM products in hospitals and surgery centers that use our AEM technology represented over 90% of our sales during the nine months ended December 31, 2011. This sales stream is expected to grow as the base of accounts that switch to AEM technology continues to grow. In addition, we intend to develop disposable versions of more of our AEM products in order to meet market demands and expand our sales opportunities.

 

We have an accumulated deficit of $16,599,675 at December 31, 2011. Operating funds have been provided primarily by issuances of our common stock and warrants, the exercise of stock options to purchase our common stock. Should our liquidity be diminished in the future because of operating losses, we may be required to seek additional capital in the future.

 

During the nine months ended December 31, 2011, we provided $132,050 of cash from our operations and used $547,517 for investments in property and equipment. As of December 31, 2011, we had $6,227 in cash and cash equivalents available to fund future operations, a decrease of $113,781 from March 31, 2011. As of December 31, 2011, we borrowed $756,237 from our $2,000,000 amended credit facility, an increase of $321,237 from March 31, 2011. Our working capital was $1,437,621 at December 31, 2011 compared to $2,301,650 at March 31, 2011.

 

Historical Perspective

 

We were organized in 1991 and spent several years developing the AEM monitoring system and protective sheaths to adapt to conventional electrosurgical instruments. During this period, we conducted product trials and applied for patents with the United States Patent Office and international patent agencies. Patents were issued to us in 1994, 1996, 1997, 1998, 2002 and 2009.

 

As we evolved, it became clear to us that our AEM technology needed to be integrated into the standard laparoscopic instrument design. As the development program proceeded, it also became apparent that the merging of electrical and mechanical engineering skills in the instrument development process for our patented, integrated electrosurgical instruments was a complex and difficult task. As a result, instruments with integrated AEM technology were not completed for several years. Prior to offering a full range of laparoscopic electrosurgical instrumentation, it was difficult for hospitals to commit to the AEM solution, as we did not have adequate comparable surgical instrument options to meet surgeons’ demands. As of fiscal year 2005, a sufficiently broad product line was available to provide surgical suites with AEM instruments in most of the designs common for laparoscopic surgery.

 

After the launch of this line of AEM instruments over the past nine years, we continue our focus on developing next generation versions of our AEM instruments to better meet market demands, particularly the demand for improved ergonomics and simplified

user functionalities. This strategy coincides with the independent endorsements of our AEM technology and the recommendations from the malpractice insurance and medicolegal

 

11



Table of Contents

 

communities.

 

Outlook

 

Installed Base of AEM Monitoring Equipment:  We believe that sales of our installed base of AEM products will increase sales as the inherent risks associated with monopolar laparoscopic electrosurgery become more widely acknowledged and as we focus on increasing our sales efficiency. We expect that the replacement sales of electrosurgical instruments and accessories will also increase as additional facilities adopt AEM technology. We anticipate that the efforts to improve the productivity of sales representatives carrying the AEM product line, along with the introduction of next generation products, may provide the basis for increased sales and profitable operations. However, these measures, or any others that we may adopt, may not result in either increased sales or profitable operations.

 

We believe that the unique performance of the AEM technology and our breadth of independent endorsements provide an opportunity for continued market share growth. In our view, market awareness and awareness of the clinical credibility of the AEM technology, as well as awareness of our endorsements, are continually improving, and we expect this awareness to benefit our sales efforts for the remainder of fiscal year 2012. Our objectives in the remainder of fiscal year 2012 are to reduce expenses while optimizing sales execution, to expand market awareness of the AEM technology and to maximize the number of additional hospital and surgery center accounts switching to AEM instruments while retaining existing customers. In addition, acceptance of AEM products depends on surgeons’ preference for our instruments, which depends on factors such as ergonomics and ease of use in addition to the technological and safety advantages of AEM products. If surgeons prefer other instruments to our instruments, our business results will suffer.

 

Possibility of Operating Losses:  We have an accumulated deficit of $16,599,675 at December 31, 2011. Operating funds have been provided primarily by issuances of our common stock and warrants, and the exercise of stock options to purchase our common stock.. Should our liquidity be diminished in the future because of operating losses, we may be required to seek additional capital. We have made strides toward improving our operating results but due to the ongoing need to develop, optimize and train our direct sales managers and the independent sales representative network, the need to support the development of refinements to our product line, and the need to increase sustained sales to a level adequate to cover fixed and variable operating costs, we may operate at a net loss. Sustained losses, or our inability to generate sufficient cash flow from operations to fund our obligations, may result in a need to raise additional capital.

 

Revenue Growth:  Our product revenue growth has decreased from weakness in the medical device industry as a result of a decrease in the number of laparoscopic procedures. We expect to generate increased product revenue in the U.S. from sales to new customers and from expanded sales to existing customers as the medical device industry stabilizes and our network of direct and independent sales representatives becomes more efficient. We believe that the visibility and credibility of the independent clinical endorsements for AEM technology will contribute to new accounts and increased product revenue in fiscal year 2012. We also expect to increase market share through promotional programs of placing our AEM monitors at no charge into hospitals that commit to standardize AEM instruments. However, all of these efforts to increase market share and grow product revenue will depend in part on our ability to expand the efficiency and effective coverage range of our direct and independent sales representatives. Increased service revenue represents design and development service revenue from our agreements with Intuitive Surgical, Inc. and Boston Scientific Corporation due to our efforts to obtain increased revenue by working with strategic partners. We expect that this level of service revenue will approximately continue throughout the remainder of fiscal year 2012.

 

We also have longer term initiatives in place to improve our prospects. We expect that development of next generation versions of our AEM products will better position our products in the marketplace and improve our retention rate at hospitals and surgery centers that have changed to AEM technology, enabling us to grow our sales. We are exploring overseas markets to assess opportunities for sales growth internationally. Finally, we intend to explore opportunities to capitalize on our proven AEM technology via licensing arrangements and strategic alliances. These efforts to generate additional sales and further the market penetration of our products are longer term in nature and may not materialize. Even if we are able to successfully develop next generation products or identify potential international markets or strategic partners, we may not be able to capitalize on these opportunities.

 

Gross Profit and Gross Margins:  Gross profit and gross margins can be expected to fluctuate from quarter to quarter as a result of product sales mix, sales volume and development revenue. Gross margins on products manufactured or assembled by us are expected to improve at higher levels of production and sales.

 

Manufacturing:  As sales increase, we expect to increase gross profit and gross margins by manufacturing our scissor inserts internally.

 

Sales and Marketing Expenses: We continue our efforts to expand domestic and international distribution capability, and we believe that sales and marketing expenses will decrease as a percentage of net sales with increasing sales volume.

 

Research and Development Expenses: Research and development expenses are expected to increase to support development of refinements to our AEM product line, which will further expand the instrument options for surgeons.

 

Results of Operations

 

For the three months ended December 31, 2011 compared to the three months ended December 31, 2010.

 

Product Revenue.  Product revenue for the quarter ended December 31, 2011 was $2,688,625 compared to $2,916,808 for the quarter ended December 31, 2010, a decrease of 8%. The decrease is attributable to weakness in the medical device industry and to business lost from accounts that stopped using AEM technology and to outside reprocessors who reprocess our products for resale. This was partially offset by addition of new accounts. We opened seven new accounts for AEM technology in the three months ended December 31, 2011 versus six new accounts for AEM technology in the three months ended December 31, 2010.

 

12



Table of Contents

 

Service Revenue.  Service revenue for the quarter ended December 31, 2011 was $478,654 compared to none for the quarter ended December 31, 2010. Service revenue represents design and development service revenue from our agreements with Intuitive Surgical, Inc. and Boston Scientific Corporation due to our efforts to obtain increased revenue by working with strategic partners.

 

Gross profit.  Product gross profit for the quarter ended December 31, 2011 of $1,493,207 represented a decrease of 18% from gross profit of $1,821,141 for the quarter ended December 31, 2010. Gross profit as a percentage of sales (gross margins) decreased from 62% for the quarter ended December 31, 2010 to 56% for the quarter ended December 31, 2011. The gross profit margin decrease from the third quarter of fiscal year 2011 was due to higher material costs, and higher unit overhead costs as a result of lower product revenue volume was due to higher material costs, and higher unit overhead costs as a result of lower product revenue volume.

 

Service gross profit for the quarter ended December 31, 2011 of $247,788 represented an increase of $247,788 from no gross profit for the quarter ended December 31, 2010.

 

Sales and marketing expenses.  Sales and marketing expenses of $1,057,771 for the quarter ended December 31, 2011 represented an increase of 10% from sales and marketing expenses of $963,540 for the quarter ended December 31, 2010. The increase was the result of increased compensation of our direct sales representatives, as a result of an increase in direct sales representatives and increased travel and meals. The increase in such costs was partially offset by a reclassification of one person from our sales classification into our general and administrative classification, and reduced marketing fees.

 

General and administrative expenses.  General and administrative expenses of $406,933 for the quarter ended December 31, 2011 represented an increase of 19% from general and administrative expenses of $340,571 for the quarter ended December 31, 2010. The increase was the result of a reclassification of one person from our sales classification into our general and administrative classification and an increase of outside services.

 

Research and development expenses.  Research and development expenses of $338,461 for the quarter ended December 31, 2011 represented an increase of 26% compared to $269,491 for the quarter ended December 31, 2010. The increase was the result of an increase in inventory usage and test materials.

 

Net loss.  Net loss was $80,557 for the quarter ended December 31, 2011 compared to net income of $233,922 for the quarter ended December 31, 2010. The net loss was a result, primarily, of lower gross profit margins and an increase in operating expenses. The net loss was partially offset by the contribution of service revenue, as discussed above.

 

For the nine months ended December 31, 2011 compared to the nine months ended December 31, 2010.

 

Product Revenue.  Product revenue for the nine months ended December 31, 2011 was $8,352,200 compared to $8,646,540 for the nine months ended December 31, 2010, a decrease of 3%. The decrease is attributable to weakness in the medical device industry and to business lost from accounts that stopped using AEM technology and to outside reprocessors who reprocess our product for resale. This was partially offset by the addition of new accounts. We opened 21 new accounts for AEM technology in the three months ended December 31, 2011 versus 15 new accounts for AEM technology in the nine months ended December 31, 2010.

 

Service Revenue.  Service revenue for the nine months ended December 31, 2011 was $1,266,232 compared to $48,688 for the nine months ended December 31, 2010, an increase of $1,217,544. Service revenue represents design and development service revenue from our agreements with Intuitive Surgical, Inc. and Boston Scientific Corporation due to our efforts to obtain increased revenue by working with strategic partners.

 

Gross profit.  Product gross profit for the nine months ended December 31, 2011 of $4,370,862 represented a decrease of 20% from gross profit of $5,495,806 for the nine months ended December 31, 2010. Gross profit as a percentage of sales (gross margins) decreased from 64% for the nine months ended December 31, 2010 to 52% for the nine months ended December 31, 2011. The gross profit margin decrease from the first nine months of fiscal year 2011 was due was due to higher material costs, higher unit overhead costs as a result of lower product revenue volume, and a one-time charge of $430,000, which occurred in the second quarter ended September 30, 2011, for a voluntary recall of certain electrode product. Service gross profit for the nine months ended December 31, 2011 of $715,456 represented an increase of $711,570 from gross profit of $3,886 for the nine months ended December 31, 2010.

 

Sales and marketing expenses.  Sales and marketing expenses of $3,308,089 for the nine months ended December 31, 2011 represented an increase of 3% from sales and marketing expenses of $3,225,012 for the nine months ended December 31, 2010. The increase was the result of an increase in public relations costs, recruiting fees, sales samples and travel and meals. The increase in such costs was partially offset by decreased commissions for independent sales representatives and reduced marketing fees.

 

General and administrative expenses.  General and administrative expenses of $1,288,629 for the nine months ended December 31, 2011 represented an increase of 14% from general and administrative expenses of $1,133,446 for the nine months ended December 31, 2010. The increase was the result of an increase in severance cost and a reclassification of one person from our sales classification into our general and administrative classification. The increase in such costs was partially offset by a decrease in compensation.

 

Research and development expenses.  Research and development expenses of $1,011,226 for the nine months ended December 31, 2011 represented a decrease of 11% compared to $1,136,040 for the nine months ended December 31, 2010. The decrease was the result of a decrease in outside services. The decrease in such costs was partially offset by increased compensation, inventory and test materials usage, and small tool costs.

 

Net loss.  Net loss was $570,308 for the nine months ended December 31, 2011 compared to a net loss of $30,241 for the nine months ended December 31, 2010. The net loss was a result, primarily, of the recall cost, lower gross profit margins and an increase in operating expenses. The net loss was partially offset by the contribution of service revenue, as discussed above.

 

The results of operations for the three months ended December 31, 2011 are not indicative of the results of operations for all or any part of the balance of the fiscal year.

 

13



Table of Contents

 

Liquidity and Capital Resources

 

At December 31, 2011, operating funds have been provided primarily by issuances of our common stock and warrants, and the exercise of stock options to purchase our common stock.. Operating funds totaled $19,837,868 from our inception through December 31, 2011.

 

On November 11, 2011, we signed an amendment to our credit facility agreement with Silicon Valley Bank (“Silicon”), effective November 8, 2011. The terms of the credit facility include a line of credit for $2,000,000 for an interim period to December 23, 2011 at an interest rate calculated at Silicon’s prime rate, which was 4% at December 31, 2011, plus 1.25%, subject to increase upon a default. The credit facility is secured by any and all of our properties, rights and assets. Our borrowing under the credit facility is limited by our eligible receivables and inventory at the time of borrowing. The amendment has reduced our inventory borrowing base by $300,000. The credit facility requires us to meet certain financial covenants. As of December 31, 2011, we failed to meet the minimum defined quick debt ratio covenant. As a result, the lender has imposed a monthly maintenance fee, requires additional financial reporting and restricts our borrowings to the beginning of each week instead of when needed. On January 30, 2012, we entered into an amendment to our credit facility agreement with Silicon, effective January 23, 2012, pursuant to which Silicon has agreed to extend our credit facility through March 23, 2012, subject to the conditions set forth in the agreement. Our borrowing under the credit facility agreement is limited by our eligible receivables and inventory at the time of borrowing. The amendment provides that our inventory borrowing base is calculated as 35% of our eligible receivables, with a $400,000 limitation. Further, the amendment requires us to maintain an adjusted cash balance of $250,000. Under the amendment, our interest rate was increased to Silicon’s prime rate of 4% plus 3.5% and requires additional reporting requirements. At December 31, 2011, we had borrowed $756,237 from the credit facility and, under our eligible receivables and inventory limit, had an additional $256,000 available to borrow. We anticipate entering into a new credit facility agreement before our current agreement expires on March 23, 2012; however, we cannot predict with certainty that this will occur.

 

Our operations provided $132,050 of cash during the nine months ended December 31, 2011 on net revenue of $9,618,432. Cash was provided by increased accounts payable, accrued compensation and other liabilities. Cash provided was partially offset by an increase to accounts receivable. The amounts of cash used by operations for the three months ended December 31, 2011 are not indicative of the expected amounts of cash to be generated from or used in operations in fiscal year 2012. During the three months ended December 31, 2011, we invested $547,517 in the acquisition of property and equipment. As of December 31, 2011, we had $6,227 in cash and cash equivalents available to fund future operations and had borrowed $756,237 from our credit facility. Working capital was $1,437,621 at December 31, 2011 compared to $2,301,650 at March 31, 2011. Current liabilities were $2,747,676 at December 31, 2011, compared to $1,656,874 at March 31, 2011. The increase in current liabilities at December 31, 2011 was caused by increasing borrowings from our line of credit and an increase to accounts payable, accrued compensation and other accrued liabilities.

 

If we are not successful in maintaining profitability and positive cash flow, additional capital may be required to maintain ongoing operations. We have explored and are continuing to explore options to provide additional financing to fund future operations as well as other possible courses of action. Such actions include, but are not limited to, securing additional lines of credit, sales of debt or equity securities (which may result in dilution to existing shareholders), licensing of technology, strategic alliances and other similar actions. There can be no assurance that we will be able to obtain additional funding (if needed), on acceptable terms or at all, through a sale of our common stock, loans from financial institutions or other third parties, or any of the actions discussed above. If we cannot sustain profitable operations, and additional capital is unavailable, lack of liquidity could have a material adverse effect on our business viability, financial position, results of operations and cash flows.

 

We currently lease our facilities at 6797 Winchester Circle, Boulder, Colorado under noncancelable lease agreements through July 31, 2014. The minimum future lease payment by fiscal year as of December 31, 2011 is as follows:

 

Fiscal Year 

 

Amount

 

2012 (three months remaining)

 

$

73,247

 

2013

 

301,469

 

2014

 

320,080

 

2015

 

108,303

 

Total

 

$

803,099

 

 

Our minimum future equipment lease payments with General Electric Capital Corporation as of December 31, 2011, by fiscal year, are as follows:

 

Fiscal Year 

 

Amount

 

2012 (three months remaining)

 

$

25,469

 

2013

 

101,873

 

2014

 

8,488

 

Total

 

$

135,830

 

 

As of December 31, 2011, the following table shows our contractual obligations for the periods presented:

 

 

 

Payment due by period

 

Contractual obligations 

 

Totals

 

Less than 1 year

 

1-3 years

 

3-5 years

 

More than 5 years

 

Line of credit obligations

 

$

756,237

 

$

756,237

 

$

 

$

 

$

 

Operating lease obligations

 

938,929

 

401,223

 

537,706

 

 

 

Total

 

$

1,695,166

 

$

1,157,460

 

$

537,706

 

$

 

$

 

 

Aside from the operating leases and credit facility commitments, we do not have any material contractual commitments requiring settlement in the future.

 

14



Table of Contents

 

Our fiscal year 2012 operating plan is focused on increasing new accounts, retaining existing customers, growing sales, increasing gross profits and conserving cash. We are investing in research and development efforts to develop next generation versions of the AEM product line. We have invested in manufacturing property and equipment to manufacture disposable scissors inserts internally and reduce our cost of sales. We cannot predict with certainty the expected sales, gross profit, net income or loss and usage of cash and cash equivalents for fiscal year 2012. On January 30, 2012, we signed an amendment to our credit facility agreement with Silicon, effective January 23, 2012,pursuant to which Silicon has agreed to extend our credit facility through March 23, 2012. We intend to enter into a new credit facility agreement prior to the expiration of the current credit facility. Unless our line of credit is not renewed on March 23, 2012, we believe that our cash resources and credit facility will be sufficient to fund our operations for at least the next twelve months. If we are unable to manage our business operations in line with budget expectations, it could have a material adverse effect on our business viability, financial position, results of operations and cash flows. If we are not successful in continuing profitability and positive cash flow, and renewing our line of credit, additional capital may be required to maintain ongoing operations.

 

Income Taxes

 

As of March 31, 2011, net operating loss carryforwards totaling approximately $13.3 million are available to reduce taxable income in the future. The net operating loss carryforwards expire, if not previously utilized, at various dates beginning in the fiscal year ending March 31, 2012. We have not paid income taxes since our inception. The Tax Reform Act of 1986 and other income tax regulations contain provisions which may limit the net operating loss carryforwards available to be used in any given year if certain events occur, including changes in ownership interests. We have established a valuation allowance for the entire amount of our deferred tax asset since inception due to our history of losses. Should we achieve sufficient, sustained income in the future, we may conclude that some or all of the valuation allowance should be reversed. If some or all of the valuation allowance were reversed, then, to the extent of the reversal, a tax benefit would be recognized which would result in an increase to net income.

 

Critical Accounting Policies and Estimates

 

Our discussion and analysis of our financial condition and results of operations are based upon our financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States. The preparation of these financial statements requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, sales and expenses, and related disclosure of contingent assets and liabilities. On an on-going basis, we evaluate our estimates, including those related to bad debts, inventories, sales returns, warranty, contingencies and litigation. We base our estimates on historical experience and on various other assumptions that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions. We believe the following critical accounting policies affect the more significant judgments and estimates used in the preparation of our financial statements.

 

We maintain allowances for doubtful accounts for estimated losses resulting from the inability of our customers to make required payments. If the financial condition of our customers were to deteriorate, resulting in an impairment of their ability to make payments, additional allowances would be required, which would increase our expenses during the periods in which any such allowances were made. The amount recorded as a provision for bad debts in each period is based upon our assessment of the likelihood that we will be paid on our outstanding receivables, based on customer-specific as well as general considerations. To the extent that our estimates prove to be too high, and we ultimately collect a receivable previously determined to be impaired, we may record a reversal of the provision in the period of such determination.

 

We provide for the estimated cost of product warranties at the time sales are recognized. While we engage in extensive product quality programs and processes, including actively monitoring and evaluating the quality of our component suppliers, we have experienced some costs related to warranties. The warranty accrual is based on historical experience and is adjusted based on current experience. Should actual warranty experience differ from our estimates, revisions to the estimated warranty liability would be required.

 

We reduce inventory for estimated obsolete or unmarketable inventory equal to the difference between the cost of inventory and the estimated market value based on assumptions about future demand and market conditions. If actual market conditions are less favorable than those projected by management, additional inventory write-downs may be required. Any write-downs of inventory would reduce our reported net income during the period in which such write-downs were applied. To the extent that our estimates prove to be too high, and we ultimately utilize or sell inventory previously determined to be impaired, we may record a reversal of the provision in the period of such determination.

 

We recognize deferred income tax assets and liabilities for the expected future income tax consequences, based on enacted tax laws, of temporary differences between the financial reporting and tax bases of assets and liabilities. Deferred tax assets are then reduced, if deemed necessary, by a valuation allowance for the amount of any tax benefits which, more likely than not based on current circumstances, are not expected to be realized. Should we maintain sufficient, sustained income in the future, we may conclude that all or some of the valuation allowance should be reversed.

 

Property and equipment are stated at cost, with depreciation computed over the estimated useful lives of the assets, generally three to seven years. We use the straight-line method of depreciation for property and equipment. Leasehold improvements are depreciated over the shorter of the remaining lease term or the estimated useful life of the asset. Maintenance and repairs are expensed as incurred and major additions, replacements and improvements are capitalized.

 

We amortize our patent costs over their estimated useful lives, which is typically the remaining statutory life. From time to time, we may be required to adjust these useful lives of our patents based on advances in technology, competitor actions, and the like. We review the recorded amounts of patents at each period end to determine if their carrying amount is still recoverable based on our expectations regarding sales of related products. Such an assessment, in the future, may result in a conclusion that the assets are impaired, with a corresponding charge against earnings.

 

We currently estimate forfeitures for stock-based compensation expense related to employee stock options at 17.5% and evaluate the forfeiture rate quarterly. Other assumptions that are used in calculating stock-based compensation expense include risk-free interest rate, expected life, expected volatility and expected dividend.

 

15



Table of Contents

 

ITEM 4   —   CONTROLS AND PROCEDURES

 

(a)  We have carried out an evaluation under the supervision and with the participation of our management, including our Chief Executive Officer and Principal Accounting and Financial Officer, of the effectiveness of our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) of the Securities and Exchange Act of 1934 (the “Exchange Act”)). Based upon that evaluation, the Chief Executive Officer and the Principal Accounting and Financial Officer concluded that, as of December 31, 2011, our disclosure controls and procedures were effective.

 

(b)  During the quarter ended December 31, 2011, there were no changes in our internal control over financial reporting that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

 

16



Table of Contents

 

PART II.                                                OTHER INFORMATION

 

ITEM 5.                                                     Other Information (not previously reported in a Form 8-K)

 

On January 30, 2012, Encision Inc. (the “Registrant”) entered into an amendment to our credit facility agreement with Silicon Valley Bank (“Silicon”), effective January 23, 2012, pursuant to which Silicon has agreed to extend our credit facility through March 23, 2012, subject to the conditions set forth in the agreement.

 

Our borrowing under the credit facility agreement is limited by our eligible receivables and inventory at the time of borrowing. The amendment has reduced our inventory borrowing base to the lower of 35% of our eligible receivables or $40,000. Further, the amendment requires us to maintain an adjusted liquidity of $250,000. Under the amendment, our interest rate was increased from Silicon’s prime rate of 4% plus 4.5% and requires additional reporting requirements.

 

ITEM 6                                                        EXHIBITS

 

The following exhibits are filed with this report on Form 10-Q or are incorporated by reference:

 

10.2             Amendment to Loan Documents, dated January 23, 2012

 

31.1             Certification of Chief Executive Officer under Rule 13a-14(a) of the Exchange Act (filed herewith).

 

31.2             Certification of Principal Financial and Accounting Officer under Rule 13a-14(a) of the Exchange Act (filed herewith).

 

32.1             Certifications of Chief Executive Officer and Principal Financial and Accounting Officer pursuant to Section 906 of the Sarbanes-Oxley Act of 2002 (filed herewith).

 

101                The following materials from Encision Inc.’s Quarterly Report on Form 10-Q for the quarter ended December 31, 2011, formatted in XBRL (Extensible Business Reporting Language): (i) the unaudited Condensed Balance Sheets, (ii) the unaudited Condensed Statements of Income, (iii) the unaudited Condensed Statements of Cash Flows, and (iv) Notes to Condensed Financial Statements, tagged at Level I.

 

Users of the XBRL data are advised pursuant to Rule 406T of Regulation S-T that this interactive data file is deemed not filed or part of a registration statement or prospectus for purposes of sections 11 or 12 of the Securities Act of 1933, is deemed not filed for purposes of section 18 of the Securities Exchange Act of 1934, and otherwise is not subject to liability under these sections.

 

17



Table of Contents

 

SIGNATURE

 

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

 

 

Encision Inc.

 

 

 

 

 

 

 

 

February 3, 2012

 

/s/ Marcia McHaffie

Date

 

Marcia McHaffie

 

 

Controller

 

 

Principal Accounting Officer &

 

 

Principal Financial Officer

 

18